The 74ABT573CMSAX belongs to the category of integrated circuits (ICs) and specifically falls under the family of ABT series ICs.
This IC is commonly used in digital electronic systems for data storage and transfer applications. It serves as an octal transparent latch with 3-state outputs.
The 74ABT573CMSAX is available in a small outline package (SOT) known as SOIC (Small Outline Integrated Circuit). The package dimensions are typically 7.5mm x 10.3mm.
The essence of the 74ABT573CMSAX lies in its ability to store and transfer digital data efficiently within electronic systems. It provides a reliable and high-speed solution for latching and output control.
The IC is usually supplied in tape and reel packaging, with a standard quantity of 2500 units per reel.
The 74ABT573CMSAX has a total of 20 pins, each serving a specific function. The pin configuration is as follows:
The 74ABT573CMSAX offers the following functional features:
The 74ABT573CMSAX operates based on the principle of transparent latching. When the latch enable (LE) input is high, the data inputs (D0-D7) are transferred to the corresponding outputs (Q0-Q7) based on the clock (CLK) signal. The output enable (OE) input controls the state of the outputs, allowing them to be either active or in a high-impedance state.
The 74ABT573CMSAX finds extensive use in various digital electronic systems, including but not limited to:
Sure! Here are 10 common questions and answers related to the application of 74ABT573CMSAX in technical solutions:
Q: What is the 74ABT573CMSAX? A: The 74ABT573CMSAX is a octal transparent latch with 3-state outputs, commonly used in digital circuits.
Q: What is the purpose of the 74ABT573CMSAX? A: The purpose of this IC is to store and control the flow of data in a digital system.
Q: How many bits can the 74ABT573CMSAX handle? A: It can handle 8 bits of data, as it is an octal latch.
Q: What does "transparent" mean in the context of the 74ABT573CMSAX? A: "Transparent" means that the input data is directly transferred to the output when the latch is enabled.
Q: What are the 3-state outputs in the 74ABT573CMSAX? A: The 3-state outputs allow the outputs to be in three different states: high, low, or high impedance (disconnected).
Q: How do I enable or disable the 74ABT573CMSAX latch? A: The latch is enabled by applying a high signal to the enable pin (EN), and disabled by applying a low signal.
Q: Can the 74ABT573CMSAX be cascaded to handle more than 8 bits? A: Yes, multiple 74ABT573CMSAX latches can be cascaded together to handle larger data widths.
Q: What is the power supply voltage range for the 74ABT573CMSAX? A: The power supply voltage range is typically between 4.5V and 5.5V.
Q: What is the maximum operating frequency of the 74ABT573CMSAX? A: The maximum operating frequency is typically around 200 MHz.
Q: Can the 74ABT573CMSAX be used in both synchronous and asynchronous systems? A: Yes, it can be used in both synchronous and asynchronous systems, depending on the application requirements.
Please note that these answers are general and may vary depending on the specific datasheet and manufacturer's specifications for the 74ABT573CMSAX.