Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
XC6120C402HR-G

XC6120C402HR-G

Product Overview

Category

XC6120C402HR-G belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact size
  • High efficiency
  • Low power consumption

Package

XC6120C402HR-G is available in a small form factor package, which makes it suitable for space-constrained applications.

Essence

The essence of XC6120C402HR-G lies in its ability to regulate voltage and manage power efficiently, ensuring stable operation of electronic devices.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.5V
  • Maximum Output Current: 200mA
  • Dropout Voltage: 150mV @ 100mA
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The XC6120C402HR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: The XC6120C402HR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices.
  • Thermal shutdown: In case of excessive temperature, the device automatically shuts down to prevent damage.
  • Low quiescent current: The low quiescent current minimizes power consumption when the device is in standby mode.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into various electronic devices.
  • High efficiency results in minimal power loss during voltage regulation.
  • Wide input and output voltage ranges provide flexibility in different applications.
  • Overcurrent protection ensures the safety of connected devices.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the device.

Working Principles

The XC6120C402HR-G utilizes a combination of internal circuitry, feedback mechanisms, and control logic to regulate the output voltage. It continuously monitors the input voltage and adjusts the internal circuitry to maintain a stable output voltage within the specified range.

Detailed Application Field Plans

XC6120C402HR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6120C402HR-G are: - XC6206P332MR-G - XC6220B332MR-G - XC6219B332MR-G - XC6220C332MR-G - XC6220D332MR-G

These models have comparable specifications and can be considered as alternatives based on specific application requirements.

Word count: 411 words

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von XC6120C402HR-G in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of XC6120C402HR-G in technical solutions:

  1. Q: What is XC6120C402HR-G? A: XC6120C402HR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of XC6120C402HR-G? A: The operating voltage range of XC6120C402HR-G is typically between 0.8V and 6.0V.

  3. Q: How does XC6120C402HR-G work? A: XC6120C402HR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below or exceeds a certain threshold, it triggers an output signal to indicate the status of the power supply.

  4. Q: What is the output type of XC6120C402HR-G? A: XC6120C402HR-G has an open-drain output type, which means it can sink current when the output is active.

  5. Q: Can XC6120C402HR-G be used in battery-powered applications? A: Yes, XC6120C402HR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  6. Q: Is XC6120C402HR-G suitable for automotive applications? A: Yes, XC6120C402HR-G is suitable for automotive applications as it meets the AEC-Q100 automotive reliability standards.

  7. Q: What is the accuracy of the voltage detection threshold in XC6120C402HR-G? A: The voltage detection threshold accuracy of XC6120C402HR-G is typically ±1.5%.

  8. Q: Can XC6120C402HR-G be used for overvoltage protection? A: No, XC6120C402HR-G is primarily designed for undervoltage detection and does not provide overvoltage protection.

  9. Q: What is the temperature range of XC6120C402HR-G? A: XC6120C402HR-G has an operating temperature range of -40°C to +85°C.

  10. Q: How can XC6120C402HR-G be connected in a circuit? A: XC6120C402HR-G requires a few external components such as resistors and capacitors to set the voltage detection threshold and stabilize the operation. The datasheet provides detailed application circuit examples.

Please note that the answers provided here are general and may vary depending on specific design considerations and requirements. It is always recommended to refer to the datasheet and consult with technical experts for accurate information and guidance.