Texas Instruments
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
TPS2115PW
Im Detail sehen Datenblätter

TPS2115PW

Product Overview

Category

The TPS2115PW belongs to the category of integrated circuits (ICs) and specifically falls under the power management ICs.

Use

The TPS2115PW is primarily used for power multiplexing applications. It allows for seamless switching between two power sources, enabling efficient power management in various electronic devices.

Characteristics

  • Power multiplexer IC
  • Seamless switching between two power sources
  • Efficient power management
  • Compact package size
  • Low power consumption
  • High reliability

Package

The TPS2115PW comes in a small outline integrated circuit (SOIC) package. This package type provides ease of handling and compatibility with standard PCB manufacturing processes.

Essence

The essence of the TPS2115PW lies in its ability to efficiently manage power sources by seamlessly switching between them, ensuring uninterrupted power supply to electronic devices.

Packaging/Quantity

The TPS2115PW is typically available in reels or tubes, containing a specific quantity of ICs per package. The exact packaging and quantity may vary depending on the supplier.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Switching Frequency: Up to 1MHz
  • Quiescent Current: 20µA (typical)
  • Output Current: Up to 2A
  • On-Resistance: 50mΩ (typical)

Detailed Pin Configuration

The TPS2115PW has a total of 16 pins, each serving a specific function. The pin configuration is as follows:

  1. EN (Enable)
  2. IN1 (Input 1)
  3. IN2 (Input 2)
  4. GND (Ground)
  5. PGND (Power Ground)
  6. VBAT (Battery Voltage)
  7. VOUT (Output Voltage)
  8. SW (Switch)
  9. FB (Feedback)
  10. SS (Soft Start)
  11. PG (Power Good)
  12. FLT (Fault)
  13. NC (No Connection)
  14. NC (No Connection)
  15. NC (No Connection)
  16. VIN (Input Voltage)

Functional Features

  • Seamless power source switching
  • Overcurrent protection
  • Undervoltage lockout
  • Soft start functionality
  • Power good indication
  • Fault detection and reporting

Advantages and Disadvantages

Advantages

  • Efficient power management
  • Compact package size
  • Low power consumption
  • High reliability
  • Overcurrent protection ensures device safety

Disadvantages

  • Limited to two power sources
  • Requires external components for complete functionality

Working Principles

The TPS2115PW operates by continuously monitoring the input voltages from two power sources, IN1 and IN2. It intelligently switches between these sources based on their availability and predefined priority. The enable pin (EN) controls the overall operation of the IC.

When one power source fails or becomes unavailable, the TPS2115PW automatically switches to the other source, ensuring uninterrupted power supply to the connected device. The soft start feature allows for a gradual increase in output voltage, preventing sudden voltage spikes.

Detailed Application Field Plans

The TPS2115PW finds applications in various electronic devices that require efficient power management and seamless power source switching. Some potential application fields include:

  1. Portable electronic devices (e.g., smartphones, tablets, laptops)
  2. Battery-powered systems
  3. Industrial automation equipment
  4. Automotive electronics
  5. IoT devices
  6. Medical devices

Detailed and Complete Alternative Models

  1. TPS2113PW: Similar to TPS2115PW but with a lower output current rating.
  2. TPS2117PW: Similar to TPS2115PW but with a higher output current rating.
  3. TPS2118PW: Similar to TPS2115PW but with additional features such as reverse voltage protection.

These alternative models offer similar functionality to the TPS2115PW but may have different specifications or additional features, catering to specific application requirements.

Word count: 593 words

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von TPS2115PW in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of TPS2115PW in technical solutions:

  1. Q: What is TPS2115PW? A: TPS2115PW is a power multiplexer IC (Integrated Circuit) that allows seamless switching between two power sources.

  2. Q: What are the typical applications of TPS2115PW? A: TPS2115PW is commonly used in battery-powered systems, portable devices, and any application where power source redundancy or power path management is required.

  3. Q: How does TPS2115PW achieve power source redundancy? A: TPS2115PW has two independent input channels, allowing it to connect to two different power sources simultaneously. It automatically selects the higher voltage source as the primary power source.

  4. Q: Can TPS2115PW handle different voltage levels for the two power sources? A: Yes, TPS2115PW can handle power sources with different voltage levels. It supports a wide range of input voltages.

  5. Q: Does TPS2115PW provide any protection features? A: Yes, TPS2115PW offers various protection features like overvoltage protection, undervoltage lockout, and thermal shutdown to safeguard the system from potential damage.

  6. Q: Can TPS2115PW handle high current loads? A: Yes, TPS2115PW has a high current handling capability, typically up to several amps, making it suitable for applications with demanding power requirements.

  7. Q: Is TPS2115PW easy to integrate into existing designs? A: Yes, TPS2115PW is available in a compact package and requires minimal external components, making it relatively easy to integrate into existing designs.

  8. Q: Can TPS2115PW be controlled or monitored by a microcontroller? A: Yes, TPS2115PW can be controlled and monitored through its enable pin, which allows for seamless integration with a microcontroller or other control circuitry.

  9. Q: Does TPS2115PW support hot-swapping of power sources? A: Yes, TPS2115PW supports hot-swapping, allowing for the safe and seamless switching between power sources without interrupting the system operation.

  10. Q: Are there any application notes or reference designs available for TPS2115PW? A: Yes, Texas Instruments, the manufacturer of TPS2115PW, provides application notes, reference designs, and technical documentation to assist engineers in implementing the IC effectively in their designs.

Please note that the answers provided here are general and may vary depending on the specific requirements and implementation of TPS2115PW in different technical solutions.