Torex Semiconductor Ltd
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
XC6108N10DGR-G
Im Detail sehen Datenblätter

XC6108N10DGR-G

Product Overview

Category

XC6108N10DGR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage regulation
  • Stabilization of voltage levels
  • Compact size
  • Low power consumption

Package

XC6108N10DGR-G is available in a small surface-mount package.

Essence

The essence of XC6108N10DGR-G is to provide a stable and regulated voltage output for electronic devices.

Packaging/Quantity

XC6108N10DGR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.0V
  • Output Current: 100mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108N10DGR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6108N10DGR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to prevent damage to connected devices.
  • Thermal shutdown: In case of excessive temperature, the regulator shuts down to avoid overheating.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into various electronic devices.
  • Low power consumption helps conserve energy.
  • Stable voltage output ensures reliable performance of connected devices.

Disadvantages

  • Limited output current capacity may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

XC6108N10DGR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for input voltage variations.

Detailed Application Field Plans

XC6108N10DGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108N10DGR-G are: - LM1117-1.0 - MCP1700-100 - LP2985-1.0 - TPS79301

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 346 words

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von XC6108N10DGR-G in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of XC6108N10DGR-G in technical solutions:

  1. Q: What is XC6108N10DGR-G? A: XC6108N10DGR-G is a voltage detector IC (integrated circuit) used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of XC6108N10DGR-G? A: The operating voltage range of XC6108N10DGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6108N10DGR-G work? A: XC6108N10DGR-G monitors the input voltage and provides a reset signal when the voltage drops below a certain threshold, ensuring proper operation of the device.

  4. Q: What is the typical current consumption of XC6108N10DGR-G? A: The typical current consumption of XC6108N10DGR-G is very low, usually around 1.5µA.

  5. Q: Can XC6108N10DGR-G be used in battery-powered applications? A: Yes, XC6108N10DGR-G is suitable for battery-powered applications due to its low current consumption.

  6. Q: What is the output type of XC6108N10DGR-G? A: XC6108N10DGR-G has an open-drain output, which allows it to be easily connected to other devices.

  7. Q: What is the reset delay time of XC6108N10DGR-G? A: The reset delay time of XC6108N10DGR-G is typically 200ms, providing sufficient time for the power supply to stabilize.

  8. Q: Can XC6108N10DGR-G be used in automotive applications? A: Yes, XC6108N10DGR-G is suitable for automotive applications as it can withstand high temperatures and has a wide operating voltage range.

  9. Q: Does XC6108N10DGR-G have built-in overvoltage protection? A: No, XC6108N10DGR-G does not have built-in overvoltage protection. Additional circuitry may be required to protect against overvoltage conditions.

  10. Q: What is the package type of XC6108N10DGR-G? A: XC6108N10DGR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained applications.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.