Siehe Spezifikationen für Produktdetails.
XC6108C30CGR-G
Product Overview
Category
XC6108C30CGR-G belongs to the category of voltage regulators.
Use
It is commonly used for voltage regulation in electronic circuits.
Characteristics
- Voltage regulation capability
- Compact package size
- Low power consumption
- Wide input voltage range
Package
XC6108C30CGR-G is available in a small form factor package.
Essence
The essence of XC6108C30CGR-G lies in its ability to regulate voltage efficiently and reliably.
Packaging/Quantity
The product is typically packaged in reels or tubes, with a quantity of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 3.0V
- Output Current: Up to 100mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 10μA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6108C30CGR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- CE: Chip enable pin
Functional Features
- Voltage regulation: XC6108C30CGR-G ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent protection: The device incorporates overcurrent protection to safeguard connected components.
- Low quiescent current: It consumes minimal current when not actively regulating the voltage.
- Thermal shutdown: In case of excessive temperature, the device shuts down to prevent damage.
Advantages and Disadvantages
Advantages
- Efficient voltage regulation
- Small package size
- Low power consumption
- Wide input voltage range
Disadvantages
- Limited output current capacity (up to 100mA)
- Dropout voltage of 200mV may affect certain applications with low input voltages.
Working Principles
XC6108C30CGR-G utilizes a feedback mechanism to maintain a constant output voltage. It compares the output voltage with a reference voltage and adjusts the internal circuitry accordingly. By continuously monitoring and adjusting, it ensures a stable output voltage even when the input voltage varies.
Detailed Application Field Plans
XC6108C30CGR-G finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6108C30CGR-G are: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT
These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.
Word count: 346 words
Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von XC6108C30CGR-G in technischen Lösungen auf
Sure! Here are 10 common questions and answers related to the application of XC6108C30CGR-G in technical solutions:
Q: What is XC6108C30CGR-G? A: XC6108C30CGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6108C30CGR-G? A: The operating voltage range of XC6108C30CGR-G is typically between 0.9V and 6.0V.
Q: How does XC6108C30CGR-G help in technical solutions? A: XC6108C30CGR-G helps in technical solutions by ensuring proper system initialization and preventing data corruption or malfunctioning caused by low voltage conditions.
Q: Can XC6108C30CGR-G be used in battery-powered applications? A: Yes, XC6108C30CGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q: What is the output type of XC6108C30CGR-G? A: XC6108C30CGR-G has an open-drain output type, which allows for flexibility in connecting to different microcontrollers or logic circuits.
Q: What is the typical reset threshold voltage of XC6108C30CGR-G? A: The typical reset threshold voltage of XC6108C30CGR-G is 3.0V.
Q: Does XC6108C30CGR-G have built-in hysteresis? A: Yes, XC6108C30CGR-G has built-in hysteresis of typically 0.1V, which helps to prevent oscillation near the threshold voltage.
Q: Can XC6108C30CGR-G be used in automotive applications? A: Yes, XC6108C30CGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: What is the package type of XC6108C30CGR-G? A: XC6108C30CGR-G is available in a compact SOT-25 package, which is small and easy to integrate into various designs.
Q: Is XC6108C30CGR-G RoHS compliant? A: Yes, XC6108C30CGR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring environmental friendliness and safety.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6108C30CGR-G.