The TPS3851G33SDRBR belongs to the category of voltage supervisors.
It is primarily used for monitoring and supervising the voltage levels in electronic systems.
The TPS3851G33SDRBR comes in a small outline package (SOT-23) which is compact and easy to integrate into circuit designs.
The essence of the TPS3851G33SDRBR lies in its ability to accurately monitor and supervise voltage levels, ensuring the proper functioning of electronic systems.
This product is typically available in reels containing a specific quantity of units. The exact packaging and quantity may vary depending on the supplier.
The TPS3851G33SDRBR has the following pin configuration:
The TPS3851G33SDRBR operates by comparing the monitored voltage with a precision reference voltage. If the monitored voltage falls below the threshold voltage, the device generates a reset signal. This reset signal can be used to initiate appropriate actions, such as restarting the system or triggering an alarm.
The TPS3851G33SDRBR finds application in various fields, including but not limited to: - Power management systems - Industrial automation - Automotive electronics - Consumer electronics - Medical devices
While the TPS3851G33SDRBR is a reliable voltage supervisor, there are alternative models available in the market that offer similar functionality. Some notable alternatives include: - TPS3839G30DBVR - MAX823LEUK-T - ADM6315-29D2ARTZ-RL7
These alternative models can be considered based on specific design requirements and availability.
Word count: 430 words
Sure! Here are 10 common questions and answers related to the application of TPS3851G33SDRBR in technical solutions:
Q1: What is the TPS3851G33SDRBR? A1: The TPS3851G33SDRBR is a voltage supervisor and reset IC designed for monitoring power supply voltages in various applications.
Q2: What is the operating voltage range of TPS3851G33SDRBR? A2: The TPS3851G33SDRBR operates within a voltage range of 1.6V to 6.5V.
Q3: What is the purpose of using TPS3851G33SDRBR in a technical solution? A3: The TPS3851G33SDRBR is used to monitor power supply voltages and generate a reset signal when the voltage falls below a certain threshold, ensuring proper system operation.
Q4: Can TPS3851G33SDRBR be used in battery-powered applications? A4: Yes, TPS3851G33SDRBR can be used in battery-powered applications as it has a low quiescent current and operates at low voltages.
Q5: What is the typical reset threshold voltage of TPS3851G33SDRBR? A5: The typical reset threshold voltage of TPS3851G33SDRBR is 3.08V.
Q6: Does TPS3851G33SDRBR have an adjustable reset threshold voltage? A6: No, TPS3851G33SDRBR does not have an adjustable reset threshold voltage. It has a fixed threshold voltage.
Q7: Can TPS3851G33SDRBR provide a manual reset option? A7: Yes, TPS3851G33SDRBR provides a manual reset option through the MR pin, allowing for system reset control.
Q8: What is the typical response time of TPS3851G33SDRBR? A8: The typical response time of TPS3851G33SDRBR is 20µs.
Q9: Can TPS3851G33SDRBR be used in automotive applications? A9: Yes, TPS3851G33SDRBR is suitable for automotive applications as it meets the AEC-Q100 Grade 1 qualification standards.
Q10: Does TPS3851G33SDRBR have built-in hysteresis? A10: Yes, TPS3851G33SDRBR has built-in hysteresis to prevent false triggering and ensure stable operation.
Please note that these answers are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.