STMicroelectronics
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
M24C01-RMN6P
Im Detail sehen Datenblätter

M24C01-RMN6P

Product Overview

Category

The M24C01-RMN6P belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

It is used for non-volatile data storage in various electronic devices, such as consumer electronics, automotive systems, and industrial applications.

Characteristics

  • Non-volatile memory
  • I2C interface
  • Low power consumption
  • High reliability
  • Small form factor

Package

The M24C01-RMN6P is available in a small outline package (SO8) and is RoHS compliant.

Essence

The essence of the M24C01-RMN6P lies in its ability to store and retrieve data reliably in a wide range of operating conditions.

Packaging/Quantity

The chip is typically supplied in tape and reel packaging with a quantity of 2500 units per reel.

Specifications

  • Memory Capacity: 1 Kbit
  • Interface: I2C
  • Operating Voltage: 1.7V to 5.5V
  • Operating Temperature: -40°C to 85°C
  • Write Endurance: 4 million cycles
  • Data Retention: 200 years

Detailed Pin Configuration

The M24C01-RMN6P has 8 pins arranged as follows: 1. A0: Chip address input 2. A1: Chip address input 3. A2: Chip address input 4. VSS: Ground 5. SDA: Serial data input/output 6. SCL: Serial clock input 7. WP: Write protect 8. VCC: Power supply

Functional Features

  • Byte and Page Write Modes
  • Write Protect Function
  • Software Write Protection
  • Schmitt Trigger Inputs
  • Noise Suppression on SDA/SCL Inputs

Advantages and Disadvantages

Advantages

  • Low power consumption
  • High reliability and endurance
  • Small form factor
  • Wide operating voltage range

Disadvantages

  • Limited storage capacity compared to other EEPROM chips
  • Slower write speeds compared to some competing models

Working Principles

The M24C01-RMN6P operates by using an I2C interface to communicate with the host device. It stores data in non-volatile memory cells that can be electrically erased and reprogrammed.

Detailed Application Field Plans

The M24C01-RMN6P is suitable for use in a wide range of applications, including: - Smart meters - Automotive ECUs - Industrial control systems - Consumer electronics - Medical devices

Detailed and Complete Alternative Models

Some alternative models to the M24C01-RMN6P include: - AT24C01C from Microchip Technology - CAT24C01 from ON Semiconductor - 24AA01 from Microchip Technology

In conclusion, the M24C01-RMN6P is a versatile and reliable EEPROM chip suitable for various electronic applications, offering low power consumption, high reliability, and a compact form factor.

[Word Count: 457]

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von M24C01-RMN6P in technischen Lösungen auf

  1. What is the M24C01-RMN6P?

    • The M24C01-RMN6P is a 1-Kbit serial I2C bus EEPROM (Electrically Erasable Programmable Read-Only Memory) that can be used for non-volatile data storage in various technical solutions.

  2. What are the key features of the M24C01-RMN6P?

    • The key features include a 128-byte page write capability, a write protect pin, and an endurance of 4 million write/erase cycles with a data retention of 40 years.

  3. How is the M24C01-RMN6P typically interfaced with microcontrollers or other devices?

    • The M24C01-RMN6P is typically interfaced using the I2C bus protocol, which allows for easy integration with microcontrollers and other devices.

  4. What are some common applications for the M24C01-RMN6P in technical solutions?

    • Common applications include storing configuration data, calibration parameters, and other non-volatile data in embedded systems, IoT devices, and consumer electronics.

  5. What are the voltage requirements for the M24C01-RMN6P?

    • The M24C01-RMN6P operates within a voltage range of 1.7V to 5.5V, making it suitable for a wide variety of applications.

  6. Can the M24C01-RMN6P be used in automotive applications?

    • Yes, the M24C01-RMN6P is qualified for automotive applications and meets the AEC-Q100 standard, making it suitable for use in automotive electronics.

  7. Does the M24C01-RMN6P support software write protection?

    • Yes, the M24C01-RMN6P supports software write protection, allowing specific memory areas to be protected from accidental writes.

  8. What is the maximum frequency at which the M24C01-RMN6P can operate?

    • The M24C01-RMN6P can operate at a maximum clock frequency of 400 kHz, enabling fast data transfer in compatible systems.

  9. Are there any special considerations for handling and storage of the M24C01-RMN6P?

    • It is important to handle the M24C01-RMN6P in accordance with ESD (Electrostatic Discharge) precautions and store it in dry, non-condensing environments to ensure its reliability.

  10. Where can I find detailed technical information and application notes for the M24C01-RMN6P?

    • Detailed technical information and application notes for the M24C01-RMN6P can be found in the datasheet provided by the manufacturer, as well as on their official website.