STMicroelectronics
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
VN380SP-E
Im Detail sehen Datenblätter

VN380SP-E

Product Overview

Category: Integrated Circuits (ICs)

Use: The VN380SP-E is a high-side driver IC designed for automotive applications. It is specifically used to control resistive loads in automotive systems, such as lamps, motors, and solenoids.

Characteristics: - High voltage capability - Over-temperature protection - Short-circuit protection - Low standby current consumption

Package: The VN380SP-E is available in a small surface-mount package, which ensures easy integration into automotive electronic systems.

Essence: This IC serves as a reliable and efficient solution for driving various resistive loads in automotive applications.

Packaging/Quantity: The VN380SP-E is typically sold in reels containing 2500 units per reel.

Specifications

  • Supply Voltage Range: 4.5V to 36V
  • Output Current: Up to 1A
  • On-State Resistance: 0.3Ω (typical)
  • Operating Temperature Range: -40°C to +150°C

Detailed Pin Configuration

The VN380SP-E features a 6-pin configuration:

  1. IN: Input pin for controlling the high-side switch.
  2. GND: Ground reference pin.
  3. OUT: Output pin connected to the load.
  4. EN: Enable pin for turning the device on or off.
  5. PGND: Power ground pin.
  6. VS: Supply voltage pin.

Functional Features

  • Over-Temperature Protection: The VN380SP-E incorporates built-in thermal shutdown protection, ensuring safe operation even under high-temperature conditions.
  • Short-Circuit Protection: The IC includes short-circuit protection, preventing damage to the device and load in case of a short circuit.
  • Low Standby Current Consumption: The VN380SP-E has a low standby current consumption, reducing power dissipation and enhancing energy efficiency.

Advantages and Disadvantages

Advantages: - High voltage capability allows for compatibility with various automotive systems. - Over-temperature and short-circuit protection ensure safe operation. - Low standby current consumption improves energy efficiency.

Disadvantages: - Limited output current of up to 1A may not be suitable for high-power applications. - The IC is specifically designed for automotive use, limiting its applicability in other industries.

Working Principles

The VN380SP-E operates as a high-side driver by controlling the flow of current through the load connected to the output pin. It utilizes an internal charge pump to generate the necessary voltage level required to drive the load effectively. The enable pin allows for easy on/off control of the device.

Detailed Application Field Plans

The VN380SP-E finds extensive application in the automotive industry, particularly in controlling resistive loads. Some specific applications include:

  1. Automotive lighting systems (headlights, taillights, interior lights)
  2. Window lift motors
  3. Seat adjustment motors
  4. HVAC system actuators
  5. Solenoid valves

Detailed and Complete Alternative Models

  1. VN380SP-E-E: Similar to VN380SP-E, but with extended temperature range (-40°C to +175°C).
  2. VN381SP-E: Higher current version of VN380SP-E, capable of driving loads up to 2A.
  3. VN382SP-E: Dual-channel version of VN380SP-E, allowing control of two independent loads simultaneously.

These alternative models offer flexibility and expanded capabilities based on specific application requirements.

Word count: 411 words

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von VN380SP-E in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of VN380SP-E in technical solutions:

  1. Q: What is the VN380SP-E? A: The VN380SP-E is a high-side driver designed for automotive applications, capable of driving resistive, capacitive, and inductive loads.

  2. Q: What is the maximum load current that the VN380SP-E can handle? A: The VN380SP-E can handle a maximum load current of 1.5A.

  3. Q: Can the VN380SP-E be used in both 12V and 24V automotive systems? A: Yes, the VN380SP-E is suitable for use in both 12V and 24V automotive systems.

  4. Q: Is the VN380SP-E protected against over-temperature conditions? A: Yes, the VN380SP-E has built-in thermal shutdown protection to prevent damage from over-temperature conditions.

  5. Q: Can the VN380SP-E be used with PWM signals? A: Yes, the VN380SP-E is compatible with PWM (Pulse Width Modulation) signals and can be used for various applications requiring PWM control.

  6. Q: Does the VN380SP-E have short-circuit protection? A: Yes, the VN380SP-E features short-circuit protection, which helps protect the device and the load in case of a short circuit.

  7. Q: Can the VN380SP-E be used in harsh environments? A: Yes, the VN380SP-E is designed to operate in harsh automotive environments, with a wide operating temperature range and robust protection features.

  8. Q: What is the input voltage range for the VN380SP-E? A: The VN380SP-E has an input voltage range of 4.5V to 36V, making it suitable for a wide range of automotive applications.

  9. Q: Does the VN380SP-E require an external flyback diode? A: No, the VN380SP-E has an integrated flyback diode, eliminating the need for an external diode in most applications.

  10. Q: Can the VN380SP-E be used for both high-side and low-side switching? A: No, the VN380SP-E is specifically designed for high-side switching applications only. For low-side switching, a different driver should be used.

Please note that these answers are general and may vary depending on the specific application and requirements. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.