ON Semiconductor
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
NCP1351DPG
Im Detail sehen Datenblätter

NCP1351DPG - English Editing Encyclopedia Entry

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management IC

Characteristics: - High-performance current mode controller - Designed for offline flyback converters - Provides precise control of the output voltage and current - Offers protection features for overvoltage, overcurrent, and overtemperature conditions

Package: DIP-8 (Dual In-line Package 8)

Essence: The NCP1351DPG is a power management IC that serves as a current mode controller for offline flyback converters. It ensures accurate regulation of the output voltage and current while providing protection against various fault conditions.

Packaging/Quantity: The NCP1351DPG is typically sold in reels or tubes containing multiple units. The exact quantity may vary depending on the supplier.

Specifications

The NCP1351DPG has the following specifications:

  • Input Voltage Range: 8V to 20V
  • Output Voltage Range: 0V to 30V
  • Maximum Output Current: 500mA
  • Operating Temperature Range: -40°C to +125°C
  • Switching Frequency: 50kHz to 300kHz
  • Standby Power Consumption: <100mW

Detailed Pin Configuration

The NCP1351DPG features an 8-pin Dual In-line Package (DIP-8) with the following pin configuration:

  1. VCC: Power supply input
  2. GND: Ground reference
  3. CS: Current sense input
  4. FB: Feedback input for output voltage regulation
  5. COMP: Compensation pin for stability adjustment
  6. RT: Timing resistor connection for switching frequency control
  7. CT: Timing capacitor connection for switching frequency control
  8. OUT: Output pin for driving external power MOSFET

Functional Features

The NCP1351DPG offers the following functional features:

  • Current mode control for improved stability and transient response
  • Adjustable switching frequency for optimization of efficiency and EMI performance
  • Soft-start function to prevent excessive inrush current during startup
  • Overvoltage protection (OVP) to safeguard against voltage spikes
  • Overcurrent protection (OCP) to limit output current during fault conditions
  • Overtemperature protection (OTP) to prevent IC damage due to excessive heat

Advantages and Disadvantages

Advantages: - Precise regulation of output voltage and current - Protection features enhance system reliability - Wide input voltage range allows flexibility in power supply design - Compact DIP-8 package facilitates easy integration into various applications

Disadvantages: - Limited maximum output current may not be suitable for high-power applications - Requires external components for complete power supply implementation - Not compatible with all types of power MOSFETs, requiring careful selection

Working Principles

The NCP1351DPG operates as a current mode controller for offline flyback converters. It utilizes a feedback loop to regulate the output voltage and maintain it at the desired level. The current sense input (CS) monitors the current flowing through the power MOSFET, providing feedback to the controller. By adjusting the duty cycle of the MOSFET's switching operation, the IC controls the energy transfer to the output.

During normal operation, the IC continuously compares the sensed current with a reference value and adjusts the duty cycle accordingly. This ensures stable and accurate regulation of the output voltage. In case of fault conditions such as overvoltage, overcurrent, or overtemperature, the protection features of the NCP1351DPG come into play, safeguarding the system and preventing any potential damage.

Detailed Application Field Plans

The NCP1351DPG is commonly used in various applications, including:

  1. Power supplies for consumer electronics
  2. LED lighting systems
  3. Battery chargers
  4. Industrial control systems
  5. Automotive electronics

Its ability to provide precise voltage and current regulation, along with the built-in protection features, makes it suitable for a wide range of power management applications.

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to the NCP1351DPG are:

  1. UC3843: Current mode PWM controller IC
  2. LT1241: Offline flyback controller IC
  3. TNY267: Enhanced energy-efficient offline switcher IC
  4. FAN7602B: Green-mode PWM controller IC

These alternative models offer similar functionalities and can be used as replacements depending on specific application requirements.

Word Count: 550 words

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von NCP1351DPG in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of NCP1351DPG in technical solutions:

Q1: What is NCP1351DPG? A1: NCP1351DPG is a specific model of integrated circuit (IC) used for power management and control in various technical applications.

Q2: What are the key features of NCP1351DPG? A2: Some key features of NCP1351DPG include high voltage startup, current mode control, built-in protection features, and compatibility with various power supply topologies.

Q3: What technical solutions can NCP1351DPG be used for? A3: NCP1351DPG can be used in various technical solutions such as offline power supplies, LED drivers, battery chargers, and other applications requiring power management and control.

Q4: What is the input voltage range supported by NCP1351DPG? A4: NCP1351DPG supports an input voltage range of typically 8V to 30V, making it suitable for a wide range of applications.

Q5: Can NCP1351DPG handle high power loads? A5: Yes, NCP1351DPG is designed to handle high power loads efficiently, making it suitable for applications that require significant power output.

Q6: Does NCP1351DPG have built-in protection features? A6: Yes, NCP1351DPG incorporates various protection features such as overvoltage protection, overcurrent protection, and thermal shutdown to ensure safe operation.

Q7: Is NCP1351DPG compatible with different power supply topologies? A7: Yes, NCP1351DPG is compatible with various power supply topologies including flyback, forward, and boost converters, providing flexibility in design.

Q8: What is the typical operating frequency of NCP1351DPG? A8: The typical operating frequency of NCP1351DPG is around 100kHz, which can be adjusted based on specific application requirements.

Q9: Can NCP1351DPG be used for dimming LED lights? A9: Yes, NCP1351DPG can be used for dimming LED lights by incorporating appropriate control circuitry and feedback mechanisms.

Q10: Are there any application notes or reference designs available for NCP1351DPG? A10: Yes, the manufacturer of NCP1351DPG typically provides application notes and reference designs that can help engineers in implementing the IC effectively in their technical solutions.

Please note that the answers provided here are general and may vary depending on the specific requirements and datasheet of NCP1351DPG.