Torex Semiconductor Ltd
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
XC6122E436MR-G
Im Detail sehen Datenblätter

XC6122E436MR-G

Product Overview

Category

XC6122E436MR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • Low power consumption
  • High precision
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6122E436MR-G comes in a small surface-mount package.

Essence

The essence of XC6122E436MR-G is its ability to regulate voltage efficiently and reliably in various electronic applications.

Packaging/Quantity

The product is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Output Current: 100mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 1μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122E436MR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6122E436MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: The device automatically shuts down when the output current exceeds the specified limit, protecting the circuit from damage.
  • Thermal shutdown protection: In case of excessive temperature, the regulator enters a thermal shutdown mode to prevent overheating.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • Low power consumption helps conserve energy.
  • High precision ensures accurate voltage regulation.
  • Wide input voltage range provides flexibility in various applications.
  • Overcurrent and thermal shutdown protection enhance circuit safety.

Disadvantages

  • Limited output current capacity may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

XC6122E436MR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, compensating for any variations in the input voltage or load conditions.

Detailed Application Field Plans

XC6122E436MR-G finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices - Industrial automation systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122E436MR-G are: - XC6122 series: Various models with different output voltages and current ratings. - LM1117: A popular linear voltage regulator with similar specifications. - AP2112: Another voltage regulator with comparable features.

These alternative models offer similar functionality and can be used depending on specific requirements and availability.

Word count: 334 words

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von XC6122E436MR-G in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of XC6122E436MR-G in technical solutions:

  1. Q: What is XC6122E436MR-G? A: XC6122E436MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of XC6122E436MR-G? A: The operating voltage range of XC6122E436MR-G is from 0.6V to 6.0V.

  3. Q: What is the output type of XC6122E436MR-G? A: XC6122E436MR-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve different logic levels.

  4. Q: What is the typical quiescent current consumption of XC6122E436MR-G? A: The typical quiescent current consumption of XC6122E436MR-G is very low, typically around 1.0µA.

  5. Q: Can XC6122E436MR-G be used for undervoltage detection? A: Yes, XC6122E436MR-G can be used for undervoltage detection. It has a built-in voltage reference and comparator that can detect when the input voltage drops below a certain threshold.

  6. Q: What is the accuracy of the voltage detection in XC6122E436MR-G? A: The accuracy of voltage detection in XC6122E436MR-G is typically ±2%.

  7. Q: What is the hysteresis voltage of XC6122E436MR-G? A: The hysteresis voltage of XC6122E436MR-G is typically 0.1V, which helps to prevent oscillation and ensure stable detection.

  8. Q: Can XC6122E436MR-G be used in battery-powered applications? A: Yes, XC6122E436MR-G can be used in battery-powered applications due to its low quiescent current consumption, which helps to conserve battery life.

  9. Q: Does XC6122E436MR-G have any built-in protection features? A: Yes, XC6122E436MR-G has built-in overcurrent protection and thermal shutdown features to protect the IC from damage under abnormal conditions.

  10. Q: What is the package type of XC6122E436MR-G? A: XC6122E436MR-G is available in a small SOT-23-5 package, which is commonly used for surface-mount applications.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.