ON Semiconductor
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
MC10EP16VADR2G
Im Detail sehen Datenblätter

MC10EP16VADR2G

Product Overview

  • Category: Integrated Circuit
  • Use: Signal Conditioning and Data Transmission
  • Characteristics: High-Speed, Low-Power, Differential Receiver
  • Package: 8-Lead VSSOP (Very Small Outline Package)
  • Essence: High-performance differential receiver for data communication applications
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage: 3.0V to 5.5V
  • Input Voltage Range: -2.0V to VCC + 2.0V
  • Operating Temperature Range: -40°C to +85°C
  • Propagation Delay: 400ps typical at 3.3V supply
  • Input Threshold: 100mV typical
  • Output Voltage Swing: 800mV typical at 3.3V supply

Detailed Pin Configuration

The MC10EP16VADR2G has the following pin configuration:

  1. VCC: Power Supply
  2. Q: Complementary Output
  3. /Q: Inverted Complementary Output
  4. D: Differential Input
  5. /D: Inverted Differential Input
  6. VEE: Ground
  7. VBB: Bias Voltage
  8. NC: No Connection

Functional Features

  • High-speed differential receiver with a wide input voltage range
  • Compatible with various logic families such as ECL, PECL, LVPECL, etc.
  • Low-power consumption and high noise immunity
  • Differential inputs provide common-mode noise rejection
  • Output swings rail-to-rail for improved signal integrity

Advantages and Disadvantages

Advantages: - High-speed operation allows for efficient data transmission - Wide input voltage range enables compatibility with different systems - Low-power consumption helps in reducing overall energy usage - Differential inputs provide noise rejection, improving signal quality

Disadvantages: - Limited to applications requiring high-speed data transmission - Requires careful consideration of power supply and biasing requirements - May not be suitable for low-voltage or low-power applications

Working Principles

The MC10EP16VADR2G is a differential receiver that operates by comparing the voltage difference between its two input pins (D and /D). It amplifies and conditions the received differential signals, providing complementary outputs (Q and /Q) with improved signal integrity. The device operates at high speeds and is designed to work with various logic families, making it suitable for data communication applications.

Detailed Application Field Plans

The MC10EP16VADR2G can be used in various applications, including:

  1. High-speed data communication systems
  2. Networking equipment
  3. Telecommunications infrastructure
  4. Industrial automation and control systems
  5. Test and measurement instruments

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the MC10EP16VADR2G include:

  1. MC100EP16: 8-bit differential receiver with similar specifications
  2. MC10EL16: ECL-compatible differential receiver with comparable performance
  3. MC100LVEL16: LVPECL-compatible differential receiver with higher speed capabilities

These alternative models can be considered based on specific application requirements and compatibility with existing systems.

Word count: 330 words

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von MC10EP16VADR2G in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of MC10EP16VADR2G in technical solutions:

  1. Q: What is MC10EP16VADR2G? A: MC10EP16VADR2G is a high-speed differential receiver designed for use in various communication and data transmission applications.

  2. Q: What is the operating voltage range of MC10EP16VADR2G? A: The operating voltage range of MC10EP16VADR2G is typically between -4.2V and -5.7V.

  3. Q: What is the maximum data rate supported by MC10EP16VADR2G? A: MC10EP16VADR2G can support data rates up to 3.2 Gbps, making it suitable for high-speed applications.

  4. Q: Can MC10EP16VADR2G be used in both single-ended and differential signaling systems? A: No, MC10EP16VADR2G is specifically designed for differential signaling systems and is not intended for use with single-ended signals.

  5. Q: What is the typical input voltage swing required for MC10EP16VADR2G? A: The typical input voltage swing required for MC10EP16VADR2G is around 200 mV.

  6. Q: Does MC10EP16VADR2G have built-in termination resistors? A: No, MC10EP16VADR2G does not have built-in termination resistors. External termination resistors may be required depending on the application.

  7. Q: Can MC10EP16VADR2G tolerate overvoltage conditions? A: Yes, MC10EP16VADR2G has built-in protection features that allow it to tolerate overvoltage conditions up to a certain limit.

  8. Q: What is the typical propagation delay of MC10EP16VADR2G? A: The typical propagation delay of MC10EP16VADR2G is around 200 ps, making it suitable for high-speed applications.

  9. Q: Is MC10EP16VADR2G compatible with other logic families? A: Yes, MC10EP16VADR2G is compatible with various ECL (Emitter-Coupled Logic) logic families and can be used in conjunction with them.

  10. Q: What are some common applications of MC10EP16VADR2G? A: MC10EP16VADR2G is commonly used in telecommunications, networking, data centers, and other high-speed communication systems where differential signaling is required.

Please note that these answers are general and may vary depending on specific application requirements and datasheet specifications.