Texas Instruments
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
SN74ALS573CDW
Im Detail sehen Datenblätter

SN74ALS573CDW

Product Overview

Category

SN74ALS573CDW belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in digital electronic systems for data storage and transfer.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Compatibility with TTL logic levels
  • 3-state outputs for bus-oriented applications

Package

SN74ALS573CDW is available in a 20-pin SOIC (Small Outline Integrated Circuit) package.

Essence

The essence of SN74ALS573CDW lies in its ability to store and transfer digital data efficiently within electronic systems.

Packaging/Quantity

This product is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of ICs. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Supply Voltage: 4.5V to 5.5V
  • Input Voltage: 0V to VCC
  • Output Voltage: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Logic Family: ALS
  • Number of Pins: 20
  • Output Type: 3-State

Detailed Pin Configuration

  1. GND (Ground)
  2. D0 (Data Input 0)
  3. D1 (Data Input 1)
  4. D2 (Data Input 2)
  5. D3 (Data Input 3)
  6. D4 (Data Input 4)
  7. D5 (Data Input 5)
  8. D6 (Data Input 6)
  9. D7 (Data Input 7)
  10. OE (Output Enable)
  11. LE (Latch Enable)
  12. Q0 (Output 0)
  13. Q1 (Output 1)
  14. Q2 (Output 2)
  15. Q3 (Output 3)
  16. Q4 (Output 4)
  17. Q5 (Output 5)
  18. Q6 (Output 6)
  19. Q7 (Output 7)
  20. VCC (Supply Voltage)

Functional Features

  • Data storage and transfer: SN74ALS573CDW can store data on its inputs and transfer it to the outputs when enabled.
  • 3-state outputs: The 3-state outputs allow multiple devices to share a common bus without interfering with each other.

Advantages and Disadvantages

Advantages

  • High-speed operation enables efficient data transfer.
  • Low power consumption helps conserve energy.
  • Wide operating voltage range allows compatibility with various systems.
  • TTL logic level compatibility simplifies integration into existing designs.
  • 3-state outputs facilitate bus-oriented applications.

Disadvantages

  • Limited number of output pins may restrict certain applications requiring more outputs.
  • Availability and pricing may vary depending on the supplier and market conditions.

Working Principles

SN74ALS573CDW operates based on the principles of digital logic circuits. It uses flip-flops to store data and control signals to enable or disable the transfer of data between inputs and outputs. When the latch enable (LE) signal is active, the data on the inputs is latched and stored. The output enable (OE) signal controls whether the stored data is transferred to the outputs or not.

Detailed Application Field Plans

SN74ALS573CDW finds applications in various fields, including: 1. Microprocessor-based systems 2. Communication systems 3. Industrial automation 4. Automotive electronics 5. Consumer electronics

In microprocessor-based systems, this IC can be used for address decoding, data buffering, and interfacing with peripheral devices. In communication systems, it can facilitate data transmission and reception. In industrial automation and automotive electronics, it can be employed for control and monitoring purposes. In consumer electronics, it can enable data storage and transfer within devices.

Detailed and Complete Alternative Models

Some alternative models to SN74ALS573CDW that serve similar functions include: 1. SN74LS373: Octal D-type transparent latch 2. 74HC573: Octal D-type latch with 3-state outputs 3. CD40174: Hex D-type flip-flop with 3-state outputs 4. MC74ACT573: Octal transparent latch with 3-state outputs

These alternative models offer comparable features and can be used as substitutes depending on specific requirements and availability.

Word count: 550 words

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von SN74ALS573CDW in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of SN74ALS573CDW:

  1. Q: What is SN74ALS573CDW? A: SN74ALS573CDW is a type of octal transparent D-type latch with 3-state outputs, commonly used in digital systems.

  2. Q: What is the purpose of SN74ALS573CDW? A: SN74ALS573CDW is used to store and transfer data in digital circuits. It can be used as a latch or a flip-flop depending on the configuration.

  3. Q: What is the maximum operating voltage for SN74ALS573CDW? A: The maximum operating voltage for SN74ALS573CDW is typically 5.5V.

  4. Q: How many data inputs does SN74ALS573CDW have? A: SN74ALS573CDW has 8 data inputs, one for each latch.

  5. Q: Can SN74ALS573CDW be used in high-speed applications? A: Yes, SN74ALS573CDW is designed for high-speed operation and can be used in applications that require fast data transfer.

  6. Q: Does SN74ALS573CDW have output enable pins? A: Yes, SN74ALS573CDW has an active-low output enable pin (OE) that allows the outputs to be enabled or disabled.

  7. Q: What is the typical propagation delay of SN74ALS573CDW? A: The typical propagation delay of SN74ALS573CDW is around 9 ns.

  8. Q: Can SN74ALS573CDW be cascaded to increase the number of latches? A: Yes, multiple SN74ALS573CDW chips can be cascaded together to increase the number of latches in a system.

  9. Q: What is the maximum output current that SN74ALS573CDW can drive? A: SN74ALS573CDW can typically drive up to 24 mA of output current.

  10. Q: Is SN74ALS573CDW compatible with other logic families? A: Yes, SN74ALS573CDW is compatible with a wide range of logic families, including TTL and CMOS.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.