XC6122F516MR-G

Product Overview

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

Package: The XC6122F516MR-G comes in a small form factor package.
Essence: It is a low dropout voltage regulator.
Packaging/Quantity: The product is typically packaged in reels and available in large quantities.

Specifications

The specifications of XC6122F516MR-G are as follows:

Input Voltage Range: 2.5V - 6.0V
Output Voltage Range: 1.2V - 5.5V
Maximum Output Current: 150mA
Dropout Voltage: 200mV (typical)
Quiescent Current: 30µA (typical)
Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The pin configuration of XC6122F516MR-G is as follows:

VIN: Input voltage pin
GND: Ground pin
VOUT: Output voltage pin
CE: Chip enable pin

Functional Features

Low dropout voltage: The XC6122F516MR-G has a low dropout voltage, allowing it to regulate voltage efficiently even when the input voltage is close to the desired output voltage.
Low quiescent current: The regulator consumes very little current when not delivering power, resulting in improved energy efficiency.
Overcurrent protection: The device incorporates overcurrent protection to safeguard against excessive current flow.

Advantages and Disadvantages

Advantages: - Small form factor package allows for space-saving designs. - Wide input voltage range provides flexibility in various applications. - Low dropout voltage ensures efficient regulation. - Low quiescent current improves energy efficiency.

Disadvantages: - Limited maximum output current may not be suitable for high-power applications. - Operating temperature range may restrict usage in extreme environments.

Working Principles

The XC6122F516MR-G is a linear voltage regulator that operates by comparing the output voltage to a reference voltage. It adjusts the resistance between the input and output to maintain a stable output voltage, regardless of changes in the input voltage or load conditions.

Detailed Application Field Plans

XC6122F516MR-G finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices

Detailed and Complete Alternative Models

Some alternative models to XC6122F516MR-G are: - XC6206P332MR: 3.3V output voltage, 200mA maximum output current - XC6219B332MR: 3.3V output voltage, 500mA maximum output current - XC6220C332MR: 3.3V output voltage, 1A maximum output current

These alternative models offer different output voltages and maximum output currents to cater to specific application requirements.

Word count: 315 words

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von XC6122F516MR-G in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of XC6122F516MR-G in technical solutions:

Q: What is XC6122F516MR-G? A: XC6122F516MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.
Q: What is the operating voltage range of XC6122F516MR-G? A: The operating voltage range of XC6122F516MR-G is typically between 0.8V and 6.0V.
Q: How does XC6122F516MR-G work? A: XC6122F516MR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below or exceeds a certain threshold, it triggers an output signal.
Q: What is the output type of XC6122F516MR-G? A: XC6122F516MR-G has an open-drain output type, which means it can sink current but cannot source current.
Q: What is the typical quiescent current consumption of XC6122F516MR-G? A: The typical quiescent current consumption of XC6122F516MR-G is very low, usually around 1.0µA.
Q: Can XC6122F516MR-G be used for overvoltage protection? A: No, XC6122F516MR-G is primarily designed for undervoltage detection. It does not provide overvoltage protection functionality.
Q: What is the typical accuracy of the voltage detection threshold in XC6122F516MR-G? A: The typical accuracy of the voltage detection threshold in XC6122F516MR-G is ±1.5%.
Q: Can XC6122F516MR-G be used in battery-powered applications? A: Yes, XC6122F516MR-G can be used in battery-powered applications as it has a low quiescent current and wide operating voltage range.
Q: Does XC6122F516MR-G have built-in hysteresis? A: Yes, XC6122F516MR-G has built-in hysteresis to prevent output oscillation near the detection threshold.
Q: What is the package type of XC6122F516MR-G? A: XC6122F516MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained applications.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.