Torex Semiconductor Ltd
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
XC6108C46DGR-G
Im Detail sehen Datenblätter

XC6108C46DGR-G

Product Overview

Category

XC6108C46DGR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.

Characteristics

  • Voltage regulation capability
  • Low dropout voltage
  • High output current
  • Thermal shutdown protection
  • Short-circuit protection

Package

XC6108C46DGR-G is available in a small form factor package, typically SOT-23.

Essence

The essence of XC6108C46DGR-G lies in its ability to provide stable and regulated voltage to ensure proper functioning of electronic devices.

Packaging/Quantity

It is usually packaged in reels or tubes, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 4.6V
  • Output Current: Up to 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 50µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108C46DGR-G has three pins:

  1. VIN (Input Voltage): This pin is connected to the input voltage source.
  2. VOUT (Output Voltage): This pin provides the regulated output voltage.
  3. GND (Ground): This pin is connected to the ground reference.

Functional Features

  • Voltage Regulation: XC6108C46DGR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Low Dropout Voltage: It operates efficiently even when the input voltage is close to the output voltage.
  • Thermal Shutdown Protection: The device automatically shuts down if the temperature exceeds a certain threshold, preventing damage.
  • Short-Circuit Protection: It safeguards the circuit by limiting the current in case of a short circuit.

Advantages and Disadvantages

Advantages

  • High output current capability
  • Low dropout voltage ensures efficient operation
  • Thermal shutdown and short-circuit protection enhance reliability
  • Small form factor package allows for space-saving designs

Disadvantages

  • Limited output voltage options
  • Relatively low input voltage range

Working Principles

XC6108C46DGR-G utilizes a combination of internal circuitry, such as voltage references, error amplifiers, and pass transistors, to regulate the output voltage. It compares the feedback voltage with a reference voltage and adjusts the pass transistor accordingly to maintain a stable output voltage.

Detailed Application Field Plans

XC6108C46DGR-G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108C46DGR-G are: - LM1117-4.6 - MCP1700-4.6 - LP2985-4.6 - TPS73601DBVR

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 411 words

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von XC6108C46DGR-G in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of XC6108C46DGR-G in technical solutions:

  1. Q: What is XC6108C46DGR-G? A: XC6108C46DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6108C46DGR-G? A: The operating voltage range of XC6108C46DGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6108C46DGR-G help in technical solutions? A: XC6108C46DGR-G helps in technical solutions by ensuring proper operation and reliability of electronic devices by monitoring the power supply voltage and providing a reset signal when necessary.

  4. Q: Can XC6108C46DGR-G be used in battery-powered applications? A: Yes, XC6108C46DGR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes low quiescent current.

  5. Q: What is the typical reset threshold voltage of XC6108C46DGR-G? A: The typical reset threshold voltage of XC6108C46DGR-G is 4.6V.

  6. Q: Is XC6108C46DGR-G suitable for automotive applications? A: Yes, XC6108C46DGR-G is suitable for automotive applications as it meets the requirements for automotive-grade components.

  7. Q: Can XC6108C46DGR-G be used in industrial control systems? A: Yes, XC6108C46DGR-G can be used in industrial control systems to ensure stable operation and protect sensitive components from voltage fluctuations.

  8. Q: Does XC6108C46DGR-G have built-in hysteresis? A: Yes, XC6108C46DGR-G has built-in hysteresis to prevent oscillation caused by noise or voltage fluctuations near the threshold voltage.

  9. Q: What is the package type of XC6108C46DGR-G? A: XC6108C46DGR-G is available in a small SOT-25 package, which is suitable for space-constrained applications.

  10. Q: Can XC6108C46DGR-G be used in consumer electronics? A: Yes, XC6108C46DGR-G can be used in consumer electronics such as smartphones, tablets, and wearable devices to ensure reliable power supply monitoring and system reset functionality.

Please note that the answers provided here are general and may vary depending on specific application requirements.