Power Integrations
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
LNK6665K
Im Detail sehen Datenblätter

LNK6665K - English Editing Encyclopedia Entry

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management IC

Characteristics: - High efficiency - Low standby power consumption - Wide input voltage range - Over-temperature protection - Over-voltage protection - Over-current protection

Package: TO-220

Essence: LNK6665K is a power management integrated circuit designed for efficient power conversion and management in various electronic devices.

Packaging/Quantity: The LNK6665K is typically packaged in a TO-220 package. It is available in reels or tubes, with a quantity of 50 units per reel/tube.

Specifications

The LNK6665K has the following specifications:

  • Input Voltage Range: 85VAC to 265VAC
  • Output Voltage: 5VDC
  • Output Current: Up to 1A
  • Switching Frequency: 66 kHz
  • Standby Power Consumption: Less than 100mW
  • Operating Temperature Range: -40°C to +150°C

Detailed Pin Configuration

The LNK6665K has a standard pin configuration as follows:

  1. VCC - Power supply input
  2. BP/M - Bottom plate/multiplier input
  3. FB - Feedback pin
  4. GND - Ground
  5. D - Drain pin
  6. S - Source pin

Functional Features

The LNK6665K offers the following functional features:

  1. High Efficiency: The integrated circuit is designed to provide high efficiency power conversion, reducing energy loss and improving overall system performance.
  2. Low Standby Power Consumption: The LNK6665K minimizes standby power consumption, ensuring energy efficiency even during idle periods.
  3. Wide Input Voltage Range: With an input voltage range of 85VAC to 265VAC, the LNK6665K can be used in a wide range of applications.
  4. Over-Temperature Protection: The IC incorporates over-temperature protection to prevent damage due to excessive heat.
  5. Over-Voltage and Over-Current Protection: The LNK6665K includes built-in protection mechanisms to safeguard against over-voltage and over-current conditions.

Advantages and Disadvantages

Advantages: - High efficiency power conversion - Low standby power consumption - Wide input voltage range for versatile applications - Built-in protection features for enhanced reliability

Disadvantages: - Limited output current capacity (up to 1A)

Working Principles

The LNK6665K utilizes a flyback topology to convert the input AC voltage to a regulated DC output voltage. It employs a high-voltage MOSFET switch, coupled with a multi-mode controller, to achieve efficient power conversion. The feedback mechanism ensures stable output voltage regulation.

Detailed Application Field Plans

The LNK6665K is suitable for various applications, including but not limited to:

  1. Power supplies for consumer electronics
  2. LED lighting systems
  3. Industrial control systems
  4. Home appliances
  5. Battery chargers

Detailed and Complete Alternative Models

  1. LNK6664K - Similar specifications and features, lower output current capacity (up to 500mA)
  2. LNK6666K - Similar specifications and features, higher output current capacity (up to 1.5A)
  3. LNK6667K - Similar specifications and features, higher output voltage (up to 12VDC)

These alternative models provide options based on specific requirements and desired performance characteristics.

In conclusion, the LNK6665K is a power management integrated circuit that offers high efficiency, low standby power consumption, and a wide input voltage range. It provides reliable power conversion and is suitable for various applications in consumer electronics, lighting systems, industrial control, home appliances, and battery chargers.

Word count: 446 words

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von LNK6665K in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of LNK6665K in technical solutions:

  1. Q: What is LNK6665K? A: LNK6665K is a highly integrated, offline switcher IC designed for low-power applications.

  2. Q: What are the key features of LNK6665K? A: The key features of LNK6665K include primary-side regulation, high efficiency, accurate constant current control, and comprehensive protection features.

  3. Q: What are the typical applications of LNK6665K? A: LNK6665K is commonly used in LED lighting, smart home devices, industrial controls, and other low-power applications.

  4. Q: How does LNK6665K achieve primary-side regulation? A: LNK6665K uses a proprietary algorithm called EcoSmart™ technology that eliminates the need for an optocoupler and secondary feedback circuitry, enabling primary-side regulation.

  5. Q: Can LNK6665K operate in a wide input voltage range? A: Yes, LNK6665K can operate in a wide input voltage range, typically from 85VAC to 265VAC.

  6. Q: Does LNK6665K support dimming functionality for LED lighting applications? A: Yes, LNK6665K supports both analog and PWM dimming methods, making it suitable for various LED lighting dimming requirements.

  7. Q: What is the efficiency of LNK6665K? A: LNK6665K offers high efficiency, typically up to 88%, which helps reduce power consumption and heat dissipation.

  8. Q: What protection features does LNK6665K provide? A: LNK6665K includes protection features such as output overvoltage protection, output short-circuit protection, and thermal shutdown.

  9. Q: Can LNK6665K be used in battery-powered applications? A: No, LNK6665K is designed for offline applications and requires an AC input power source.

  10. Q: Are there any reference designs available for LNK6665K? A: Yes, Power Integrations provides various reference designs and application notes to help engineers implement LNK6665K in their technical solutions.

Please note that the answers provided here are general and may vary depending on specific design requirements and application scenarios.