NXP USA Inc.
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
P89V51RC2FN,112
Im Detail sehen Datenblätter

P89V51RC2FN,112

Basic Information Overview

  • Category: Microcontroller
  • Use: Embedded systems, industrial automation, consumer electronics
  • Characteristics: 8-bit microcontroller, high-performance, low-power consumption
  • Package: PLCC44
  • Essence: Control and process data in various electronic devices
  • Packaging/Quantity: Bulk packaging, quantity varies

Specifications

  • Architecture: 8051
  • CPU Speed: 40 MHz
  • Flash Memory: 64 KB
  • RAM: 1 KB
  • I/O Pins: 32
  • Timers/Counters: 3
  • UART: 1
  • ADC: 8 channels, 10-bit resolution
  • Operating Voltage: 2.7V to 5.5V

Detailed Pin Configuration

  1. P0.0 - Port 0, Pin 0
  2. P0.1 - Port 0, Pin 1
  3. P0.2 - Port 0, Pin 2
  4. P0.3 - Port 0, Pin 3
  5. P0.4 - Port 0, Pin 4
  6. P0.5 - Port 0, Pin 5
  7. P0.6 - Port 0, Pin 6
  8. P0.7 - Port 0, Pin 7
  9. RST - Reset Pin
  10. P1.0 - Port 1, Pin 0
  11. P1.1 - Port 1, Pin 1
  12. P1.2 - Port 1, Pin 2
  13. P1.3 - Port 1, Pin 3
  14. P1.4 - Port 1, Pin 4
  15. P1.5 - Port 1, Pin 5
  16. P1.6 - Port 1, Pin 6
  17. P1.7 - Port 1, Pin 7
  18. XTAL1 - Crystal Oscillator Input
  19. XTAL2 - Crystal Oscillator Output
  20. P2.0 - Port 2, Pin 0
  21. P2.1 - Port 2, Pin 1
  22. P2.2 - Port 2, Pin 2
  23. P2.3 - Port 2, Pin 3
  24. P2.4 - Port 2, Pin 4
  25. P2.5 - Port 2, Pin 5
  26. P2.6 - Port 2, Pin 6
  27. P2.7 - Port 2, Pin 7
  28. EA/VPP - External Access Enable/Voltage Programming Pin
  29. ALE/PROG - Address Latch Enable/Program Pin
  30. PSEN - Program Store Enable Pin
  31. P3.0 - Port 3, Pin 0
  32. P3.1 - Port 3, Pin 1
  33. P3.2 - Port 3, Pin 2
  34. P3.3 - Port 3, Pin 3
  35. P3.4 - Port 3, Pin 4
  36. P3.5 - Port 3, Pin 5
  37. P3.6 - Port 3, Pin 6
  38. P3.7 - Port 3, Pin 7
  39. RXD - Serial Data Input
  40. TXD - Serial Data Output
  41. INT0 - External Interrupt 0
  42. INT1 - External Interrupt 1
  43. T0 - Timer 0 External Input
  44. T1 - Timer 1 External Input

Functional Features

  • High-performance 8-bit microcontroller with 8051 architecture
  • Wide operating voltage range for flexibility in various applications
  • Flash memory allows easy reprogramming of the device
  • Multiple I/O pins and timers/counters for versatile functionality
  • UART for serial communication
  • ADC for analog signal processing

Advantages

  • High-speed operation at 40 MHz
  • Low-power consumption for energy-efficient designs
  • Ample flash memory for program storage
  • Versatile I/O capabilities for interfacing with external devices
  • Robust architecture suitable for industrial applications

Disadvantages

  • Limited RAM capacity (1 KB)
  • Limited number of I/O pins (32)
  • Lack of advanced features compared to more modern microcontrollers

Working Principles

The P89V51RC2FN,112 microcontroller operates based on the 8051 architecture. It executes instructions stored in its flash memory, processes data from various sources, and controls the connected electronic devices accordingly. The microcontroller communicates with external devices through its I/O pins, UART, and ADC.

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von P89V51RC2FN,112 in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of P89V51RC2FN,112 in technical solutions:

  1. Q: What is P89V51RC2FN,112? A: P89V51RC2FN,112 is a microcontroller from NXP Semiconductors that is widely used in various technical solutions.

  2. Q: What are the key features of P89V51RC2FN,112? A: Some key features include 8-bit CPU, 64KB Flash memory, 1KB RAM, UART, SPI, I2C interfaces, and multiple timers/counters.

  3. Q: How can I program P89V51RC2FN,112? A: P89V51RC2FN,112 can be programmed using an ISP (In-System Programming) interface or through a parallel programmer.

  4. Q: Can I use C language to program P89V51RC2FN,112? A: Yes, you can use C language along with the Keil C51 compiler or other compatible compilers to program P89V51RC2FN,112.

  5. Q: What are some typical applications of P89V51RC2FN,112? A: P89V51RC2FN,112 is commonly used in applications like industrial automation, home automation, robotics, automotive systems, etc.

  6. Q: Does P89V51RC2FN,112 support interrupts? A: Yes, P89V51RC2FN,112 supports both external and internal interrupts, allowing for efficient event-driven programming.

  7. Q: Can I connect P89V51RC2FN,112 to the internet? A: While P89V51RC2FN,112 doesn't have built-in internet connectivity, you can interface it with external modules like Ethernet or Wi-Fi for internet connectivity.

  8. Q: How many I/O pins does P89V51RC2FN,112 have? A: P89V51RC2FN,112 has a total of 32 I/O pins, which can be used for various input/output operations.

  9. Q: Is P89V51RC2FN,112 suitable for low-power applications? A: Yes, P89V51RC2FN,112 offers power-saving features like idle mode and power-down mode, making it suitable for low-power applications.

  10. Q: Can I use P89V51RC2FN,112 in battery-powered devices? A: Yes, P89V51RC2FN,112 can be used in battery-powered devices as it has low power consumption and supports power-saving modes.

Please note that these answers are general and may vary depending on the specific requirements and implementation of the technical solution.