Siehe Spezifikationen für Produktdetails.
UCC3916DPG4 - English Editing Encyclopedia Entry
Product Overview
Category
UCC3916DPG4 belongs to the category of integrated circuits (ICs).
Use
This product is commonly used in power management applications.
Characteristics
- UCC3916DPG4 is a high-performance power management IC.
- It offers various features such as voltage monitoring, protection, and control.
- The IC is designed to enhance the efficiency and reliability of power systems.
Package
UCC3916DPG4 is available in a small outline package (SOP) format.
Essence
The essence of UCC3916DPG4 lies in its ability to provide comprehensive power management solutions for various applications.
Packaging/Quantity
This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.
Specifications
- Input Voltage Range: 2.7V to 5.5V
- Operating Temperature Range: -40°C to +85°C
- Output Voltage Range: 0V to VCC
- Maximum Output Current: 100mA
- Quiescent Current: 10µA (typical)
Detailed Pin Configuration
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- EN: Enable pin
- FB: Feedback pin
- PG: Power good pin
Functional Features
- Voltage Monitoring: UCC3916DPG4 provides accurate voltage monitoring capabilities, ensuring stable power supply operation.
- Protection: The IC incorporates various protection features like overvoltage, undervoltage, and overcurrent protection, safeguarding the system from potential damage.
- Control: It enables precise control of output voltage levels, allowing customization according to specific requirements.
Advantages and Disadvantages
Advantages
- High-performance power management solution
- Comprehensive protection features
- Precise voltage control
- Wide input voltage range
- Low quiescent current
Disadvantages
- Limited maximum output current (100mA)
- Restricted operating temperature range (-40°C to +85°C)
Working Principles
UCC3916DPG4 operates based on a feedback mechanism. It continuously monitors the input and output voltages, comparing them to a reference value. If any deviation is detected, the IC adjusts the output voltage accordingly to maintain stability.
Detailed Application Field Plans
UCC3916DPG4 finds applications in various fields, including: 1. Battery-powered devices 2. Portable electronics 3. Industrial automation systems 4. Automotive electronics 5. Power supply units
Detailed and Complete Alternative Models
- UCC3917DPG4: Similar to UCC3916DPG4 with enhanced output current capability.
- UCC3918DPG4: Offers additional features like temperature monitoring and fault detection.
- UCC3919DPG4: Provides higher input voltage range and increased output current capacity.
These alternative models offer similar functionality to UCC3916DPG4 but may have different specifications or additional features.
In conclusion, UCC3916DPG4 is a high-performance power management IC that provides comprehensive voltage monitoring, protection, and control capabilities. Its wide application field plans and availability of alternative models make it a versatile choice for various power management applications.
Word Count: 411
Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von UCC3916DPG4 in technischen Lösungen auf
Sure! Here are 10 common questions and answers related to the application of UCC3916DPG4 in technical solutions:
Q: What is UCC3916DPG4? A: UCC3916DPG4 is a high-voltage, low-power current sense amplifier used for monitoring and protecting battery systems.
Q: What is the operating voltage range of UCC3916DPG4? A: The operating voltage range of UCC3916DPG4 is typically between 2.7V and 28V.
Q: What is the purpose of using UCC3916DPG4 in technical solutions? A: UCC3916DPG4 is commonly used to monitor battery voltage, current, and temperature in various applications such as electric vehicles, renewable energy systems, and power management.
Q: How does UCC3916DPG4 provide accurate current sensing? A: UCC3916DPG4 utilizes a precision current-sense amplifier with a low offset voltage and high common-mode rejection ratio (CMRR) to ensure accurate current measurements.
Q: Can UCC3916DPG4 handle high voltage spikes or transients? A: Yes, UCC3916DPG4 has built-in protection features like overvoltage and undervoltage lockout, making it capable of handling high voltage spikes or transients.
Q: Does UCC3916DPG4 support temperature monitoring? A: Yes, UCC3916DPG4 includes an integrated temperature sensor that allows for accurate temperature monitoring of the battery system.
Q: Is UCC3916DPG4 compatible with different battery chemistries? A: Yes, UCC3916DPG4 is designed to work with various battery chemistries such as lithium-ion, lead-acid, and nickel-based batteries.
Q: Can UCC3916DPG4 be used in automotive applications? A: Yes, UCC3916DPG4 is suitable for automotive applications due to its wide operating voltage range and robust protection features.
Q: Does UCC3916DPG4 have any diagnostic features? A: Yes, UCC3916DPG4 provides diagnostic outputs such as fault detection and overcurrent indication, which can be used for system monitoring and fault diagnosis.
Q: What are the typical package options available for UCC3916DPG4? A: UCC3916DPG4 is commonly available in small-outline integrated circuit (SOIC) and thin shrink small outline package (TSSOP) packages.
Please note that the answers provided here are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and consult the manufacturer for detailed information.