Texas Instruments
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
TPA2000D1GQCR
Im Detail sehen Datenblätter

TPA2000D1GQCR

Introduction

The TPA2000D1GQCR is a high-performance Class-D audio amplifier belonging to the category of integrated circuits. This device is commonly used in various audio applications due to its compact size, efficiency, and high-quality sound reproduction capabilities.

Basic Information Overview

  • Category: Integrated Circuit
  • Use: Audio Amplification
  • Characteristics: High Performance, Compact Size, Efficiency
  • Package: 9-bump DSBGA, 2.5mm x 2.5mm
  • Essence: High-Quality Sound Reproduction
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Output Power: Up to 3.2W into 3Ω at 5V
  • Efficiency: Up to 90%
  • Operating Voltage: 2.5V to 5.5V
  • Total Harmonic Distortion + Noise (THD+N): 0.015% (typical) at 1kHz, 1.6W into 4Ω
  • Signal-to-Noise Ratio (SNR): 100dB (typical) at 1kHz, 1.6W into 4Ω

Detailed Pin Configuration

The TPA2000D1GQCR features a 9-bump DSBGA package with a detailed pin configuration as follows: 1. OUT- 2. OUT+ 3. GND 4. VDD 5. SD 6. Bypass 7. Bypass 8. GAIN 9. GAIN

Functional Features

  • High Efficiency: The Class-D architecture ensures minimal power loss, resulting in high overall efficiency.
  • Low THD+N: Provides clear and distortion-free audio output.
  • Wide Operating Voltage Range: Can operate from 2.5V to 5.5V, making it suitable for various power supply configurations.

Advantages and Disadvantages

Advantages

  • Compact Size
  • High Efficiency
  • Low Distortion
  • Wide Operating Voltage Range

Disadvantages

  • Sensitive to EMI/RFI interference
  • Requires careful PCB layout for optimal performance

Working Principles

The TPA2000D1GQCR operates on the principle of Class-D amplification, where the input audio signal is converted into a series of pulses to drive the output stage efficiently. This results in minimal power dissipation and high energy efficiency.

Detailed Application Field Plans

The TPA2000D1GQCR finds extensive application in portable audio devices, such as smartphones, tablets, portable speakers, and headphones. Its compact size and high efficiency make it an ideal choice for battery-powered audio systems.

Detailed and Complete Alternative Models

Some alternative models to TPA2000D1GQCR include: - TPA2001D1GQCR - TPA2002D1GQCR - TPA2003D1GQCR

These alternatives offer similar performance and functionality, providing flexibility in design and sourcing options.

In conclusion, the TPA2000D1GQCR is a versatile and efficient audio amplifier integrated circuit suitable for a wide range of portable audio applications, offering high-quality sound reproduction in a compact form factor.

Word Count: 456

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von TPA2000D1GQCR in technischen Lösungen auf

  1. What is the TPA2000D1GQCR?

    • The TPA2000D1GQCR is a stereo Class-D audio amplifier that can be used in various technical solutions to drive speakers or headphones.

  2. What is the maximum output power of the TPA2000D1GQCR?

    • The TPA2000D1GQCR can deliver up to 2.8W per channel into 4Ω loads, making it suitable for small to medium-sized audio applications.

  3. What is the input voltage range for the TPA2000D1GQCR?

    • The TPA2000D1GQCR has an input voltage range of 2.5V to 5.5V, allowing it to be powered by a wide range of sources, including batteries and low-voltage power supplies.

  4. Can the TPA2000D1GQCR be used in portable devices?

    • Yes, the TPA2000D1GQCR's low power consumption and small footprint make it well-suited for use in portable devices such as smartphones, tablets, and portable audio players.

  5. Does the TPA2000D1GQCR require external components for operation?

    • The TPA2000D1GQCR requires minimal external components, typically only needing a few passive components and a power supply to operate.

  6. What is the efficiency of the TPA2000D1GQCR?

    • The TPA2000D1GQCR offers high efficiency, typically above 90%, which helps in conserving power and reducing heat dissipation.

  7. Is the TPA2000D1GQCR suitable for driving headphones?

    • Yes, the TPA2000D1GQCR can drive headphones directly, making it a versatile choice for audio solutions that require headphone amplification.

  8. What protection features does the TPA2000D1GQCR offer?

    • The TPA2000D1GQCR includes built-in short-circuit and thermal protection, safeguarding the amplifier and connected components from potential damage.

  9. Can the TPA2000D1GQCR be used in automotive applications?

    • Yes, the TPA2000D1GQCR is designed to meet automotive specifications, making it suitable for use in car audio systems and other automotive applications.

  10. What are some typical applications for the TPA2000D1GQCR?

    • Typical applications for the TPA2000D1GQCR include portable speakers, gaming headsets, Bluetooth speakers, and other compact audio devices where high-quality audio amplification is required.