Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
XC6124A737MR-G

XC6124A737MR-G

Product Overview

Category

XC6124A737MR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.

Characteristics

  • Voltage regulation: XC6124A737MR-G provides a stable output voltage.
  • Low dropout voltage: It operates efficiently even when the input voltage is close to the desired output voltage.
  • Low quiescent current: The regulator consumes minimal current when there is no load.
  • Thermal shutdown protection: It automatically shuts down to prevent damage from excessive heat.

Package

XC6124A737MR-G comes in a small surface-mount package, making it suitable for compact electronic devices.

Essence

The essence of XC6124A737MR-G lies in its ability to maintain a constant voltage level, ensuring reliable operation of electronic circuits.

Packaging/Quantity

XC6124A737MR-G is typically packaged in reels or tape and reel packaging. The quantity per reel varies depending on the manufacturer.

Specifications

  • Input voltage range: 2.5V - 6.0V
  • Output voltage: 3.3V
  • Maximum output current: 150mA
  • Dropout voltage: 200mV (at 100mA)
  • Quiescent current: 30µA (typical)
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

XC6124A737MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: XC6124A737MR-G maintains a stable output voltage regardless of variations in the input voltage.
  • Low dropout voltage: It can operate efficiently even when the input voltage is only slightly higher than the desired output voltage.
  • Thermal shutdown protection: The regulator automatically shuts down if the temperature exceeds a safe threshold, preventing damage to the device.

Advantages and Disadvantages

Advantages

  • Provides stable output voltage
  • Low dropout voltage ensures efficient operation
  • Low quiescent current minimizes power consumption
  • Thermal shutdown protection prevents overheating

Disadvantages

  • Limited maximum output current (150mA)
  • Input voltage range is restricted to 2.5V - 6.0V

Working Principles

XC6124A737MR-G utilizes internal circuitry to regulate the output voltage. It compares the reference voltage with the feedback voltage and adjusts the pass transistor accordingly to maintain a constant output voltage. The low dropout voltage allows it to operate efficiently even when the input voltage is close to the desired output voltage.

Detailed Application Field Plans

XC6124A737MR-G finds applications in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Embedded systems - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124A737MR-G are: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 411

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von XC6124A737MR-G in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of XC6124A737MR-G in technical solutions:

  1. Question: What is XC6124A737MR-G?
    - Answer: XC6124A737MR-G is a specific model of voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used in various technical solutions.

  2. Question: What is the purpose of XC6124A737MR-G?
    - Answer: The purpose of XC6124A737MR-G is to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.

  3. Question: What is the operating voltage range of XC6124A737MR-G?
    - Answer: XC6124A737MR-G operates within a voltage range of 0.8V to 6.0V.

  4. Question: How does XC6124A737MR-G detect voltage levels?
    - Answer: XC6124A737MR-G uses a built-in voltage reference and comparator to compare the input voltage with a preset threshold. When the input voltage drops below the threshold, it triggers an output signal.

  5. Question: Can XC6124A737MR-G be used in battery-powered applications?
    - Answer: Yes, XC6124A737MR-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.

  6. Question: What is the output type of XC6124A737MR-G?
    - Answer: XC6124A737MR-G provides an open-drain output, which means it can be connected to other devices or microcontrollers for further processing.

  7. Question: What is the typical accuracy of XC6124A737MR-G?
    - Answer: The typical accuracy of XC6124A737MR-G is ±1.5%.

  8. Question: Can XC6124A737MR-G be used in automotive applications?
    - Answer: Yes, XC6124A737MR-G is AEC-Q100 qualified and can be used in automotive applications where voltage monitoring is required.

  9. Question: Does XC6124A737MR-G have any built-in protection features?
    - Answer: Yes, XC6124A737MR-G has built-in overvoltage protection, which prevents damage to the IC in case of voltage spikes or transients.

  10. Question: What is the package type of XC6124A737MR-G?
    - Answer: XC6124A737MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained designs.

Please note that these answers are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.