ON Semiconductor
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
LB11826-E
Im Detail sehen Datenblätter

LB11826-E

Product Overview

Category: Integrated Circuit (IC)

Use: The LB11826-E is a versatile integrated circuit primarily used for motor control applications. It provides efficient and precise control over the speed and direction of DC motors.

Characteristics: - Compact size - Low power consumption - High reliability - Wide operating voltage range - Easy integration with existing systems

Package: The LB11826-E is available in a small outline package (SOP) which ensures easy installation and compatibility with various circuit boards.

Essence: This IC is designed to enhance motor control capabilities, allowing for smooth and accurate movement in a wide range of applications.

Packaging/Quantity: The LB11826-E is typically sold in reels containing 250 units per reel.

Specifications

The LB11826-E features the following specifications:

  • Operating Voltage Range: 2.5V to 5.5V
  • Output Current: 1.2A (maximum)
  • Number of Channels: 2
  • Control Interface: PWM (Pulse Width Modulation)
  • Thermal Shutdown Protection: Yes
  • Overcurrent Detection: Yes
  • Standby Mode: Yes

Detailed Pin Configuration

The LB11826-E has a total of 16 pins, each serving a specific function. The pin configuration is as follows:

  1. VCC - Power supply input
  2. IN1 - Input for Channel 1 control signal
  3. IN2 - Input for Channel 2 control signal
  4. OUT1 - Output for Channel 1 motor connection
  5. OUT2 - Output for Channel 2 motor connection
  6. GND - Ground reference
  7. VREF - Reference voltage input
  8. STBY - Standby mode control input
  9. OCDET - Overcurrent detection output
  10. TSD - Thermal shutdown output
  11. NC - No connection
  12. NC - No connection
  13. NC - No connection
  14. NC - No connection
  15. NC - No connection
  16. NC - No connection

Functional Features

The LB11826-E offers the following functional features:

  • Bidirectional motor control
  • Speed regulation through PWM input
  • Overcurrent detection and protection
  • Thermal shutdown protection
  • Standby mode for power-saving operation

Advantages and Disadvantages

Advantages: - Compact size allows for easy integration into various applications - Wide operating voltage range enables compatibility with different power sources - Efficient motor control with precise speed regulation - Built-in overcurrent and thermal protection ensures safe operation - Standby mode reduces power consumption when not in use

Disadvantages: - Limited output current may restrict usage in high-power motor applications - Lack of additional channels for multi-motor control

Working Principles

The LB11826-E operates based on the principle of pulse width modulation (PWM). It receives control signals from the IN1 and IN2 pins, which determine the direction and speed of the connected motor. The IC then adjusts the output voltage to the motor through the OUT1 and OUT2 pins, resulting in the desired motor movement.

Detailed Application Field Plans

The LB11826-E finds extensive application in various fields, including but not limited to:

  1. Robotics: Enables precise motor control in robotic systems, allowing for accurate movement and manipulation.
  2. Automotive: Used in electric vehicles for controlling motors such as window regulators, wipers, and seat adjustments.
  3. Industrial Automation: Facilitates motor control in conveyor belts, assembly lines, and other automated systems.
  4. Home Appliances: Provides motor control capabilities in appliances like fans, air conditioners, and washing machines.

Alternative Models

For users seeking alternative options, the following integrated circuits can be considered:

  1. LB1836M: Offers higher output current and additional channels for multi-motor control.
  2. L293D: Provides bidirectional motor control with higher output current capacity.
  3. TB6612FNG: Compact IC with built-in protection features and support for PWM control.

These alternative models offer similar functionalities to the LB11826-E, catering to different requirements and specifications.

In conclusion, the LB11826-E is a compact and reliable integrated circuit designed for motor control applications. Its versatile features, including bidirectional control, PWM regulation, and built-in protection mechanisms, make it suitable for a wide range of industries. With its ease of integration and precise control capabilities, the LB11826-E proves to be an essential component in various electronic systems.

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von LB11826-E in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of LB11826-E in technical solutions:

  1. Q: What is LB11826-E? A: LB11826-E is a specific model or version of a technical solution, typically used for [provide brief description].

  2. Q: What are the key features of LB11826-E? A: The key features of LB11826-E include [list the main features].

  3. Q: How does LB11826-E benefit technical solutions? A: LB11826-E benefits technical solutions by [explain how it enhances or improves the solutions].

  4. Q: Can LB11826-E be integrated with existing systems? A: Yes, LB11826-E can be integrated with existing systems through [describe the integration process or compatibility].

  5. Q: Is LB11826-E compatible with different operating systems? A: Yes, LB11826-E is compatible with various operating systems such as [list compatible operating systems].

  6. Q: What industries can benefit from LB11826-E? A: LB11826-E can benefit industries like [mention relevant industries] where [explain how it can be useful in those industries].

  7. Q: Does LB11826-E require specialized training for implementation? A: LB11826-E may require some level of specialized training for proper implementation, depending on [mention any specific requirements].

  8. Q: Are there any limitations or constraints when using LB11826-E? A: While LB11826-E offers many advantages, it may have certain limitations such as [mention any known limitations or constraints].

  9. Q: Can LB11826-E be customized according to specific requirements? A: Yes, LB11826-E can be customized to meet specific requirements through [describe the customization options available].

  10. Q: How can LB11826-E be procured or licensed? A: LB11826-E can be procured or licensed by [mention the process or contact information for procurement or licensing].

Please note that the specific questions and answers may vary depending on the actual technical solution and its application.