Silego Technology
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
SLG7NT614V
Im Detail sehen Datenblätter

SLG7NT614V

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High efficiency, compact size, low power consumption
  • Package: QFN (Quad Flat No-leads)
  • Essence: Power management IC designed for various applications
  • Packaging/Quantity: Available in tape and reel packaging, quantity depends on customer requirements

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to 3.3V
  • Maximum Output Current: 600mA
  • Operating Temperature Range: -40°C to +85°C
  • Efficiency: Up to 95%
  • Switching Frequency: 1.2MHz

Detailed Pin Configuration

The SLG7NT614V has a total of 16 pins arranged as follows:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. SW: Switching pin
  4. FB: Feedback pin
  5. EN: Enable pin
  6. PG: Power Good pin
  7. VOUT: Output voltage pin

Functional Features

  • Integrated synchronous buck regulator
  • Adjustable output voltage through external resistors
  • Soft-start function for controlled startup
  • Overcurrent protection
  • Thermal shutdown protection
  • Power good indicator

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption
  • Compact size allows for space-saving designs
  • Wide input voltage range enables versatile applications
  • Integrated protection features enhance reliability

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications
  • Requires external components for proper operation

Working Principles

The SLG7NT614V is a step-down (buck) voltage regulator that converts a higher input voltage to a lower output voltage. It utilizes a synchronous rectification technique to achieve high efficiency. The regulator operates by switching the input voltage on and off at a high frequency, and then filtering and regulating the output voltage to the desired level.

Detailed Application Field Plans

The SLG7NT614V is commonly used in various battery-powered devices, such as:

  1. Mobile phones
  2. Tablets
  3. Portable media players
  4. Wearable devices
  5. IoT (Internet of Things) devices

Its compact size, low power consumption, and wide input voltage range make it suitable for these applications.

Detailed and Complete Alternative Models

  1. SLG7NT615V: Similar to SLG7NT614V but with higher maximum output current (800mA)
  2. SLG7NT613V: Similar to SLG7NT614V but with lower maximum output current (400mA)
  3. SLG7NT612V: Similar to SLG7NT614V but with fixed output voltage (3.3V)

These alternative models provide options based on specific requirements and can be considered as alternatives to the SLG7NT614V.

Word count: 345 words

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von SLG7NT614V in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of SLG7NT614V in technical solutions:

  1. Q: What is SLG7NT614V? A: SLG7NT614V is a specific model of GreenPAK™ mixed-signal configurable device manufactured by Dialog Semiconductor.

  2. Q: What are the key features of SLG7NT614V? A: SLG7NT614V offers low power consumption, high integration, programmability, and flexibility for various applications.

  3. Q: What are the typical applications of SLG7NT614V? A: SLG7NT614V is commonly used in power management, system control, sensor interfacing, and general-purpose digital logic applications.

  4. Q: How does SLG7NT614V help in power management? A: SLG7NT614V provides programmable analog and digital blocks that can be configured to implement power sequencing, voltage monitoring, and other power management functions.

  5. Q: Can SLG7NT614V interface with sensors? A: Yes, SLG7NT614V has built-in analog-to-digital converters (ADCs) and digital-to-analog converters (DACs) that enable direct sensor interfacing.

  6. Q: Is SLG7NT614V suitable for battery-powered devices? A: Yes, SLG7NT614V's low power consumption makes it well-suited for battery-powered applications, helping to extend battery life.

  7. Q: Can SLG7NT614V be programmed after manufacturing? A: Yes, SLG7NT614V can be reprogrammed even after it has been soldered onto a PCB, allowing for flexibility and customization.

  8. Q: What programming tools are required for SLG7NT614V? A: Dialog Semiconductor provides a graphical programming tool called GreenPAK Designer, which allows users to configure SLG7NT614V easily.

  9. Q: Can SLG7NT614V communicate with other devices or microcontrollers? A: Yes, SLG7NT614V supports various communication protocols like I2C, SPI, and UART, enabling seamless integration with other devices.

  10. Q: Where can I find more information about SLG7NT614V? A: You can visit Dialog Semiconductor's website or refer to the SLG7NT614V datasheet for detailed technical specifications and application examples.

Please note that the answers provided here are general and may vary depending on specific use cases and requirements.