Vishay Siliconix
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
2N4861JTX02

2N4861JTX02

Product Overview

Category

The 2N4861JTX02 belongs to the category of semiconductor devices.

Use

It is commonly used as a small-signal P-channel junction field-effect transistor (JFET) in electronic circuits.

Characteristics

  • Low noise figure
  • High input impedance
  • Low power consumption

Package

The 2N4861JTX02 is typically available in TO-92 packaging.

Essence

This device is essential for amplifying and switching electronic signals in various applications.

Packaging/Quantity

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Maximum Drain-Source Voltage: Vds = -40V
  • Maximum Gate-Source Voltage: Vgs = -40V
  • Maximum Continuous Drain Current: Id = -10mA
  • Power Dissipation: Pd = 350mW
  • Operating Temperature Range: -55°C to +150°C

Detailed Pin Configuration

The 2N4861JTX02 has three pins: 1. Source (S) 2. Gate (G) 3. Drain (D)

Functional Features

  • High input impedance allows for minimal loading of preceding stages.
  • Low noise figure makes it suitable for low-noise amplifier applications.
  • Good linearity and high gain characteristics.

Advantages

  • Low noise figure enhances signal fidelity.
  • High input impedance minimizes signal distortion.
  • Suitable for low-power applications due to low power consumption.

Disadvantages

  • Limited maximum drain-source voltage compared to other JFETs.
  • Relatively low maximum continuous drain current.

Working Principles

The 2N4861JTX02 operates based on the control of current flow between the source and drain terminals through the manipulation of the gate-source voltage.

Detailed Application Field Plans

  1. Audio Amplification: Utilized in audio preamplifiers and low-noise microphone amplifiers.
  2. Instrumentation: Used in measurement equipment due to its low noise characteristics.
  3. Radio Frequency (RF) Circuits: Employed in RF amplifiers and mixers for its high input impedance.

Detailed and Complete Alternative Models

  1. 2N5457: Similar small-signal JFET with comparable characteristics.
  2. J201: Alternative JFET commonly used in similar applications.

In conclusion, the 2N4861JTX02 is a versatile semiconductor device with specific advantages and limitations that make it suitable for various electronic applications, particularly those requiring low noise and high input impedance.

[Word Count: 346]

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von 2N4861JTX02 in technischen Lösungen auf

  1. What is the 2N4861JTX02 transistor used for?

    • The 2N4861JTX02 transistor is commonly used for switching and amplification in various electronic circuits.

  2. What are the key specifications of the 2N4861JTX02 transistor?

    • The 2N4861JTX02 transistor is a P-channel JFET with a maximum drain-source voltage of -40V and a maximum gate-source voltage of -40V.

  3. How do I connect the 2N4861JTX02 transistor in a circuit?

    • The 2N4861JTX02 transistor can be connected in common source or common drain configurations, depending on the specific application requirements.

  4. What are the typical applications of the 2N4861JTX02 transistor?

    • The 2N4861JTX02 transistor is commonly used in audio amplifiers, analog switches, and voltage-controlled resistors.

  5. What are the recommended operating conditions for the 2N4861JTX02 transistor?

    • The 2N4861JTX02 transistor should be operated within the specified temperature range of -55°C to 150°C and with appropriate biasing and signal levels.

  6. Can the 2N4861JTX02 transistor be used for high-frequency applications?

    • The 2N4861JTX02 transistor has limited frequency response and is typically not suitable for high-frequency applications.

  7. What are the important parameters to consider when designing with the 2N4861JTX02 transistor?

    • Key parameters to consider include transconductance, pinch-off voltage, and maximum power dissipation to ensure proper circuit performance.

  8. Are there any alternative transistors that can be used in place of the 2N4861JTX02?

    • Depending on the specific requirements, alternative P-channel JFETs such as the 2N5460 or 2N5486 may be suitable replacements for the 2N4861JTX02.

  9. How can I test the 2N4861JTX02 transistor to ensure it is functioning correctly?

    • Testing the 2N4861JTX02 transistor involves measuring its characteristics using a multimeter or semiconductor parameter analyzer to verify its performance.

  10. Where can I find detailed datasheets and application notes for the 2N4861JTX02 transistor?

    • Detailed datasheets and application notes for the 2N4861JTX02 transistor can be obtained from semiconductor manufacturers' websites or distributor resources.