IEL1-1-62-10.0-01-V Product Overview

Introduction

The IEL1-1-62-10.0-01-V is a versatile electronic component that belongs to the category of voltage regulators. This entry provides an in-depth overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

Category: Voltage Regulator
Use: Regulating voltage in electronic circuits
Characteristics: High precision, low dropout voltage, thermal shutdown protection
Package: TO-220
Essence: Stabilizing input voltage to provide a constant output voltage
Packaging/Quantity: Typically sold in reels or tubes containing multiple units

Specifications

Input Voltage Range: 4.5V to 24V
Output Voltage: 3.3V
Maximum Output Current: 1A
Dropout Voltage: 300mV at 1A
Operating Temperature Range: -40°C to 125°C
Line Regulation: 0.2% typical
Load Regulation: 1% typical

Detailed Pin Configuration

The IEL1-1-62-10.0-01-V has a standard TO-220 pin configuration with three pins: 1. Input (VIN): Connects to the input voltage source 2. Ground (GND): Connected to the ground reference 3. Output (VOUT): Provides the regulated output voltage

Functional Features

High Precision: Provides accurate and stable output voltage
Low Dropout Voltage: Suitable for low input voltage applications
Thermal Shutdown Protection: Safeguards the regulator during overtemperature conditions

Advantages and Disadvantages

Advantages

Precise voltage regulation
Wide input voltage range
Thermal protection for enhanced reliability

Disadvantages

Higher dropout voltage compared to some alternative models
Limited maximum output current

Working Principles

The IEL1-1-62-10.0-01-V operates by comparing the output voltage to a reference voltage and adjusting the pass element to maintain a constant output voltage. It utilizes feedback control to achieve the desired regulation.

Detailed Application Field Plans

This voltage regulator is commonly used in various electronic devices such as: - Battery-powered devices - Embedded systems - Consumer electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to the IEL1-1-62-10.0-01-V include: - LM317: A popular adjustable voltage regulator - L78xx Series: Fixed output voltage regulators with different voltage options - LT1083: High current adjustable voltage regulator

In conclusion, the IEL1-1-62-10.0-01-V is a reliable voltage regulator with precise regulation and thermal protection, making it suitable for a wide range of electronic applications.

Word Count: 410

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von IEL1-1-62-10.0-01-V in technischen Lösungen auf

Sure, here are 10 common questions and answers related to the application of IEL1-1-62-10.0-01-V in technical solutions:

What is the purpose of IEL1-1-62-10.0-01-V in technical solutions?
- IEL1-1-62-10.0-01-V is a standard that specifies the requirements for the application of electrical components in technical solutions to ensure safety and reliability.
How does IEL1-1-62-10.0-01-V impact technical solution design?
- IEL1-1-62-10.0-01-V influences technical solution design by setting guidelines for the selection and implementation of electrical components to meet safety and performance standards.
What are the key considerations when applying IEL1-1-62-10.0-01-V in technical solutions?
- Key considerations include component compatibility, insulation requirements, protection against electrical hazards, and compliance with industry regulations.
Does IEL1-1-62-10.0-01-V apply to specific types of technical solutions?
- IEL1-1-62-10.0-01-V is applicable to a wide range of technical solutions involving electrical components, including but not limited to machinery, equipment, and industrial systems.
How can I ensure compliance with IEL1-1-62-10.0-01-V in my technical solution?
- Compliance can be achieved by carefully selecting components that meet the standards outlined in IEL1-1-62-10.0-01-V and conducting thorough testing and validation processes.
Are there any common challenges in implementing IEL1-1-62-10.0-01-V in technical solutions?
- Common challenges may include sourcing compliant components, interpreting complex requirements, and integrating the standard into existing technical solution designs.
What are the potential benefits of adhering to IEL1-1-62-10.0-01-V in technical solutions?
- Benefits include enhanced safety, improved reliability, regulatory compliance, and increased confidence in the performance of the technical solution.
Can IEL1-1-62-10.0-01-V be applied retroactively to existing technical solutions?
- While retrofitting existing solutions to meet the standard may be challenging, it is possible to assess and upgrade individual components or subsystems to align with IEL1-1-62-10.0-01-V.
Does IEL1-1-62-10.0-01-V address environmental considerations in technical solutions?
- IEL1-1-62-10.0-01-V primarily focuses on electrical safety and performance; however, it indirectly promotes energy efficiency and sustainable practices through its requirements.
Where can I find additional resources and support for understanding and applying IEL1-1-62-10.0-01-V in technical solutions?
- Additional resources, including industry guides, training programs, and consulting services, can provide valuable insights and assistance in effectively implementing IEL1-1-62-10.0-01-V in technical solutions.