STMicroelectronics
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
VNQ6040S-E
Im Detail sehen Datenblätter

VNQ6040S-E

Product Overview

Category: Integrated Circuit (IC)

Use: The VNQ6040S-E is a power driver IC designed for automotive applications. It is specifically used for driving resistive, inductive, and capacitive loads.

Characteristics: - High current capability - Low saturation voltage - Overtemperature protection - Short-circuit protection - ESD protection

Package: The VNQ6040S-E is available in a PowerSSO-36 package.

Essence: This IC serves as a reliable and efficient solution for controlling various loads in automotive systems.

Packaging/Quantity: The VNQ6040S-E is typically sold in reels containing 250 units per reel.

Specifications

  • Supply Voltage Range: 5V to 36V
  • Output Current: Up to 40A
  • On-state Resistance: 19mΩ (max)
  • Operating Temperature Range: -40°C to +150°C

Pin Configuration

The VNQ6040S-E has a total of 36 pins. The pin configuration is as follows:

  1. IN1
  2. IN2
  3. IN3
  4. IN4
  5. GND
  6. OUT1
  7. OUT2
  8. OUT3
  9. OUT4
  10. VCC
  11. VBB
  12. DIAG
  13. SENSE1
  14. SENSE2
  15. SENSE3
  16. SENSE4
  17. VREF
  18. NC
  19. NC
  20. NC
  21. NC
  22. NC
  23. NC
  24. NC
  25. NC
  26. NC
  27. NC
  28. NC
  29. NC
  30. NC
  31. NC
  32. NC
  33. NC
  34. NC
  35. NC
  36. NC

Functional Features

  • High current driving capability allows for efficient control of various loads.
  • Low saturation voltage minimizes power dissipation and improves overall system efficiency.
  • Overtemperature protection ensures safe operation even under extreme temperature conditions.
  • Short-circuit protection prevents damage to the IC and connected loads in case of a fault.
  • ESD protection safeguards the IC against electrostatic discharge, enhancing its reliability.

Advantages and Disadvantages

Advantages: - High current capability enables driving of demanding loads. - Low saturation voltage reduces power losses. - Comprehensive protection features enhance system safety and reliability. - Wide operating temperature range allows for use in harsh environments.

Disadvantages: - Limited pin configuration options may restrict certain application scenarios. - Higher cost compared to some alternative models.

Working Principles

The VNQ6040S-E operates based on a combination of internal circuitry and external control signals. The input signals (IN1 to IN4) determine the state of the outputs (OUT1 to OUT4), controlling the connected loads accordingly. The IC utilizes MOSFET technology to achieve high current driving capabilities while minimizing power losses.

Detailed Application Field Plans

The VNQ6040S-E finds extensive application in the automotive industry, particularly in systems that require precise control of resistive, inductive, or capacitive loads. Some specific application areas include:

  1. Automotive lighting systems
  2. Motor control in electric vehicles
  3. Power distribution modules
  4. Solenoid control in transmission systems
  5. Actuator control in HVAC systems

Detailed and Complete Alternative Models

  1. VNQ6004A-E: Similar functionality with lower current capability (up to 4A).
  2. VNQ6012A-E: Lower current capability (up to 12A) but with additional diagnostic features.
  3. VNQ6040SA-E: Enhanced version with improved thermal performance and higher current capability (up to 60A).

These alternative models provide flexibility in choosing the appropriate IC based on specific application requirements.

Word count: 470 words

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von VNQ6040S-E in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of VNQ6040S-E in technical solutions:

  1. Question: What is the VNQ6040S-E?
    Answer: The VNQ6040S-E is a quad channel high-side driver designed for automotive applications.

  2. Question: What is the maximum supply voltage for the VNQ6040S-E?
    Answer: The maximum supply voltage for the VNQ6040S-E is 36V.

  3. Question: Can the VNQ6040S-E handle high currents?
    Answer: Yes, the VNQ6040S-E can handle a continuous output current of up to 4A per channel.

  4. Question: Is the VNQ6040S-E suitable for driving inductive loads?
    Answer: Yes, the VNQ6040S-E is designed to drive inductive loads such as solenoids and motors.

  5. Question: Does the VNQ6040S-E have built-in protection features?
    Answer: Yes, the VNQ6040S-E includes various protection features like overtemperature shutdown, overcurrent protection, and undervoltage lockout.

  6. Question: Can I control the VNQ6040S-E using a microcontroller?
    Answer: Yes, the VNQ6040S-E can be controlled using a microcontroller through its logic-level inputs.

  7. Question: What is the operating temperature range of the VNQ6040S-E?
    Answer: The VNQ6040S-E can operate within a temperature range of -40°C to +150°C.

  8. Question: How many channels does the VNQ6040S-E have?
    Answer: The VNQ6040S-E has four independent channels.

  9. Question: Can the VNQ6040S-E be used in automotive applications?
    Answer: Yes, the VNQ6040S-E is specifically designed for automotive applications and meets the relevant industry standards.

  10. Question: What is the package type of the VNQ6040S-E?
    Answer: The VNQ6040S-E is available in a PowerSSO-36 package.

Please note that these answers are general and may vary depending on the specific application and requirements.