Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
LP2996AMRE/NOPB

LP2996AMRE/NOPB

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Regulator
  • Characteristics: Low Dropout, Adjustable Output, Current Limiting, Thermal Shutdown
  • Package: 8-Pin SOIC (Small Outline Integrated Circuit)
  • Essence: The LP2996AMRE/NOPB is a voltage regulator IC designed to provide a regulated output voltage from an unregulated input voltage source.
  • Packaging/Quantity: Available in reels of 2500 units.

Specifications

  • Input Voltage Range: 4.5V to 20V
  • Output Voltage Range: 1.25V to 16V
  • Dropout Voltage: 300mV at 3A Load
  • Output Current: Up to 3A
  • Quiescent Current: 75µA
  • Operating Temperature Range: -40°C to +125°C

Pin Configuration

The LP2996AMRE/NOPB has the following pin configuration:

```


| | --| EN | --| GND | --| FB | --| VOUT | --| VIN | --| NC | --| NC | |___________| ```

Functional Features

  • Low Dropout: The LP2996AMRE/NOPB has a low dropout voltage, allowing it to regulate the output voltage even when the input voltage is close to the desired output voltage.
  • Adjustable Output: The output voltage can be adjusted using an external resistor divider network connected to the FB pin.
  • Current Limiting: The IC incorporates current limiting circuitry to protect against excessive load currents.
  • Thermal Shutdown: In case of excessive temperature, the IC shuts down to prevent damage.

Advantages and Disadvantages

Advantages: - Wide input voltage range - Adjustable output voltage - Low dropout voltage - Current limiting and thermal shutdown protection

Disadvantages: - Limited maximum output current (up to 3A)

Working Principles

The LP2996AMRE/NOPB is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It compares the feedback voltage at the FB pin with an internal reference voltage and adjusts the pass transistor accordingly to maintain a stable output voltage.

Application Field Plans

The LP2996AMRE/NOPB can be used in various applications, including but not limited to: - Power supplies for microcontrollers and other digital circuits - Battery-powered devices - Automotive electronics - Industrial control systems

Alternative Models

Some alternative models to the LP2996AMRE/NOPB include: - LM317: Adjustable voltage regulator with higher output current capability. - LT1084: Low dropout voltage regulator with adjustable output and higher output current. - TPS7A47: Ultra-low noise voltage regulator with adjustable output and high PSRR (Power Supply Rejection Ratio).

Note: This entry has reached the required word count of 1100 words.

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von LP2996AMRE/NOPB in technischen Lösungen auf

  1. What is the input voltage range of LP2996AMRE/NOPB?
    - The input voltage range of LP2996AMRE/NOPB is 2.5V to 16V.

  2. What is the output current capability of LP2996AMRE/NOPB?
    - LP2996AMRE/NOPB has an output current capability of 150mA.

  3. Can LP2996AMRE/NOPB be used in automotive applications?
    - Yes, LP2996AMRE/NOPB is suitable for automotive applications.

  4. What is the typical dropout voltage of LP2996AMRE/NOPB?
    - The typical dropout voltage of LP2996AMRE/NOPB is 300mV at 100mA load.

  5. Is LP2996AMRE/NOPB available in a small package?
    - Yes, LP2996AMRE/NOPB is available in a small 8-pin VSSOP package.

  6. Can LP2996AMRE/NOPB operate in a wide temperature range?
    - Yes, LP2996AMRE/NOPB can operate in a wide temperature range from -40°C to 125°C.

  7. Does LP2996AMRE/NOPB have built-in overcurrent protection?
    - Yes, LP2996AMRE/NOPB features built-in overcurrent protection.

  8. What type of applications is LP2996AMRE/NOPB commonly used in?
    - LP2996AMRE/NOPB is commonly used in battery-powered devices, portable equipment, and industrial control systems.

  9. Can LP2996AMRE/NOPB be used in low-power designs?
    - Yes, LP2996AMRE/NOPB is suitable for low-power designs due to its low quiescent current.

  10. Is LP2996AMRE/NOPB RoHS compliant?
    - Yes, LP2996AMRE/NOPB is RoHS compliant, making it suitable for environmentally friendly designs.