Siehe Spezifikationen für Produktdetails.
FDM47-06KC5
Product Overview
- Category: Electronic Component
- Use: Power Management
- Characteristics: High efficiency, compact size, reliable performance
- Package: Surface Mount
- Essence: Voltage Regulator
- Packaging/Quantity: Tape & Reel, 3000 units per reel
Specifications
- Input Voltage Range: 4.5V to 28V
- Output Voltage: 3.3V
- Output Current: 6A
- Operating Temperature Range: -40°C to 125°C
- Efficiency: Up to 95%
Detailed Pin Configuration
- Pin 1: VIN (Input Voltage)
- Pin 2: GND (Ground)
- Pin 3: EN (Enable)
- Pin 4: FB (Feedback)
- Pin 5: SS/TRK (Soft Start/Tracking)
- Pin 6: VOUT (Output Voltage)
Functional Features
- Integrated MOSFET Switches
- Adjustable Soft Start
- Overcurrent Protection
- Thermal Shutdown
Advantages and Disadvantages
- Advantages:
- High Efficiency
- Wide Input Voltage Range
- Compact Size
- Integrated Protection Features
- Disadvantages:
- Limited Output Current
- Sensitive to ESD
Working Principles
The FDM47-06KC5 is a voltage regulator that utilizes pulse-width modulation (PWM) to regulate the output voltage. It adjusts the duty cycle of the internal switches to maintain a stable output voltage despite variations in the input voltage and load conditions.
Detailed Application Field Plans
- Industrial Automation: Powering control systems and motor drives
- Telecommunications: Providing regulated power for networking equipment
- Automotive Electronics: Voltage regulation for infotainment systems and advanced driver-assistance systems
Detailed and Complete Alternative Models
- LM2678-3.3: Similar specifications and package type
- MP2307: Comparable performance and features
This comprehensive entry provides an in-depth understanding of the FDM47-06KC5, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.
Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von FDM47-06KC5 in technischen Lösungen auf
What is FDM47-06KC5?
- FDM47-06KC5 is a type of thermoplastic filament used in 3D printing, known for its high strength and heat resistance.
What are the key technical specifications of FDM47-06KC5?
- FDM47-06KC5 typically has a diameter of 1.75mm or 2.85mm, and it can withstand temperatures up to 100-120°C.
What are the common applications of FDM47-06KC5 in technical solutions?
- FDM47-06KC5 is commonly used in manufacturing functional prototypes, tooling, and end-use parts due to its durability and heat resistance.
How does FDM47-06KC5 compare to other 3D printing filaments?
- FDM47-06KC5 offers higher strength and better thermal properties compared to standard PLA or ABS filaments.
What are the recommended printing parameters for FDM47-06KC5?
- The recommended printing temperature for FDM47-06KC5 is around 240-260°C, with a heated bed temperature of 80-100°C.
Can FDM47-06KC5 be post-processed or machined after printing?
- Yes, FDM47-06KC5 can be easily post-processed using techniques such as sanding, drilling, or tapping to achieve the desired finish.
Is FDM47-06KC5 suitable for outdoor or high-temperature applications?
- Yes, FDM47-06KC5's heat resistance makes it suitable for outdoor use and applications requiring exposure to elevated temperatures.
What are the storage and handling considerations for FDM47-06KC5?
- FDM47-06KC5 should be stored in a cool, dry place away from direct sunlight, and it is important to handle it with clean, dry hands to avoid contamination.
Can FDM47-06KC5 be recycled?
- Yes, FDM47-06KC5 is recyclable and can be reprocessed into new filament or products.
Are there any safety considerations when working with FDM47-06KC5?
- It is important to ensure proper ventilation when 3D printing with FDM47-06KC5, as well as following manufacturer guidelines for safe handling and disposal of waste material.