The TPS3839G18DBZT belongs to the category of voltage supervisors.
It is primarily used for monitoring and controlling the voltage levels in electronic systems.
The TPS3839G18DBZT comes in a small SOT-23 package, which is widely used in the electronics industry.
The essence of the TPS3839G18DBZT lies in its ability to monitor and control voltage levels accurately, ensuring the proper functioning of electronic systems.
The TPS3839G18DBZT is typically available in reels or tape and reel packaging, with a quantity of 3000 units per reel.
The TPS3839G18DBZT has three pins:
The TPS3839G18DBZT operates by comparing the input voltage with the fixed threshold voltage. When the input voltage drops below the threshold, the device triggers the reset signal, indicating a power failure or abnormal voltage condition. Once the input voltage rises above the threshold again, the reset signal is released, allowing the system to resume normal operation.
The TPS3839G18DBZT finds applications in various fields, including but not limited to: - Battery-powered devices - Industrial control systems - Automotive electronics - Medical equipment - Communication systems
These alternative models provide flexibility in choosing the appropriate threshold voltage for specific application requirements.
Word count: 570 words
Sure! Here are 10 common questions and answers related to the application of TPS3839G18DBZT in technical solutions:
1. What is the TPS3839G18DBZT? - The TPS3839G18DBZT is a voltage supervisor and reset IC manufactured by Texas Instruments.
2. What is the purpose of the TPS3839G18DBZT? - The TPS3839G18DBZT is designed to monitor the voltage level of a system and generate a reset signal when the voltage falls below a certain threshold.
3. What is the operating voltage range of the TPS3839G18DBZT? - The TPS3839G18DBZT operates within a voltage range of 1.8V to 6.5V.
4. How does the TPS3839G18DBZT generate a reset signal? - When the monitored voltage drops below the specified threshold, the TPS3839G18DBZT pulls the RESET pin low, indicating a reset condition.
5. Can the threshold voltage be adjusted on the TPS3839G18DBZT? - No, the threshold voltage on the TPS3839G18DBZT is fixed at 1.8V.
6. What is the typical reset time delay of the TPS3839G18DBZT? - The typical reset time delay of the TPS3839G18DBZT is 200ms.
7. Is the TPS3839G18DBZT suitable for battery-powered applications? - Yes, the TPS3839G18DBZT is suitable for battery-powered applications as it has a low quiescent current consumption of typically 1.5µA.
8. Can the TPS3839G18DBZT be used in automotive applications? - Yes, the TPS3839G18DBZT is AEC-Q100 qualified and can be used in automotive applications.
9. Does the TPS3839G18DBZT have any built-in protection features? - Yes, the TPS3839G18DBZT has built-in hysteresis to prevent false triggering due to voltage fluctuations or noise.
10. What package options are available for the TPS3839G18DBZT? - The TPS3839G18DBZT is available in a small SOT-23-5 package, which is suitable for space-constrained applications.
Please note that these answers are general and may vary depending on the specific datasheet and application requirements.