Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
XC6108C30DGR-G

XC6108C30DGR-G

Product Overview

Category

XC6108C30DGR-G belongs to the category of voltage regulators.

Use

It is commonly used as a voltage regulator in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Low dropout voltage
  • High output current
  • Thermal shutdown protection
  • Short circuit protection

Package

XC6108C30DGR-G is available in a small surface mount package.

Essence

The essence of XC6108C30DGR-G is to provide stable and regulated voltage output for electronic devices.

Packaging/Quantity

It is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.0V
  • Output Current: Up to 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 50μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108C30DGR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6108C30DGR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Low dropout voltage: It can operate with a minimal voltage difference between input and output.
  • Thermal shutdown protection: The device automatically shuts down when the temperature exceeds a certain threshold, preventing damage.
  • Short circuit protection: XC6108C30DGR-G safeguards against excessive current flow during a short circuit event.

Advantages and Disadvantages

Advantages

  • Provides stable and regulated voltage output
  • Suitable for low-power applications
  • Compact package size
  • Offers thermal and short circuit protection

Disadvantages

  • Limited output current capacity
  • Restricted input voltage range

Working Principles

XC6108C30DGR-G utilizes internal circuitry to regulate the output voltage. It compares the reference voltage with the feedback voltage and adjusts the pass transistor accordingly to maintain a constant output voltage.

Detailed Application Field Plans

XC6108C30DGR-G finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices - Embedded systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108C30DGR-G are: - LM1117-3.0 - MCP1703-3002E/DB - AP2112K-3.0TRG1 - TS2937CP-3.0

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 314 words

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von XC6108C30DGR-G in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of XC6108C30DGR-G in technical solutions:

  1. Question: What is XC6108C30DGR-G?
    Answer: XC6108C30DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6108C30DGR-G?
    Answer: The operating voltage range of XC6108C30DGR-G is typically between 0.9V and 6.0V.

  3. Question: How does XC6108C30DGR-G help in technical solutions?
    Answer: XC6108C30DGR-G ensures stable operation of electronic devices by monitoring the power supply voltage and generating a reset signal to prevent malfunctioning or data corruption during power fluctuations.

  4. Question: Can XC6108C30DGR-G be used in battery-powered applications?
    Answer: Yes, XC6108C30DGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 0.5µA.

  5. Question: What is the output type of XC6108C30DGR-G?
    Answer: XC6108C30DGR-G has an open-drain output type, which means it can be connected to other devices with different voltage levels.

  6. Question: What is the typical reset threshold voltage of XC6108C30DGR-G?
    Answer: The typical reset threshold voltage of XC6108C30DGR-G is 3.0V.

  7. Question: Can XC6108C30DGR-G be used in automotive applications?
    Answer: Yes, XC6108C30DGR-G is suitable for automotive applications as it can operate in a wide temperature range of -40°C to +105°C.

  8. Question: Does XC6108C30DGR-G have any built-in delay time?
    Answer: Yes, XC6108C30DGR-G has a built-in delay time of typically 200ms to ensure stable reset signals during power-on or power-off transitions.

  9. Question: Can XC6108C30DGR-G be used in industrial control systems?
    Answer: Yes, XC6108C30DGR-G is commonly used in industrial control systems to monitor the power supply voltage and provide reliable reset signals to microcontrollers or other critical components.

  10. Question: Is XC6108C30DGR-G available in different package options?
    Answer: Yes, XC6108C30DGR-G is available in various package options such as SOT-25, SOT-89, and USP-6B, providing flexibility for different application requirements.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6108C30DGR-G.