Torex Semiconductor Ltd
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
XC6108N50DGR-G
Im Detail sehen Datenblätter

XC6108N50DGR-G

Product Overview

Category

XC6108N50DGR-G belongs to the category of voltage regulators.

Use

It is commonly used to regulate and stabilize voltage in electronic circuits.

Characteristics

  • Voltage regulation
  • Stabilization
  • High efficiency
  • Low power consumption

Package

XC6108N50DGR-G is available in a small surface-mount package.

Essence

The essence of XC6108N50DGR-G lies in its ability to provide stable voltage output for various electronic devices.

Packaging/Quantity

XC6108N50DGR-G is typically packaged in reels and comes in quantities of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 5.0V ± 2%
  • Maximum Output Current: 100mA
  • Dropout Voltage: 200mV (at 100mA)
  • Quiescent Current: 40µA (typical)

Detailed Pin Configuration

XC6108N50DGR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: XC6108N50DGR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices.
  • Thermal shutdown: The device includes thermal shutdown protection to prevent overheating.

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption.
  • Small form factor allows for easy integration into compact designs.
  • Reliable voltage regulation ensures optimal performance of connected devices.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

XC6108N50DGR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, compensating for input voltage variations.

Detailed Application Field Plans

XC6108N50DGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108N50DGR-G include: - LM317T - LT1084CP-5 - ADP3339AKCZ-5

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 320 words

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von XC6108N50DGR-G in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of XC6108N50DGR-G in technical solutions:

  1. Q: What is XC6108N50DGR-G? A: XC6108N50DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when it falls below a certain threshold.

  2. Q: What is the operating voltage range of XC6108N50DGR-G? A: The operating voltage range of XC6108N50DGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6108N50DGR-G help in technical solutions? A: XC6108N50DGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital devices when the power supply voltage drops below a specified level.

  4. Q: What is the typical reset voltage threshold of XC6108N50DGR-G? A: The typical reset voltage threshold of XC6108N50DGR-G is 5.0V.

  5. Q: Can XC6108N50DGR-G be used in battery-powered applications? A: Yes, XC6108N50DGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  6. Q: Does XC6108N50DGR-G have any built-in delay for the reset signal? A: Yes, XC6108N50DGR-G has a built-in delay of typically 200ms to ensure stable power supply before releasing the reset signal.

  7. Q: Is XC6108N50DGR-G suitable for automotive applications? A: Yes, XC6108N50DGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  8. Q: Can XC6108N50DGR-G be used in industrial control systems? A: Yes, XC6108N50DGR-G can be used in industrial control systems as it operates reliably in a wide temperature range of -40°C to +105°C.

  9. Q: Does XC6108N50DGR-G have any built-in protection features? A: Yes, XC6108N50DGR-G has built-in protection features such as overcurrent protection and thermal shutdown to ensure safe operation.

  10. Q: What package does XC6108N50DGR-G come in? A: XC6108N50DGR-G comes in a small SOT-25 package, which is compact and suitable for space-constrained applications.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6108N50DGR-G.