Texas Instruments
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
TPS2393PW
Im Detail sehen Datenblätter

TPS2393PW

Product Overview

Category

The TPS2393PW belongs to the category of integrated circuits (ICs) and specifically falls under the power management ICs.

Use

The TPS2393PW is primarily used for power distribution and protection in various electronic systems. It is commonly employed in applications where multiple power sources need to be managed efficiently.

Characteristics

  • Power management IC with advanced protection features
  • Supports hot-swap and load-sharing capabilities
  • Provides overvoltage, undervoltage, and overcurrent protection
  • Offers fault reporting and diagnostic features
  • Operates at a wide input voltage range
  • Low quiescent current consumption

Package

The TPS2393PW is available in a small outline integrated circuit (SOIC) package. This package type ensures ease of integration into different electronic systems.

Essence

The essence of the TPS2393PW lies in its ability to provide reliable power distribution and protection functions, ensuring the safe operation of electronic devices.

Packaging/Quantity

The TPS2393PW is typically packaged in reels or tubes, containing a specific quantity of ICs per package. The exact packaging and quantity may vary depending on the manufacturer's specifications.

Specifications

  • Input Voltage Range: 2.7V to 18V
  • Output Voltage Range: 0V to 18V
  • Maximum Continuous Current: 1.5A
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: SOIC-8

Detailed Pin Configuration

The TPS2393PW has eight pins arranged as follows:

  1. EN (Enable)
  2. FLT (Fault)
  3. GND (Ground)
  4. IN (Input Voltage)
  5. OUT (Output Voltage)
  6. FB (Feedback)
  7. SS (Soft Start)
  8. VCC (Supply Voltage)

Functional Features

  • Hot-swap and load-sharing capabilities enable seamless power source switching without interrupting the system operation.
  • Overvoltage protection safeguards the connected devices from excessive voltage levels.
  • Undervoltage protection prevents damage to the system by monitoring the input voltage and shutting down if it falls below a specified threshold.
  • Overcurrent protection ensures that the output current does not exceed the maximum limit, preventing damage to the load and the IC itself.
  • Fault reporting and diagnostic features provide valuable information about the system's status and any potential issues.

Advantages and Disadvantages

Advantages

  • Efficient power distribution and protection in electronic systems
  • Wide input voltage range allows compatibility with various power sources
  • Compact SOIC package for easy integration
  • Comprehensive fault reporting and diagnostic features enhance system reliability

Disadvantages

  • Limited maximum continuous current of 1.5A may not be suitable for high-power applications
  • Requires external components for complete power management functionality

Working Principles

The TPS2393PW operates based on a combination of internal circuitry and external components. It monitors the input voltage, output current, and other parameters to ensure proper power distribution and protection. By utilizing various control mechanisms, it manages the power flow between different sources and the load, while also providing fault detection and reporting.

Detailed Application Field Plans

The TPS2393PW finds application in a wide range of electronic systems, including but not limited to: - Industrial automation equipment - Telecommunications infrastructure - Data centers and server racks - Automotive electronics - Power supply units - Battery management systems

Detailed and Complete Alternative Models

  • TPS23861: Similar power management IC with extended features and higher current handling capability.
  • LTC4366: Integrated circuit offering similar power distribution and protection functions with additional surge protection capabilities.
  • MAX5942: Power management IC with advanced features for hot-swap and load-sharing applications.

These alternative models provide similar functionality to the TPS2393PW and can be considered based on specific requirements and system constraints.

Word count: 534 words

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von TPS2393PW in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of TPS2393PW in technical solutions:

  1. Q: What is TPS2393PW? A: TPS2393PW is a power management integrated circuit (PMIC) designed for hot-swap applications, specifically for use in power-over-Ethernet (PoE) systems.

  2. Q: What is the maximum input voltage supported by TPS2393PW? A: The maximum input voltage supported by TPS2393PW is 57V.

  3. Q: Can TPS2393PW handle high current loads? A: Yes, TPS2393PW can handle high current loads up to 1.5A per channel.

  4. Q: Is TPS2393PW suitable for PoE applications? A: Yes, TPS2393PW is specifically designed for PoE applications and provides features like overcurrent protection, undervoltage lockout, and thermal shutdown.

  5. Q: How many channels does TPS2393PW have? A: TPS2393PW has two independent channels, allowing it to control and protect two separate PoE ports.

  6. Q: Does TPS2393PW support power classification for PoE devices? A: Yes, TPS2393PW supports power classification according to IEEE 802.3af/at standards, allowing it to detect and classify connected PoE devices.

  7. Q: Can TPS2393PW provide short-circuit protection? A: Yes, TPS2393PW includes short-circuit protection to prevent damage to the system in case of a fault.

  8. Q: What is the operating temperature range of TPS2393PW? A: TPS2393PW has an operating temperature range of -40°C to 85°C, making it suitable for a wide range of environments.

  9. Q: Does TPS2393PW have built-in thermal shutdown protection? A: Yes, TPS2393PW includes thermal shutdown protection to prevent overheating and ensure safe operation.

  10. Q: Can TPS2393PW be used in non-PoE applications? A: While TPS2393PW is primarily designed for PoE applications, it can also be used in other hot-swap scenarios where its features and specifications align with the requirements.

Please note that these answers are general and may vary depending on the specific implementation and use case. It's always recommended to refer to the datasheet and application notes provided by the manufacturer for detailed information.