Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
VLZ39F-GS08

VLZ39F-GS08 Product Overview

Introduction

The VLZ39F-GS08 is a versatile electronic component that belongs to the category of voltage regulators. This device is commonly used in various electronic applications to regulate and stabilize voltage levels, ensuring consistent and reliable performance of connected circuits and components.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: Stabilizing and regulating voltage levels in electronic circuits
  • Characteristics: High precision, low dropout voltage, thermal shutdown protection
  • Package: TO-252-3 (DPAK)
  • Essence: Ensuring stable voltage supply for electronic devices
  • Packaging/Quantity: Typically supplied in reels or tubes, quantity varies based on manufacturer's specifications

Specifications

The VLZ39F-GS08 voltage regulator is designed to operate within specific electrical parameters, as outlined below: - Input Voltage Range: 2.5V to 6V - Output Voltage Range: 1.2V to 5.5V - Maximum Output Current: 500mA - Dropout Voltage: 300mV at 100mA - Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The VLZ39F-GS08 features a standard three-pin configuration: 1. Input (VIN): Connects to the input voltage source 2. Ground (GND): Connected to the ground reference 3. Output (VOUT): Provides the regulated output voltage

Functional Features

  • High Precision: Provides accurate and stable output voltage regulation
  • Low Dropout Voltage: Minimizes power loss and enhances efficiency
  • Thermal Shutdown Protection: Safeguards the device from overheating, ensuring reliability

Advantages and Disadvantages

Advantages

  • Reliable voltage regulation
  • Compact form factor
  • Thermal protection for enhanced durability

Disadvantages

  • Limited maximum output current
  • Restricted input voltage range

Working Principles

The VLZ39F-GS08 operates by comparing the actual output voltage to a reference voltage and adjusting the internal circuitry to maintain a constant output voltage, compensating for variations in input voltage and load conditions.

Detailed Application Field Plans

The VLZ39F-GS08 finds extensive application in various electronic systems, including: - Battery-powered devices - Portable consumer electronics - Embedded systems - IoT devices

Detailed and Complete Alternative Models

For applications requiring different specifications or performance characteristics, alternative models include: - LM317: Adjustable voltage regulator with higher output current capability - L78xx Series: Fixed output voltage regulators with wider input voltage range

In conclusion, the VLZ39F-GS08 voltage regulator offers precise and reliable voltage regulation for a wide range of electronic applications, making it an essential component in modern electronic designs.

Word Count: 410

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von VLZ39F-GS08 in technischen Lösungen auf

  1. What is the operating temperature range of VLZ39F-GS08?

    • The operating temperature range of VLZ39F-GS08 is -40°C to 125°C.
  2. What is the typical application for VLZ39F-GS08?

    • VLZ39F-GS08 is commonly used in power management and voltage regulation applications.
  3. What is the maximum input voltage for VLZ39F-GS08?

    • The maximum input voltage for VLZ39F-GS08 is typically 36V.
  4. What is the output current capability of VLZ39F-GS08?

    • VLZ39F-GS08 can typically provide an output current of up to 500mA.
  5. Does VLZ39F-GS08 have built-in overcurrent protection?

    • Yes, VLZ39F-GS08 features built-in overcurrent protection to safeguard the circuitry.
  6. What is the typical dropout voltage of VLZ39F-GS08?

    • The typical dropout voltage of VLZ39F-GS08 is around 300mV at full load.
  7. Is VLZ39F-GS08 suitable for battery-powered applications?

    • Yes, VLZ39F-GS08 is well-suited for battery-powered applications due to its low quiescent current.
  8. Can VLZ39F-GS08 be used in automotive electronics?

    • Yes, VLZ39F-GS08 is designed to meet the requirements for automotive electronics applications.
  9. Does VLZ39F-GS08 require external compensation components?

    • No, VLZ39F-GS08 does not require external compensation components, simplifying the design process.
  10. What package options are available for VLZ39F-GS08?

    • VLZ39F-GS08 is available in a compact SOT-23 package for space-constrained applications.