Torex Semiconductor Ltd
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
XC6108C10CGR-G
Im Detail sehen Datenblätter

XC6108C10CGR-G

Product Overview

Category

XC6108C10CGR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage regulation
  • Stabilization of voltage levels
  • Compact size
  • Low power consumption

Package

XC6108C10CGR-G is available in a small surface-mount package.

Essence

The essence of XC6108C10CGR-G lies in its ability to provide stable voltage output for various electronic devices.

Packaging/Quantity

XC6108C10CGR-G is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.0V
  • Output Current: 100mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108C10CGR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6108C10CGR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices.
  • Thermal shutdown: In case of excessive temperature, the regulator shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into various circuit designs.
  • Low power consumption helps conserve energy.
  • Provides stable voltage output even under varying load conditions.

Disadvantages

  • Limited output current capacity (100mA).
  • Dropout voltage of 200mV may affect performance in low voltage applications.

Working Principles

XC6108C10CGR-G operates on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage.

Detailed Application Field Plans

XC6108C10CGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108C10CGR-G are: - LM1117-1.0 - MCP1700-100 - LP2985-1.0 - TPS78230

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 345 words

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von XC6108C10CGR-G in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of XC6108C10CGR-G in technical solutions:

  1. Q: What is XC6108C10CGR-G? A: XC6108C10CGR-G is a voltage detector IC (integrated circuit) used for monitoring power supply voltages in electronic devices.

  2. Q: What is the operating voltage range of XC6108C10CGR-G? A: The operating voltage range of XC6108C10CGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6108C10CGR-G work? A: XC6108C10CGR-G monitors the input voltage and provides a reset signal when the voltage drops below a certain threshold, ensuring proper operation of the device.

  4. Q: What is the output type of XC6108C10CGR-G? A: XC6108C10CGR-G has an open-drain output type, which means it can be connected to other devices with different voltage levels.

  5. Q: What is the typical quiescent current consumption of XC6108C10CGR-G? A: The typical quiescent current consumption of XC6108C10CGR-G is very low, usually around 1.0µA.

  6. Q: Can XC6108C10CGR-G be used in battery-powered applications? A: Yes, XC6108C10CGR-G is suitable for battery-powered applications due to its low quiescent current consumption.

  7. Q: Does XC6108C10CGR-G have built-in hysteresis? A: Yes, XC6108C10CGR-G has built-in hysteresis, which helps prevent oscillation and ensures stable operation.

  8. Q: What is the temperature range for XC6108C10CGR-G? A: XC6108C10CGR-G has a wide operating temperature range of -40°C to +85°C.

  9. Q: Can XC6108C10CGR-G be used in automotive applications? A: Yes, XC6108C10CGR-G is suitable for automotive applications as it meets the necessary standards and has a wide temperature range.

  10. Q: Are there any application notes or reference designs available for XC6108C10CGR-G? A: Yes, the manufacturer provides application notes and reference designs that can help with the implementation of XC6108C10CGR-G in various technical solutions.

Please note that the answers provided here are general and may vary depending on the specific requirements and datasheet of XC6108C10CGR-G.