Torex Semiconductor Ltd
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
XC6124A528MR-G
Im Detail sehen Datenblätter

XC6124A528MR-G

Product Overview

Category

XC6124A528MR-G belongs to the category of voltage regulators.

Use

This product is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • Wide input voltage range
  • High efficiency

Package

XC6124A528MR-G is available in a small surface-mount package.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

XC6124A528MR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.8V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Low dropout voltage
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages

  • Small form factor
  • Wide input voltage range
  • Low power consumption
  • Stable and regulated output voltage

Disadvantages

  • Limited output current capacity
  • Higher cost compared to some alternatives

Working Principles

XC6124A528MR-G operates by comparing the output voltage with a reference voltage. It adjusts the internal circuitry to maintain a constant output voltage, even when the input voltage or load conditions change.

Detailed Application Field Plans

XC6124A528MR-G finds applications in various electronic devices, including: - Mobile phones - Portable media players - Digital cameras - Wireless communication devices - Wearable devices

Detailed and Complete Alternative Models

  1. XC6206P332MR-G: Similar voltage regulator with a different output voltage (3.3V).
  2. XC6210B182MR-G: Voltage regulator with a lower dropout voltage and higher output current capacity.
  3. XC6220C502MR-G: Voltage regulator with a higher output voltage (5.0V) and wider input voltage range.

These alternative models provide flexibility to suit different application requirements.

Word count: 322

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von XC6124A528MR-G in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of XC6124A528MR-G in technical solutions:

  1. Question: What is XC6124A528MR-G?
    - Answer: XC6124A528MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used to monitor the voltage level in electronic circuits.

  2. Question: What is the operating voltage range of XC6124A528MR-G?
    - Answer: The operating voltage range of XC6124A528MR-G is from 0.8V to 6.0V.

  3. Question: How does XC6124A528MR-G work?
    - Answer: XC6124A528MR-G continuously monitors the input voltage and compares it with a fixed reference voltage. When the input voltage falls below or rises above the reference voltage, an output signal is triggered.

  4. Question: What is the output type of XC6124A528MR-G?
    - Answer: XC6124A528MR-G has an open-drain output type, which means it can sink current but cannot source current.

  5. Question: What is the quiescent current consumption of XC6124A528MR-G?
    - Answer: The quiescent current consumption of XC6124A528MR-G is typically 1.0µA.

  6. Question: Can XC6124A528MR-G be used for overvoltage protection?
    - Answer: No, XC6124A528MR-G is primarily designed for undervoltage detection. It does not provide overvoltage protection.

  7. Question: What is the typical response time of XC6124A528MR-G?
    - Answer: The typical response time of XC6124A528MR-G is 200µs.

  8. Question: Can XC6124A528MR-G be used in battery-powered applications?
    - Answer: Yes, XC6124A528MR-G is suitable for battery-powered applications due to its low quiescent current consumption.

  9. Question: Does XC6124A528MR-G have built-in hysteresis?
    - Answer: Yes, XC6124A528MR-G has a built-in hysteresis of typically 50mV, which helps prevent oscillation near the threshold voltage.

  10. Question: What is the package type of XC6124A528MR-G?
    - Answer: XC6124A528MR-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.