Texas Instruments
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
MC3486NG4
Im Detail sehen Datenblätter

MC3486NG4

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Signal Line Receiver
  • Characteristics: High-speed, Low-power, Wide temperature range
  • Package: DIP (Dual In-line Package)
  • Essence: Analog IC for signal conditioning and amplification
  • Packaging/Quantity: Tube packaging, 25 pieces per tube

Specifications

  • Supply Voltage Range: 3V to 15V
  • Input Voltage Range: -0.5V to VCC + 0.5V
  • Operating Temperature Range: -40°C to +85°C
  • Output Current: ±10mA
  • Propagation Delay Time: 35ns (typical)
  • Input Resistance: 12kΩ (typical)

Detailed Pin Configuration

The MC3486NG4 IC has a total of 14 pins. The pin configuration is as follows:

  1. VCC: Supply voltage input
  2. A: Non-inverting input A
  3. B: Non-inverting input B
  4. C: Non-inverting input C
  5. D: Non-inverting input D
  6. GND: Ground reference
  7. Y: Output Y
  8. Z: Output Z
  9. NC: No connection
  10. NC: No connection
  11. B: Inverting input B
  12. A: Inverting input A
  13. GND: Ground reference
  14. VCC: Supply voltage input

Functional Features

  • High-speed signal line receiver with wide bandwidth
  • Low-power consumption for efficient operation
  • Wide operating temperature range for versatile applications
  • Differential inputs for noise rejection and common-mode interference suppression
  • TTL/CMOS compatible outputs for easy integration with digital systems

Advantages and Disadvantages

Advantages: - High-speed operation allows for reliable data transmission in time-critical applications. - Low-power consumption reduces energy requirements and extends battery life in portable devices. - Wide temperature range enables usage in extreme environmental conditions. - Differential inputs provide excellent noise immunity and signal integrity.

Disadvantages: - Limited output current may restrict use in certain high-current applications. - DIP package may not be suitable for space-constrained designs. - Lack of built-in protection features may require additional circuitry for robust operation.

Working Principles

The MC3486NG4 is a signal line receiver IC that amplifies and conditions analog signals. It operates by receiving differential input signals (A, B, C, D) and converting them into corresponding digital outputs (Y, Z). The differential inputs allow for common-mode noise rejection and improved signal quality. The IC utilizes internal amplification stages and voltage comparators to achieve high-speed operation and accurate signal detection.

Detailed Application Field Plans

The MC3486NG4 is commonly used in various applications, including:

  1. Data Communication Systems: Used as a receiver in serial communication interfaces such as RS-232, RS-485, and UART.
  2. Industrial Automation: Employed in industrial control systems for reliable signal reception and processing.
  3. Automotive Electronics: Integrated into automotive communication networks for data transmission between different vehicle modules.
  4. Instrumentation and Measurement: Utilized in test and measurement equipment for accurate signal acquisition and analysis.
  5. Audio and Video Equipment: Incorporated in audio/video receivers and amplifiers for signal conditioning and amplification.

Detailed and Complete Alternative Models

  1. MAX3486E: Similar signal line receiver IC with enhanced ESD protection.
  2. SN75176: Differential bus transceiver IC with higher output current capability.
  3. LTC2862: Low-power differential line receiver IC with extended temperature range.

These alternative models offer similar functionality and can be considered as substitutes for the MC3486NG4 based on specific application requirements.

Word count: 439 words

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von MC3486NG4 in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of MC3486NG4 in technical solutions:

  1. Q: What is MC3486NG4? A: MC3486NG4 is a quad differential line receiver IC commonly used in communication systems.

  2. Q: What are the key features of MC3486NG4? A: Some key features of MC3486NG4 include low power consumption, wide input voltage range, and high noise immunity.

  3. Q: What is the typical application of MC3486NG4? A: MC3486NG4 is typically used for converting differential signals into single-ended signals in various communication interfaces.

  4. Q: What is the operating voltage range of MC3486NG4? A: The operating voltage range of MC3486NG4 is typically between 4.75V and 5.25V.

  5. Q: Can MC3486NG4 handle high-speed data transmission? A: Yes, MC3486NG4 is designed to handle high-speed data transmission up to several megabits per second.

  6. Q: Does MC3486NG4 have built-in protection features? A: Yes, MC3486NG4 has built-in protection against electrostatic discharge (ESD) and overvoltage conditions.

  7. Q: How many differential inputs does MC3486NG4 support? A: MC3486NG4 supports four differential inputs, making it suitable for applications requiring multiple signal lines.

  8. Q: Can MC3486NG4 be used in industrial environments? A: Yes, MC3486NG4 is designed to operate reliably in industrial environments with extended temperature ranges.

  9. Q: What is the output logic level of MC3486NG4? A: The output logic level of MC3486NG4 is compatible with both TTL and CMOS logic families.

  10. Q: Are there any recommended external components for using MC3486NG4? A: Yes, it is recommended to use external termination resistors and capacitors to optimize the performance of MC3486NG4 in specific applications.

Please note that these answers are general and may vary depending on the specific application and requirements.