Texas Instruments
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
SN74AC564DWG4
Im Detail sehen Datenblätter

SN74AC564DWG4

Product Overview

Category

SN74AC564DWG4 belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in digital electronic systems for various applications such as data storage, signal processing, and control.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Compatibility with TTL logic levels
  • Schmitt-trigger inputs for noise immunity

Package

SN74AC564DWG4 is available in a 20-pin SOIC (Small Outline Integrated Circuit) package.

Essence

The essence of SN74AC564DWG4 lies in its ability to store and manipulate digital information efficiently within electronic systems.

Packaging/Quantity

This IC is typically packaged in reels or tubes, with a quantity of 2500 units per reel or tube.

Specifications

  • Supply Voltage: 2V to 6V
  • Input Voltage: 0V to VCC
  • Output Voltage: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Logic Family: AC
  • Number of Pins: 20

Detailed Pin Configuration

  1. GND (Ground)
  2. D0 (Data Input 0)
  3. D1 (Data Input 1)
  4. D2 (Data Input 2)
  5. D3 (Data Input 3)
  6. D4 (Data Input 4)
  7. D5 (Data Input 5)
  8. D6 (Data Input 6)
  9. D7 (Data Input 7)
  10. OE (Output Enable)
  11. CP (Clock Pulse)
  12. MR (Master Reset)
  13. Q0 (Output 0)
  14. Q1 (Output 1)
  15. Q2 (Output 2)
  16. Q3 (Output 3)
  17. Q4 (Output 4)
  18. Q5 (Output 5)
  19. Q6 (Output 6)
  20. VCC (Supply Voltage)

Functional Features

  • Data storage and retrieval
  • Parallel input and output
  • Clock-controlled operation
  • Output enable/disable functionality
  • Master reset capability

Advantages and Disadvantages

Advantages

  • High-speed operation allows for efficient data processing.
  • Low power consumption helps in reducing energy requirements.
  • Wide operating voltage range provides flexibility in different applications.
  • Compatibility with TTL logic levels enables easy integration with existing systems.
  • Schmitt-trigger inputs ensure noise immunity, enhancing signal integrity.

Disadvantages

  • Limited number of input and output pins may restrict the complexity of certain applications.
  • Availability of alternative models with additional features or improved performance may limit its competitiveness in some cases.

Working Principles

SN74AC564DWG4 operates based on the principles of digital logic circuits. It utilizes flip-flops to store and manipulate binary information. The clock pulse controls the timing of data transfer and storage. The master reset function allows for clearing the stored data when required. The output enable pin enables or disables the output signals.

Detailed Application Field Plans

SN74AC564DWG4 finds applications in various fields, including: 1. Microcontrollers 2. Data communication systems 3. Industrial automation 4. Automotive electronics 5. Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to SN74AC564DWG4 are: 1. SN74HC564: Similar functionality but operates at a higher voltage range. 2. SN74LS564: Compatible with lower voltage levels but offers slower operation. 3. SN74ACT564: Provides enhanced noise immunity but consumes more power.

These alternative models offer different trade-offs in terms of voltage range, speed, and power consumption, allowing users to choose the most suitable option for their specific requirements.

Word count: 511 words

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von SN74AC564DWG4 in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of SN74AC564DWG4:

  1. Question: What is SN74AC564DWG4?
    - Answer: SN74AC564DWG4 is a specific model of integrated circuit (IC) that belongs to the SN74AC series. It is a 8-bit D-type flip-flop with 3-state outputs.

  2. Question: What is the purpose of SN74AC564DWG4?
    - Answer: SN74AC564DWG4 is commonly used in digital systems for data storage, synchronization, and signal routing applications.

  3. Question: What is the voltage range supported by SN74AC564DWG4?
    - Answer: SN74AC564DWG4 supports a voltage range of 2V to 6V.

  4. Question: How many flip-flops are there in SN74AC564DWG4?
    - Answer: SN74AC564DWG4 consists of 8 individual D-type flip-flops.

  5. Question: What is the maximum clock frequency supported by SN74AC564DWG4?
    - Answer: The maximum clock frequency supported by SN74AC564DWG4 is typically around 100 MHz.

  6. Question: Can SN74AC564DWG4 be used for both synchronous and asynchronous operations?
    - Answer: Yes, SN74AC564DWG4 can be used for both synchronous and asynchronous operations depending on the application requirements.

  7. Question: What are the typical applications of SN74AC564DWG4?
    - Answer: SN74AC564DWG4 is commonly used in microprocessors, memory systems, data buses, and other digital systems where data storage and synchronization are required.

  8. Question: Does SN74AC564DWG4 have 3-state outputs?
    - Answer: Yes, SN74AC564DWG4 has 3-state outputs which allow multiple devices to share a common bus.

  9. Question: What is the power supply voltage required for SN74AC564DWG4?
    - Answer: SN74AC564DWG4 requires a power supply voltage of 2V to 6V.

  10. Question: Is SN74AC564DWG4 available in different package types?
    - Answer: Yes, SN74AC564DWG4 is available in various package types such as SOIC, TSSOP, and PDIP, allowing flexibility in board design and integration.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.