Torex Semiconductor Ltd
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
XC6118C32DGR-G
Im Detail sehen Datenblätter

XC6118C32DGR-G

Product Overview

Category

XC6118C32DGR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.

Characteristics

  • Voltage regulation: XC6118C32DGR-G provides a stable output voltage.
  • Low dropout voltage: It operates efficiently even when the input voltage is close to the output voltage.
  • Low quiescent current: The regulator consumes minimal current when no load is connected.
  • Thermal shutdown protection: It automatically shuts down to prevent damage from excessive heat.

Package

XC6118C32DGR-G is available in a small surface-mount package.

Essence

The essence of XC6118C32DGR-G lies in its ability to provide reliable and stable voltage regulation for electronic devices.

Packaging/Quantity

The product is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input voltage range: 2.5V - 6.0V
  • Output voltage: 3.2V
  • Maximum output current: 150mA
  • Dropout voltage: 200mV (at 100mA)
  • Quiescent current: 30µA (typical)
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

XC6118C32DGR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: XC6118C32DGR-G maintains a constant output voltage regardless of changes in input voltage or load conditions.
  • Low dropout voltage: It can operate with a very small voltage difference between the input and output.
  • Thermal shutdown protection: The regulator automatically shuts down if the temperature exceeds a certain threshold, preventing damage to the device.

Advantages and Disadvantages

Advantages

  • Stable output voltage ensures reliable performance of connected components.
  • Low dropout voltage allows efficient operation even with low input voltages.
  • Thermal shutdown protection prevents overheating and damage.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Narrow input voltage range restricts its compatibility with certain systems.

Working Principles

XC6118C32DGR-G utilizes a feedback mechanism to regulate the output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output. This feedback loop ensures stability and accuracy in voltage regulation.

Detailed Application Field Plans

XC6118C32DGR-G finds application in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wireless communication modules

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6118C32DGR-G are: - LM1117-3.3 - MCP1700-3302E/TO - TS2937CP-3.3

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 411 words

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von XC6118C32DGR-G in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of XC6118C32DGR-G in technical solutions:

  1. Q: What is XC6118C32DGR-G? A: XC6118C32DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6118C32DGR-G? A: The operating voltage range of XC6118C32DGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6118C32DGR-G help in technical solutions? A: XC6118C32DGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a specified level.

  4. Q: What is the typical reset voltage threshold of XC6118C32DGR-G? A: The typical reset voltage threshold of XC6118C32DGR-G is 3.2V.

  5. Q: Can XC6118C32DGR-G be used in battery-powered applications? A: Yes, XC6118C32DGR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.

  6. Q: Does XC6118C32DGR-G have any built-in delay for the reset signal? A: Yes, XC6118C32DGR-G has a built-in delay of approximately 200ms to ensure stable power supply before releasing the reset signal.

  7. Q: Is XC6118C32DGR-G available in different package options? A: Yes, XC6118C32DGR-G is available in various package options, such as SOT-25 and USP-4.

  8. Q: Can XC6118C32DGR-G be used in automotive applications? A: Yes, XC6118C32DGR-G is suitable for automotive applications as it meets the necessary quality and reliability standards.

  9. Q: What is the maximum supply current of XC6118C32DGR-G? A: The maximum supply current of XC6118C32DGR-G is typically 1.0µA.

  10. Q: Are there any additional features or protections provided by XC6118C32DGR-G? A: Yes, XC6118C32DGR-G includes features like hysteresis, reverse voltage protection, and a power-on reset function to enhance its performance and protect against voltage fluctuations.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6118C32DGR-G.