ON Semiconductor
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
MPSW45AZL1
Im Detail sehen Datenblätter

MPSW45AZL1

Product Overview

Category

The MPSW45AZL1 belongs to the category of bipolar transistors.

Use

It is commonly used as a general-purpose amplifier or switch in electronic circuits.

Characteristics

  • Low power dissipation
  • High current gain
  • Low noise

Package

The MPSW45AZL1 is available in a TO-92 package.

Essence

This transistor is essential for amplifying and switching signals in electronic devices.

Packaging/Quantity

The MPSW45AZL1 is typically packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Collector-Base Voltage (VCBO): 60V
  • Collector-Emitter Voltage (VCEO): 60V
  • Emitter-Base Voltage (VEBO): 5V
  • Collector Current (IC): 500mA
  • Power Dissipation (PD): 625mW
  • Transition Frequency (ft): 100MHz

Detailed Pin Configuration

The MPSW45AZL1 has three pins: collector, base, and emitter. The pinout configuration is as follows: - Collector (C) - Pin 1 - Base (B) - Pin 2 - Emitter (E) - Pin 3

Functional Features

  • High current gain
  • Low saturation voltage
  • Fast switching speed

Advantages and Disadvantages

Advantages

  • Low power dissipation
  • Versatile applications
  • Reliable performance

Disadvantages

  • Limited power handling capability
  • Susceptible to thermal runaway if not properly managed

Working Principles

The MPSW45AZL1 operates based on the principles of bipolar junction transistors, where the flow of current is controlled by the application of a small input signal at the base terminal, resulting in amplified output at the collector terminal.

Detailed Application Field Plans

The MPSW45AZL1 finds extensive use in various electronic applications, including: - Audio amplifiers - Signal amplification circuits - Switching circuits - Oscillator circuits

Detailed and Complete Alternative Models

Some alternative models to the MPSW45AZL1 include: - BC547 - 2N3904 - 2N2222

In conclusion, the MPSW45AZL1 is a versatile bipolar transistor with applications in amplification and switching circuits. Its low power dissipation and high current gain make it suitable for a wide range of electronic designs.

[Word Count: 320]

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von MPSW45AZL1 in technischen Lösungen auf

  1. What is the MPSW45AZL1 transistor used for?

    • The MPSW45AZL1 is a high voltage NPN transistor commonly used in switching applications and amplification circuits.

  2. What are the key specifications of the MPSW45AZL1 transistor?

    • The MPSW45AZL1 has a maximum collector-emitter voltage of 300V, a continuous collector current of 500mA, and a power dissipation of 625mW.

  3. Can the MPSW45AZL1 be used for high voltage switching applications?

    • Yes, the MPSW45AZL1 is suitable for high voltage switching due to its high collector-emitter voltage rating.

  4. Is the MPSW45AZL1 suitable for audio amplifier circuits?

    • Yes, the MPSW45AZL1 can be used in audio amplifier circuits due to its moderate current and voltage ratings.

  5. What are the typical applications of the MPSW45AZL1 transistor?

    • Typical applications include relay drivers, high voltage switching circuits, audio amplifiers, and general purpose switching.

  6. Does the MPSW45AZL1 require a heat sink for operation?

    • It depends on the specific application and the power dissipation requirements. In high power applications, a heat sink may be necessary.

  7. What are the recommended operating conditions for the MPSW45AZL1?

    • The recommended operating temperature range is -55°C to 150°C, and the maximum junction temperature is 150°C.

  8. Can the MPSW45AZL1 be used in automotive applications?

    • Yes, the MPSW45AZL1 can be used in automotive applications that require high voltage switching or amplification.

  9. Are there any common failure modes associated with the MPSW45AZL1?

    • Common failure modes include thermal runaway due to excessive power dissipation and breakdown under high voltage conditions.

  10. Where can I find detailed application notes for using the MPSW45AZL1 in technical solutions?

    • Detailed application notes and circuit examples can be found in the datasheet provided by the manufacturer or in technical reference manuals for transistor applications.