NXP USA Inc.
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
MMA8652FCR1
Im Detail sehen Datenblätter

MMA8652FCR1

Introduction

The MMA8652FCR1 is a versatile accelerometer sensor designed for various applications in the field of motion sensing and control. This entry provides an overview of the product, including its category, use, characteristics, package, essence, packaging/quantity, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Product Overview

  • Category: Accelerometer Sensor
  • Use: Motion Sensing and Control
  • Characteristics: High sensitivity, Low power consumption, Small form factor
  • Package: LGA (Land Grid Array)
  • Essence: Detecting and measuring acceleration in three dimensions
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Sensitivity: ±2g, ±4g, ±8g, ±16g selectable full-scale ranges
  • Operating Voltage: 1.95V to 3.6V
  • Current Consumption: 6μA in low-power mode
  • Output Data Rate: 1.56 Hz to 800 Hz
  • Digital Interface: I2C, SPI

Detailed Pin Configuration

The MMA8652FCR1 features a 16-pin LGA package with the following pin configuration: 1. VDD 2. INT1 3. SDA/SDI 4. SCL/SCLK 5. GND 6. XOUT 7. NC 8. NC 9. NC 10. NC 11. NC 12. NC 13. NC 14. NC 15. NC 16. NC

Functional Features

  • Three-axis accelerometer
  • Motion detection and free-fall detection
  • Auto-wake and sleep functions
  • Orientation detection

Advantages and Disadvantages

Advantages

  • Low power consumption
  • Wide operating voltage range
  • High sensitivity

Disadvantages

  • Limited maximum full-scale range options
  • Requires external pull-up resistors for I2C communication

Working Principles

The MMA8652FCR1 operates based on the principle of capacitive micro-machined accelerometer technology. It utilizes a built-in MEMS (Micro-Electro-Mechanical Systems) structure to detect and measure acceleration along three orthogonal axes.

Detailed Application Field Plans

The MMA8652FCR1 finds applications in various fields, including: - Consumer Electronics: Mobile devices, gaming controllers - Industrial Automation: Motion-controlled machinery - Automotive: Vehicle stability control systems - Healthcare: Wearable fitness trackers

Alternative Models

For users seeking alternatives to the MMA8652FCR1, the following models can be considered: - MMA8452Q: Similar performance with different package options - ADXL345: Higher full-scale range options - BMA250E: Lower power consumption with comparable performance

In conclusion, the MMA8652FCR1 offers a compact and efficient solution for motion sensing and control applications, with its high sensitivity and low power consumption making it suitable for a wide range of industries and products.

[Word Count: 452]

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von MMA8652FCR1 in technischen Lösungen auf

  1. What is the MMA8652FCR1 accelerometer used for?

    • The MMA8652FCR1 accelerometer is commonly used to measure acceleration, tilt, and motion in various technical solutions.

  2. What is the operating voltage range of the MMA8652FCR1?

    • The operating voltage range of the MMA8652FCR1 is typically between 1.95V and 3.6V.

  3. Can the MMA8652FCR1 be used for vibration monitoring?

    • Yes, the MMA8652FCR1 can be used for vibration monitoring due to its high sensitivity and low noise performance.

  4. What communication interfaces does the MMA8652FCR1 support?

    • The MMA8652FCR1 supports both I2C and SPI communication interfaces, providing flexibility for integration into different systems.

  5. Is the MMA8652FCR1 suitable for battery-powered applications?

    • Yes, the MMA8652FCR1's low power consumption makes it well-suited for battery-powered applications, extending the device's operational lifetime.

  6. What is the resolution of the MMA8652FCR1?

    • The MMA8652FCR1 has a resolution of up to 14 bits, allowing for precise measurement of acceleration and motion.

  7. Can the MMA8652FCR1 be used for impact detection in industrial equipment?

    • Yes, the MMA8652FCR1's high shock survivability and configurable thresholds make it suitable for impact detection in industrial equipment.

  8. Does the MMA8652FCR1 include built-in motion detection features?

    • Yes, the MMA8652FCR1 includes built-in motion detection and freefall detection features, enhancing its applicability in various technical solutions.

  9. What are the typical applications of the MMA8652FCR1 in automotive systems?

    • In automotive systems, the MMA8652FCR1 is often used for vehicle stability control, rollover detection, and airbag deployment algorithms.

  10. Is the MMA8652FCR1 compatible with common microcontrollers?

    • Yes, the MMA8652FCR1 is compatible with common microcontrollers, simplifying its integration into a wide range of technical solutions.