ON Semiconductor
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
2N5210TA
Im Detail sehen Datenblätter

2N5210TA Transistor

Product Overview

The 2N5210TA is a bipolar junction transistor (BJT) belonging to the category of small-signal transistors. It is commonly used for amplification and switching applications due to its high frequency and low power characteristics. The transistor comes in a TO-92 package and is available in various packaging quantities. Its essence lies in its ability to amplify weak signals and control larger currents.

Specifications

  • Maximum Collector-Emitter Voltage: 40V
  • Maximum Collector Current: 200mA
  • Power Dissipation: 625mW
  • Transition Frequency: 250MHz
  • Package Type: TO-92
  • Packaging Quantity: Varies

Detailed Pin Configuration

The 2N5210TA transistor has three pins: 1. Base (B) 2. Emitter (E) 3. Collector (C)

Functional Features

  • High transition frequency for use in high-frequency applications
  • Low power consumption
  • Small form factor for space-constrained designs

Advantages and Disadvantages

Advantages

  • High frequency capability
  • Low power consumption
  • Compact size

Disadvantages

  • Limited maximum collector current
  • Moderate voltage rating

Working Principles

The 2N5210TA operates based on the principles of amplification and control of current flow. When a small signal is applied to the base terminal, it controls the larger current flowing between the collector and emitter terminals, allowing for signal amplification.

Detailed Application Field Plans

The 2N5210TA transistor finds extensive use in the following applications: - Audio amplifiers - Radio frequency (RF) circuits - Oscillators - Switching circuits

Detailed and Complete Alternative Models

Some alternative models to the 2N5210TA include: - 2N3904 - BC547 - 2N2222

In conclusion, the 2N5210TA transistor is a versatile component suitable for various amplification and switching applications, especially in high-frequency circuits. Its compact size and low power consumption make it an ideal choice for space-constrained designs. However, its limited maximum collector current and moderate voltage rating should be considered when selecting this transistor for specific applications.

[Word count: 286]

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von 2N5210TA in technischen Lösungen auf

  1. What is the 2N5210TA transistor used for?

    • The 2N5210TA is a general-purpose PNP bipolar junction transistor commonly used in amplification and switching applications.

  2. What are the key specifications of the 2N5210TA transistor?

    • The 2N5210TA has a maximum collector current of 500mA, a maximum collector-emitter voltage of 80V, and a maximum power dissipation of 625mW.

  3. Can the 2N5210TA be used for audio amplifier circuits?

    • Yes, the 2N5210TA can be used in low-power audio amplifier circuits due to its moderate power handling capabilities and low noise characteristics.

  4. Is the 2N5210TA suitable for switching applications?

    • Yes, the 2N5210TA can be used in low-frequency switching applications due to its moderate speed and current-handling capabilities.

  5. What are the typical operating conditions for the 2N5210TA?

    • The 2N5210TA is typically operated at a collector current of 100-200mA, a collector-emitter voltage of 20-50V, and a base current of 5-50mA.

  6. Does the 2N5210TA require a heat sink for operation?

    • For high-power or continuous operation, a heat sink may be required to ensure the 2N5210TA stays within its safe operating temperature range.

  7. Can the 2N5210TA be used in automotive applications?

    • Yes, the 2N5210TA can be used in automotive electronic systems such as engine control units, lighting controls, and sensor interfaces.

  8. What are the common alternatives to the 2N5210TA?

    • Common alternatives to the 2N5210TA include the 2N3906, BC557, and BC327 transistors, which offer similar PNP characteristics.

  9. Are there any known reliability issues with the 2N5210TA?

    • The 2N5210TA is known for its reliable performance when operated within its specified limits, making it a popular choice for various technical solutions.

  10. Where can I find detailed application notes for using the 2N5210TA in technical solutions?

    • Detailed application notes for the 2N5210TA can be found in the manufacturer's datasheet, as well as in technical reference books and online resources dedicated to transistor applications.