Torex Semiconductor Ltd
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
XC6124C446MR-G
Im Detail sehen Datenblätter

XC6124C446MR-G

Product Overview

Category

XC6124C446MR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage regulation
  • Stabilization of voltage levels
  • Compact size
  • Low power consumption

Package

XC6124C446MR-G comes in a small surface-mount package.

Essence

The essence of XC6124C446MR-G is to provide a stable and regulated voltage output for electronic devices.

Packaging/Quantity

XC6124C446MR-G is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 4.46V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124C446MR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Low dropout voltage
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages

  • Small size allows for space-saving designs
  • Low power consumption increases overall efficiency
  • Provides stable voltage output even under varying input conditions
  • Offers protection against overcurrent, thermal shutdown, and short-circuits

Disadvantages

  • Limited output current capacity (150mA)
  • Restricted input voltage range (2.5V - 6.0V)

Working Principles

XC6124C446MR-G operates by regulating the input voltage to provide a stable output voltage. It utilizes internal circuitry to monitor and adjust the voltage levels, ensuring a consistent output even when the input voltage fluctuates.

Detailed Application Field Plans

XC6124C446MR-G finds applications in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable electronics - IoT (Internet of Things) devices - Wearable technology - Embedded systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124C446MR-G are: - XC6206P446MR-G - XC6220C446MR-G - XC6219C446MR-G - XC6209C446MR-G

These models offer similar voltage regulation capabilities and may vary in terms of input/output voltage ranges, current capacity, and package sizes.

Word count: 346 words

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von XC6124C446MR-G in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of XC6124C446MR-G in technical solutions:

  1. Q: What is XC6124C446MR-G? A: XC6124C446MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of XC6124C446MR-G? A: The operating voltage range of XC6124C446MR-G is typically between 0.8V and 6.0V.

  3. Q: How does XC6124C446MR-G work? A: XC6124C446MR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below or exceeds a certain threshold, it triggers an output signal to indicate the voltage status.

  4. Q: What is the output type of XC6124C446MR-G? A: XC6124C446MR-G has an open-drain output type, which means it can sink current but cannot source current.

  5. Q: Can XC6124C446MR-G be used for undervoltage and overvoltage detection? A: Yes, XC6124C446MR-G can be used for both undervoltage and overvoltage detection, depending on how it is configured.

  6. Q: What is the typical quiescent current consumption of XC6124C446MR-G? A: The typical quiescent current consumption of XC6124C446MR-G is very low, usually around 1.0µA.

  7. Q: Is XC6124C446MR-G suitable for battery-powered applications? A: Yes, XC6124C446MR-G is suitable for battery-powered applications due to its low quiescent current consumption and wide operating voltage range.

  8. Q: Can XC6124C446MR-G be used in automotive applications? A: Yes, XC6124C446MR-G is AEC-Q100 qualified, making it suitable for automotive applications that require high reliability and performance.

  9. Q: Does XC6124C446MR-G have built-in hysteresis? A: Yes, XC6124C446MR-G has built-in hysteresis, which helps prevent output oscillation near the threshold voltage.

  10. Q: What package does XC6124C446MR-G come in? A: XC6124C446MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained designs.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.