ON Semiconductor
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
MC10ELT24DT
Im Detail sehen Datenblätter

MC10ELT24DT

Product Overview

  • Category: Integrated Circuit
  • Use: Signal Conditioning and Level Shifting
  • Characteristics: High-speed, Low-power, Differential Receiver
  • Package: 8-pin SOIC (Small Outline Integrated Circuit)
  • Essence: Efficient signal conditioning and level shifting for high-speed digital communication systems
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

  • Supply Voltage Range: -4.2V to -5.7V
  • Input Voltage Range: -3.0V to -5.7V
  • Output Voltage Range: -3.0V to -5.7V
  • Operating Temperature Range: -40°C to +85°C
  • Propagation Delay: 1.6 ns typical at VCC = -5.2V, TA = 25°C
  • Input Current: ±10 μA maximum at VCC = -5.2V, VI = -2.0V
  • Output Current: ±50 mA maximum at VCC = -5.2V, VO = -2.0V

Detailed Pin Configuration

The MC10ELT24DT is an 8-pin integrated circuit with the following pin configuration:

  1. VCC: Negative Power Supply
  2. Qn: Complementary Output
  3. Q: Output
  4. GND: Ground
  5. D: Differential Input
  6. /D: Complementary Differential Input
  7. /Q: Complementary Output
  8. /Qn: Output

Functional Features

  • High-speed differential receiver with ECL (Emitter-Coupled Logic) inputs and TTL (Transistor-Transistor Logic) outputs.
  • Provides efficient signal conditioning and level shifting for high-speed digital communication systems.
  • Compatible with various logic families such as PECL (Positive ECL), NECL (Negative ECL), and TTL.
  • Offers excellent noise immunity and signal integrity.

Advantages and Disadvantages

Advantages: - High-speed operation enables reliable data transmission in high-frequency applications. - Low-power consumption makes it suitable for battery-powered devices. - Wide operating temperature range allows for use in extreme environments. - Compatibility with different logic families enhances versatility.

Disadvantages: - Requires negative power supply, which may limit its use in certain systems. - Limited input and output voltage ranges restrict compatibility with some interface standards.

Working Principles

The MC10ELT24DT operates based on the principles of differential signaling. It receives a differential input signal (D and /D) and converts it into a single-ended output signal (Q and /Q). The device utilizes ECL inputs to provide high-speed and low-noise performance. The TTL outputs ensure compatibility with various logic families.

Detailed Application Field Plans

The MC10ELT24DT is commonly used in the following applications:

  1. High-speed data communication systems
  2. Telecommunication equipment
  3. Networking devices
  4. Industrial automation
  5. Test and measurement instruments

Detailed and Complete Alternative Models

  1. MC100ELT24: Similar functionality, but operates at higher supply voltages.
  2. MC10ELT22: Differential receiver with slightly different pin configuration.
  3. MC100ELT23: Differential receiver with additional features like internal biasing.

These alternative models offer similar functionality to the MC10ELT24DT and can be considered as substitutes depending on specific requirements.

Word count: 410 words

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von MC10ELT24DT in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of MC10ELT24DT in technical solutions:

  1. Question: What is MC10ELT24DT?
    Answer: MC10ELT24DT is a high-speed differential ECL (Emitter-Coupled Logic) receiver designed for applications requiring data rates up to 3.0 Gbps.

  2. Question: What are the key features of MC10ELT24DT?
    Answer: Some key features of MC10ELT24DT include low input/output voltage swings, differential inputs with internal 75-ohm termination resistors, and a wide operating temperature range.

  3. Question: What are the typical applications of MC10ELT24DT?
    Answer: MC10ELT24DT is commonly used in high-speed communication systems, such as fiber optic networks, SONET/SDH equipment, and high-speed data transmission applications.

  4. Question: What is the maximum data rate supported by MC10ELT24DT?
    Answer: MC10ELT24DT supports data rates up to 3.0 Gbps, making it suitable for high-speed data transmission requirements.

  5. Question: Can MC10ELT24DT operate at different supply voltages?
    Answer: Yes, MC10ELT24DT can operate at supply voltages ranging from -4.2V to -5.7V, providing flexibility in various system designs.

  6. Question: Does MC10ELT24DT have built-in termination resistors?
    Answer: Yes, MC10ELT24DT has internal 75-ohm termination resistors on its differential inputs, simplifying the design and reducing external component count.

  7. Question: Is MC10ELT24DT compatible with other logic families?
    Answer: MC10ELT24DT is compatible with other ECL logic families, such as MC10ELT22 and MC10ELT21, allowing for seamless integration in mixed-signal systems.

  8. Question: What is the operating temperature range of MC10ELT24DT?
    Answer: MC10ELT24DT can operate within a wide temperature range of -40°C to +85°C, making it suitable for various environmental conditions.

  9. Question: Does MC10ELT24DT have any special power supply requirements?
    Answer: MC10ELT24DT requires a dual power supply configuration, with VCC and VEE voltages typically ranging from -4.2V to -5.7V.

  10. Question: Can MC10ELT24DT be used in low-power applications?
    Answer: MC10ELT24DT is not specifically designed for low-power applications, as it is optimized for high-speed data transmission. However, its power consumption can be managed by controlling the supply voltage levels and using appropriate power management techniques.

Please note that these answers are general and may vary depending on specific application requirements.