Vishay BC Components
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
NTCLE100E3502GB0
Im Detail sehen Datenblätter

NTCLE100E3502GB0

Introduction

The NTCLE100E3502GB0 is a thermistor belonging to the category of temperature sensors. This device is widely used in various applications due to its unique characteristics and reliable performance. In this entry, we will provide an overview of the basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models of the NTCLE100E3502GB0.

Basic Information Overview

  • Category: Temperature Sensor
  • Use: Measurement and control of temperature in electronic devices and systems
  • Characteristics: High sensitivity to temperature changes, small size, and low cost
  • Package: Radial leaded, epoxy coated
  • Essence: Accurate temperature measurement and control
  • Packaging/Quantity: Available in bulk packaging with varying quantities

Specifications

  • Resistance at 25°C: 35 kΩ
  • Tolerance: ±2%
  • Operating Temperature Range: -55°C to 150°C
  • Thermal Time Constant: 7 seconds (in still air)
  • Maximum Power Dissipation: 200 mW

Detailed Pin Configuration

The NTCLE100E3502GB0 has a radial leaded package with two leads. The pin configuration is as follows: - Pin 1: Connected to one end of the thermistor element - Pin 2: Connected to the other end of the thermistor element

Functional Features

  • High sensitivity to temperature changes
  • Fast response time
  • Wide operating temperature range
  • Reliable and stable performance

Advantages and Disadvantages

Advantages

  • Small size allows for easy integration into compact designs
  • Low cost compared to other temperature sensing technologies
  • High sensitivity enables precise temperature measurements

Disadvantages

  • Non-linear response to temperature changes
  • Requires calibration for accurate temperature readings in specific applications

Working Principles

The NTCLE100E3502GB0 operates based on the principle of negative temperature coefficient (NTC) thermistors. As the temperature changes, the resistance of the thermistor varies inversely. This change in resistance is used to measure the temperature in the surrounding environment.

Detailed Application Field Plans

The NTCLE100E3502GB0 finds extensive use in various applications, including: - Temperature monitoring and control in consumer electronics - Thermal management in automotive systems - Industrial process control and monitoring - Medical devices for temperature sensing

Detailed and Complete Alternative Models

  • NTCLE100E3103JB0: Similar characteristics with a different resistance value
  • NTCLE100E3473JB0: Higher resistance variant for specific applications
  • NTCLE100E3223JB0: Lower resistance variant suitable for different temperature ranges

In conclusion, the NTCLE100E3502GB0 thermistor offers reliable temperature sensing capabilities with its unique characteristics and wide range of applications. Its compact size, cost-effectiveness, and high sensitivity make it a preferred choice for temperature measurement and control in diverse electronic systems.

Word count: 443

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von NTCLE100E3502GB0 in technischen Lösungen auf

  1. What is the NTCLE100E3502GB0 used for?

    • The NTCLE100E3502GB0 is a thermistor commonly used for temperature sensing and control in various technical solutions.

  2. What is the operating temperature range of NTCLE100E3502GB0?

    • The operating temperature range of NTCLE100E3502GB0 is typically -50°C to 150°C.

  3. How does NTCLE100E3502GB0 work as a temperature sensor?

    • NTCLE100E3502GB0 operates based on the principle of resistance change with temperature, providing an analog output that varies with temperature.

  4. What are the typical applications of NTCLE100E3502GB0?

    • Common applications include temperature monitoring and control in industrial equipment, consumer electronics, automotive systems, and HVAC systems.

  5. What is the accuracy of NTCLE100E3502GB0?

    • The accuracy of NTCLE100E3502GB0 can vary, but it is typically within a few degrees Celsius over its operating range.

  6. How should NTCLE100E3502GB0 be connected in a circuit?

    • NTCLE100E3502GB0 should be connected in series with a resistor in a voltage divider configuration to produce a voltage output proportional to temperature.

  7. Can NTCLE100E3502GB0 be used for temperature compensation in electronic circuits?

    • Yes, NTCLE100E3502GB0 is often used for temperature compensation in electronic circuits due to its predictable resistance-temperature characteristics.

  8. What are the key considerations when designing with NTCLE100E3502GB0?

    • Designers should consider factors such as self-heating effects, response time, and environmental conditions to ensure accurate and reliable temperature measurements.

  9. Is NTCLE100E3502GB0 suitable for harsh environments?

    • NTCLE100E3502GB0 can be selected with appropriate encapsulation and materials to make it suitable for use in harsh environments, such as high humidity or chemical exposure.

  10. Are there any specific soldering or handling requirements for NTCLE100E3502GB0?

    • Care should be taken to avoid excessive mechanical stress or rapid temperature changes during soldering to prevent damage to the thermistor. Additionally, proper ESD precautions should be observed during handling.