Vishay Semiconductor Diodes Division
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
1N5232B-TAP
Im Detail sehen Datenblätter

1N5232B-TAP

Product Overview

Category:

The 1N5232B-TAP belongs to the category of semiconductor diodes.

Use:

It is commonly used as a voltage regulator in electronic circuits.

Characteristics:

  • Forward Voltage: 1.0V
  • Reverse Voltage: 6.8V
  • Power Dissipation: 500mW
  • Package Type: DO-35
  • Operating Temperature Range: -65°C to +200°C
  • Storage Temperature Range: -65°C to +200°C

Package:

The 1N5232B-TAP is typically available in a DO-35 package.

Essence:

This diode serves as a crucial component in stabilizing voltage levels within electronic devices and circuits.

Packaging/Quantity:

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Manufacturer: Multiple manufacturers
  • Part Number: 1N5232B-TAP
  • Type: Zener Diode
  • Voltage - Zener (Nom): 6.8V
  • Tolerance: ±5%
  • Power - Max: 500mW
  • Impedance (Max) (Zzt): 20 Ohm
  • Current - Reverse Leakage @ Vr: 100nA @ 5.1V
  • Voltage - Forward (Vf) (Max) @ If: 1V @ 200mA
  • Operating Temperature: -65°C ~ 200°C
  • Mounting Type: Through Hole
  • Package / Case: DO-204AH, DO-35, Axial
  • Supplier Device Package: DO-35
  • Other Names: 1N5232B-TAP-ND, 1N5232B-TAPGICT-ND

Detailed Pin Configuration

The 1N5232B-TAP has two pins, anode, and cathode. The anode is connected to the positive terminal, while the cathode is connected to the negative terminal.

Functional Features

The 1N5232B-TAP functions as a voltage regulator by maintaining a constant output voltage across its terminals, even when there are fluctuations in the input voltage.

Advantages and Disadvantages

Advantages

  • Precise voltage regulation
  • Compact size
  • Wide operating temperature range

Disadvantages

  • Limited power dissipation capability
  • Sensitivity to reverse voltage

Working Principles

When the voltage across the 1N5232B-TAP exceeds its specified zener voltage, it begins conducting in the reverse direction, effectively regulating the output voltage.

Detailed Application Field Plans

The 1N5232B-TAP is widely used in various applications such as: - Voltage regulators in power supplies - Overvoltage protection circuits - Signal clamping circuits - Voltage reference circuits

Detailed and Complete Alternative Models

Some alternative models to the 1N5232B-TAP include: - 1N5221B-TAP - 1N5222B-TAP - 1N5223B-TAP - 1N5224B-TAP - 1N5225B-TAP

In conclusion, the 1N5232B-TAP is a vital component in electronic circuits, providing precise voltage regulation and finding extensive use in various applications.

[Word Count: 498]

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von 1N5232B-TAP in technischen Lösungen auf

Sure, here are 10 common questions and answers related to the application of 1N5232B-TAP:

  1. What is the voltage rating of 1N5232B-TAP?

    • The voltage rating of 1N5232B-TAP is 5.1 volts.

  2. What is the maximum power dissipation of 1N5232B-TAP?

    • The maximum power dissipation of 1N5232B-TAP is 1.3 watts.

  3. What is the typical forward voltage drop of 1N5232B-TAP?

    • The typical forward voltage drop of 1N5232B-TAP is 0.9 volts at 200mA.

  4. What is the operating temperature range of 1N5232B-TAP?

    • The operating temperature range of 1N5232B-TAP is -65°C to +200°C.

  5. Is 1N5232B-TAP suitable for voltage regulation applications?

    • Yes, 1N5232B-TAP is commonly used in voltage regulation applications due to its stable voltage reference characteristics.

  6. Can 1N5232B-TAP be used in reverse polarity protection circuits?

    • Yes, 1N5232B-TAP can be used in reverse polarity protection circuits due to its low reverse leakage current.

  7. What is the typical dynamic impedance of 1N5232B-TAP?

    • The typical dynamic impedance of 1N5232B-TAP is 20 ohms.

  8. Does 1N5232B-TAP require a heat sink for certain applications?

    • For high power dissipation applications, it is recommended to use a heat sink with 1N5232B-TAP to maintain proper thermal management.

  9. Is 1N5232B-TAP RoHS compliant?

    • Yes, 1N5232B-TAP is RoHS compliant, making it suitable for environmentally conscious designs.

  10. What are some common applications of 1N5232B-TAP?

    • Common applications of 1N5232B-TAP include voltage regulation, voltage reference, overvoltage protection, and precision analog circuits.