Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
SN74LVTH162245DGGR

SN74LVTH162245DGGR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Level Shifter and Bus Transceiver
  • Characteristics: High-speed, low-voltage, 16-bit bidirectional transceiver
  • Package: TSSOP (Thin Shrink Small Outline Package)
  • Essence: Transfers data between two different voltage domains
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Logic Family: LVTH
  • Number of Bits: 16
  • Input Voltage Range: 1.65V to 3.6V
  • Output Voltage Range: 1.65V to 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Propagation Delay: 2.5ns (Max)
  • Output Drive Strength: ±12mA
  • ESD Protection: >2000V

Detailed Pin Configuration

The SN74LVTH162245DGGR has a total of 48 pins, which are divided into four groups:

  • Group A (pins 1-12): Data inputs/output for Port A
  • Group B (pins 13-24): Data inputs/output for Port B
  • Group C (pins 25-36): Control inputs for Port A
  • Group D (pins 37-48): Control inputs for Port B

Functional Features

  • Bidirectional Data Transfer: Allows data transmission in both directions
  • Voltage Translation: Translates signals between two voltage domains
  • 3-State Outputs: Enables high impedance state when not actively driving the bus
  • Automatic Direction Control: Determines the direction of data flow based on control inputs

Advantages and Disadvantages

Advantages: - High-speed operation - Wide input/output voltage range - Low power consumption - ESD protection for robustness - 3-state outputs for bus sharing

Disadvantages: - Limited number of bits (16) - Requires external control signals for direction control - Sensitive to voltage fluctuations

Working Principles

The SN74LVTH162245DGGR is a level shifter and bus transceiver IC that facilitates data transfer between two different voltage domains. It operates by receiving data from one port, translating the voltage levels, and transmitting the data to the other port. The direction of data flow is determined by the control inputs provided externally. The IC also features 3-state outputs, which allow multiple devices to share the same bus without interference.

Detailed Application Field Plans

The SN74LVTH162245DGGR finds applications in various fields, including:

  1. Communication Systems: Used for voltage level translation in serial communication interfaces such as UART, SPI, and I2C.
  2. Industrial Automation: Enables data exchange between different voltage domains in PLCs (Programmable Logic Controllers) and industrial control systems.
  3. Automotive Electronics: Facilitates communication between microcontrollers operating at different voltage levels in automotive applications.
  4. Consumer Electronics: Allows interfacing between components with varying voltage requirements in smartphones, tablets, and gaming consoles.

Detailed and Complete Alternative Models

  1. SN74LVC16245A: Similar 16-bit bidirectional transceiver with lower power consumption.
  2. SN74AVC16245: 16-bit bus transceiver with higher voltage tolerance and wider temperature range.
  3. SN74HCT245: Octal bus transceiver with TTL-level compatibility and higher drive strength.

These alternative models offer similar functionality but may have differences in voltage range, speed, or package type.

Word count: 446 words

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von SN74LVTH162245DGGR in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of SN74LVTH162245DGGR:

  1. Q: What is SN74LVTH162245DGGR? A: SN74LVTH162245DGGR is a 16-bit bus transceiver with 3-state outputs, designed for low-voltage (3.3V) applications.

  2. Q: What is the maximum operating frequency of SN74LVTH162245DGGR? A: The maximum operating frequency of SN74LVTH162245DGGR is typically around 200 MHz.

  3. Q: Can SN74LVTH162245DGGR be used for bidirectional data transfer? A: Yes, SN74LVTH162245DGGR supports bidirectional data transfer, making it suitable for applications where data needs to be transmitted in both directions.

  4. Q: What is the voltage level compatibility of SN74LVTH162245DGGR? A: SN74LVTH162245DGGR is compatible with both 3.3V and 5V logic levels, allowing it to interface with different types of devices.

  5. Q: How many channels does SN74LVTH162245DGGR have? A: SN74LVTH162245DGGR has 16 channels, which means it can handle 16 bits of data simultaneously.

  6. Q: Does SN74LVTH162245DGGR have built-in ESD protection? A: Yes, SN74LVTH162245DGGR features built-in ESD protection, which helps safeguard against electrostatic discharge events.

  7. Q: What is the power supply voltage range for SN74LVTH162245DGGR? A: SN74LVTH162245DGGR operates within a power supply voltage range of 2.7V to 3.6V.

  8. Q: Can SN74LVTH162245DGGR be used in hot-swapping applications? A: Yes, SN74LVTH162245DGGR supports hot-swapping, allowing it to be inserted or removed from a live circuit without causing damage.

  9. Q: What is the output drive strength of SN74LVTH162245DGGR? A: SN74LVTH162245DGGR has a balanced output drive with a typical output current of ±12mA.

  10. Q: Is SN74LVTH162245DGGR RoHS compliant? A: Yes, SN74LVTH162245DGGR is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.