Texas Instruments
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
SN74LS244DW
Im Detail sehen Datenblätter

SN74LS244DW

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Buffer/Line Driver
  • Characteristics:
    • High-speed TTL compatible inputs and outputs
    • Wide operating voltage range
    • Low power consumption
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: Logic buffer with tri-state outputs
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 4.75V to 5.25V
  • Input Voltage Range: 0V to Vcc
  • Output Voltage Range: 0V to Vcc
  • Operating Temperature Range: -40°C to +85°C
  • Propagation Delay Time: 10ns (typical)
  • Output Current: ±24mA

Detailed Pin Configuration

The SN74LS244DW has a 20-pin configuration as follows:

__ __ A1 |1 U 20| Vcc B1 |2 19| A6 A2 |3 18| B6 B2 |4 17| A7 A3 |5 16| B7 B3 |6 15| GND A4 |7 14| A8 B4 |8 13| B8 A5 |9 12| OE# GND |10 11| B5 --------

Functional Features

  • The SN74LS244DW is a non-inverting buffer with tri-state outputs.
  • It provides high-speed signal amplification and buffering capabilities.
  • The tri-state outputs allow for bus sharing and bidirectional communication.

Advantages and Disadvantages

Advantages: - High-speed operation suitable for time-critical applications. - Wide operating voltage range allows compatibility with various systems. - Low power consumption helps reduce energy usage.

Disadvantages: - Limited output current may not be sufficient for certain high-current applications. - Propagation delay time may affect timing-sensitive circuits.

Working Principles

The SN74LS244DW operates by receiving input signals and amplifying them to the corresponding output pins. The tri-state outputs allow the device to be effectively disconnected from the bus when not in use, preventing signal interference. The buffer's logic gates ensure proper signal levels and compatibility with TTL logic.

Detailed Application Field Plans

The SN74LS244DW is commonly used in various applications, including:

  1. Data communication systems
  2. Microprocessor-based systems
  3. Memory interfacing
  4. Industrial control systems
  5. Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as replacements for the SN74LS244DW are:

  1. 74HC244: CMOS logic buffer with similar functionality and pin configuration.
  2. SN74HCT244: High-speed CMOS buffer with tri-state outputs.
  3. CD74ACT244: Advanced CMOS buffer with improved speed and lower power consumption.

These alternatives offer similar features and can be selected based on specific requirements and availability.

Word count: 275 words

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von SN74LS244DW in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of SN74LS244DW:

  1. Q: What is SN74LS244DW? A: SN74LS244DW is a popular octal buffer and line driver integrated circuit (IC) used in various technical solutions.

  2. Q: What is the purpose of SN74LS244DW? A: SN74LS244DW is used to provide buffering and signal amplification for digital signals in electronic circuits.

  3. Q: What voltage levels does SN74LS244DW support? A: SN74LS244DW supports TTL (Transistor-Transistor Logic) voltage levels, typically operating at 5V.

  4. Q: How many channels does SN74LS244DW have? A: SN74LS244DW has 8 channels, allowing it to handle up to 8 separate digital signals.

  5. Q: Can SN74LS244DW be used for bidirectional communication? A: Yes, SN74LS244DW can be used for bidirectional communication by enabling its direction control pins.

  6. Q: What is the maximum current that SN74LS244DW can source or sink? A: SN74LS244DW can source or sink up to 15mA per channel, making it suitable for driving standard logic gates.

  7. Q: Is SN74LS244DW compatible with CMOS (Complementary Metal-Oxide-Semiconductor) logic? A: While SN74LS244DW is not directly compatible with CMOS logic, level-shifting techniques can be used to interface between the two.

  8. Q: Can SN74LS244DW be cascaded to increase the number of channels? A: Yes, multiple SN74LS244DW ICs can be cascaded together to increase the number of channels as required.

  9. Q: What is the maximum operating frequency of SN74LS244DW? A: SN74LS244DW can typically operate at frequencies up to 20MHz, making it suitable for many digital applications.

  10. Q: Are there any special considerations when using SN74LS244DW in high-speed applications? A: Yes, in high-speed applications, careful PCB layout and signal integrity practices should be followed to minimize noise and ensure reliable operation.

Please note that these answers are general and may vary depending on specific application requirements and datasheet specifications.