Texas Instruments
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
CD4013BMG4
Im Detail sehen Datenblätter

CD4013BMG4

Product Overview

Category

CD4013BMG4 belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in digital electronic systems for various applications.

Characteristics

  • CD4013BMG4 is a dual D-type flip-flop integrated circuit.
  • It operates on a wide voltage range, typically between 3V and 18V.
  • The IC is designed to have low power consumption, making it suitable for battery-powered devices.
  • It has high noise immunity, ensuring reliable operation even in noisy environments.
  • CD4013BMG4 offers fast switching speeds, enabling efficient data processing.

Package

The CD4013BMG4 is available in a standard 14-pin package.

Essence

The essence of CD4013BMG4 lies in its ability to store and manipulate digital information using flip-flops.

Packaging/Quantity

This product is typically sold in reels or tubes, with quantities varying depending on the supplier.

Specifications

  • Supply Voltage: 3V to 18V
  • Logic Family: CMOS
  • Number of Flip-Flops: 2
  • Operating Temperature Range: -40°C to 85°C
  • Package Type: SOIC-14

Detailed Pin Configuration

The CD4013BMG4 has a total of 14 pins. Here is the detailed pin configuration:

  1. Pin 1: Data Input (D1)
  2. Pin 2: Clock Input (CLK1)
  3. Pin 3: Set Input (SET1)
  4. Pin 4: Reset Input (RESET1)
  5. Pin 5: Q Output (Q1)
  6. Pin 6: Q Complementary Output (Q̅1)
  7. Pin 7: Ground (GND)
  8. Pin 8: Q Complementary Output (Q̅2)
  9. Pin 9: Q Output (Q2)
  10. Pin 10: Reset Input (RESET2)
  11. Pin 11: Set Input (SET2)
  12. Pin 12: Clock Input (CLK2)
  13. Pin 13: Data Input (D2)
  14. Pin 14: Supply Voltage (VDD)

Functional Features

  • CD4013BMG4 offers independent data, clock, set, and reset inputs for each flip-flop.
  • It has complementary outputs for both flip-flops, providing flexibility in circuit design.
  • The IC supports synchronous operation, ensuring accurate timing of data storage and retrieval.
  • CD4013BMG4 exhibits high noise immunity, making it suitable for use in noisy environments.
  • It has a wide operating voltage range, allowing compatibility with various power supply systems.

Advantages and Disadvantages

Advantages

  • Low power consumption, ideal for battery-powered devices.
  • High noise immunity ensures reliable operation.
  • Fast switching speeds enable efficient data processing.
  • Wide operating voltage range provides versatility.

Disadvantages

  • Limited number of flip-flops (2) compared to other ICs.
  • May require additional external components for certain applications.

Working Principles

The CD4013BMG4 operates based on the principles of D-type flip-flops. Each flip-flop stores one bit of digital information. The data input (D) determines the state of the flip-flop, while the clock input (CLK) controls when the data is stored or retrieved. The set (SET) and reset (RESET) inputs allow for initialization of the flip-flop's state.

Detailed Application Field Plans

CD4013BMG4 finds applications in various digital electronic systems, including but not limited to: - Counters and frequency dividers - Shift registers - Data storage and retrieval systems - Control circuits - Timing circuits

Detailed and Complete Alternative Models

Some alternative models to CD4013BMG4 include: - CD74HC74E - SN74LS74AN - MC14013BCL

These alternatives offer similar functionality and can be used as replacements for CD4013BMG4 in various applications.

Word count: 529 words

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von CD4013BMG4 in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of CD4013BMG4 in technical solutions:

  1. Q: What is CD4013BMG4? A: CD4013BMG4 is a dual D-type flip-flop integrated circuit (IC) that can store one bit of data.

  2. Q: What are the typical applications of CD4013BMG4? A: CD4013BMG4 is commonly used in digital systems for tasks like data synchronization, frequency division, and waveform generation.

  3. Q: What is the operating voltage range of CD4013BMG4? A: The operating voltage range of CD4013BMG4 is typically between 3V and 18V.

  4. Q: How many flip-flops are there in CD4013BMG4? A: CD4013BMG4 contains two independent D-type flip-flops.

  5. Q: What is the maximum clock frequency supported by CD4013BMG4? A: CD4013BMG4 can operate at clock frequencies up to several megahertz, depending on the specific conditions and power supply voltage.

  6. Q: Can CD4013BMG4 be used in both positive-edge and negative-edge triggered applications? A: Yes, CD4013BMG4 supports both positive-edge and negative-edge triggering, making it versatile for various applications.

  7. Q: What is the power consumption of CD4013BMG4? A: The power consumption of CD4013BMG4 depends on factors such as clock frequency, input switching rate, and supply voltage. It is typically low in most applications.

  8. Q: Does CD4013BMG4 have any built-in protection features? A: CD4013BMG4 has built-in protection against electrostatic discharge (ESD) and latch-up, which helps to enhance its reliability.

  9. Q: Can CD4013BMG4 operate in a wide temperature range? A: Yes, CD4013BMG4 is designed to operate reliably over a wide temperature range, typically from -40°C to 85°C.

  10. Q: Is CD4013BMG4 available in different package types? A: Yes, CD4013BMG4 is available in various package options, including SOIC, TSSOP, and PDIP, allowing flexibility in board design and integration.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications for CD4013BMG4.