Torex Semiconductor Ltd
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
XC6108C08CGR-G
Im Detail sehen Datenblätter

XC6108C08CGR-G

Product Overview

Category

XC6108C08CGR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage regulation capability
  • Low dropout voltage
  • High accuracy
  • Thermal shutdown protection
  • Overcurrent protection

Package

XC6108C08CGR-G is available in a compact surface-mount package.

Essence

The essence of XC6108C08CGR-G lies in its ability to provide stable and regulated voltage output for various electronic applications.

Packaging/Quantity

The product is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 0.8V
  • Dropout Voltage: 200mV (typical)
  • Output Current: 150mA (maximum)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108C08CGR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage Regulation: The XC6108C08CGR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Low Dropout Voltage: It exhibits a low dropout voltage, minimizing power dissipation.
  • Thermal Shutdown Protection: In case of excessive temperature, the device shuts down to prevent damage.
  • Overcurrent Protection: It safeguards against excessive current flow, protecting the circuitry.

Advantages and Disadvantages

Advantages

  • High accuracy in voltage regulation
  • Compact size for space-constrained applications
  • Low quiescent current consumption
  • Reliable thermal shutdown and overcurrent protection

Disadvantages

  • Limited output current capacity (150mA maximum)
  • Restricted input voltage range (2.5V - 6.0V)

Working Principles

XC6108C08CGR-G operates based on a feedback control mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage.

Detailed Application Field Plans

XC6108C08CGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wireless communication modules - Battery-powered devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108C08CGR-G are: - LM1117-3.3 - LT1761ES5-3.3 - MCP1700-3302E/TO

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Note: The content provided above is approximately 300 words. Additional information may be required to meet the 1100-word requirement.

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von XC6108C08CGR-G in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of XC6108C08CGR-G in technical solutions:

  1. Q: What is XC6108C08CGR-G? A: XC6108C08CGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6108C08CGR-G? A: The operating voltage range of XC6108C08CGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6108C08CGR-G help in technical solutions? A: XC6108C08CGR-G helps in technical solutions by ensuring proper power supply voltage levels, preventing malfunctions or data corruption during power fluctuations.

  4. Q: Can XC6108C08CGR-G be used in battery-powered applications? A: Yes, XC6108C08CGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  5. Q: What is the output type of XC6108C08CGR-G? A: XC6108C08CGR-G has an open-drain output type, which allows for flexibility in connecting to other devices.

  6. Q: What is the typical reset threshold voltage of XC6108C08CGR-G? A: The typical reset threshold voltage of XC6108C08CGR-G is 0.8V.

  7. Q: Does XC6108C08CGR-G have built-in hysteresis? A: Yes, XC6108C08CGR-G has built-in hysteresis of typically 0.1V, which helps to prevent oscillation near the threshold voltage.

  8. Q: Can XC6108C08CGR-G be used in automotive applications? A: Yes, XC6108C08CGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  9. Q: What is the package type of XC6108C08CGR-G? A: XC6108C08CGR-G is available in a compact SOT-25 package, which is small and easy to integrate into various designs.

  10. Q: Is XC6108C08CGR-G RoHS compliant? A: Yes, XC6108C08CGR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring environmental friendliness and safety.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6108C08CGR-G.