NXP USA Inc.
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
MC68HC908MR8CDW
Im Detail sehen Datenblätter

MC68HC908MR8CDW

Product Overview

  • Category: Microcontroller
  • Use: Embedded systems, control applications
  • Characteristics: Low power consumption, high performance, small size
  • Package: CDIP (Ceramic Dual In-line Package)
  • Essence: 8-bit microcontroller with integrated peripherals
  • Packaging/Quantity: Tray packaging, quantity varies

Specifications

  • Architecture: 8-bit
  • CPU Speed: Up to 8 MHz
  • Program Memory Size: 8 KB
  • RAM Size: 512 bytes
  • Data EEPROM Size: 128 bytes
  • Operating Voltage Range: 2.7V to 5.5V
  • Number of I/O Pins: 20
  • Timers/Counters: 2 x 8-bit, 1 x 16-bit
  • Communication Interfaces: SPI, SCI/IIC
  • Analog-to-Digital Converter (ADC): 8 channels, 10-bit resolution

Detailed Pin Configuration

The MC68HC908MR8CDW has a total of 28 pins. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. VSS - Ground
  3. RESET - Reset input
  4. IRQ - Interrupt request input
  5. PTA0 - General-purpose I/O pin
  6. PTA1 - General-purpose I/O pin
  7. PTA2 - General-purpose I/O pin
  8. PTA3 - General-purpose I/O pin
  9. PTA4 - General-purpose I/O pin
  10. PTA5 - General-purpose I/O pin
  11. PTA6 - General-purpose I/O pin
  12. PTA7 - General-purpose I/O pin
  13. PTB0 - General-purpose I/O pin
  14. PTB1 - General-purpose I/O pin
  15. PTB2 - General-purpose I/O pin
  16. PTB3 - General-purpose I/O pin
  17. PTB4 - General-purpose I/O pin
  18. PTB5 - General-purpose I/O pin
  19. PTB6 - General-purpose I/O pin
  20. PTB7 - General-purpose I/O pin
  21. VPP - Programming voltage input
  22. OSC1 - Crystal oscillator input
  23. OSC2 - Crystal oscillator output
  24. SCI/IIC - Serial communication interface/I2C bus
  25. SPI - Serial peripheral interface
  26. ADC0 - Analog-to-digital converter input
  27. ADC1 - Analog-to-digital converter input
  28. ADC2 - Analog-to-digital converter input

Functional Features

  • Integrated 8-bit CPU with a wide range of instructions
  • Low power consumption for battery-powered applications
  • Multiple communication interfaces for data transfer
  • On-chip analog-to-digital converter for sensor interfacing
  • Timers and counters for precise timing control
  • Interrupt capability for handling real-time events
  • Flexible I/O pins for interfacing with external devices

Advantages and Disadvantages

Advantages: - Low power consumption makes it suitable for battery-powered applications - Compact size allows for easy integration into small devices - Integrated peripherals reduce the need for external components - Wide operating voltage range provides flexibility in power supply options

Disadvantages: - Limited program memory size may restrict the complexity of applications - 8-bit architecture may not be sufficient for demanding computational tasks - Limited number of I/O pins may require additional circuitry for larger projects

Working Principles

The MC68HC908MR8CDW operates based on an 8-bit architecture, where instructions are executed sequentially by the integrated CPU. It utilizes a combination of registers, memory, and peripherals to perform various tasks. The microcontroller can be programmed using assembly language or high-level languages, allowing developers to create custom applications.

During operation, the microcontroller interacts with external devices through its I/O pins and communication interfaces. It can read sensor data, control actuators, and communicate with other devices using protocols such as SPI or SCI/IIC. The integrated timers and counters enable precise timing control, while the analog-to-digital converter allows for the conversion of analog signals into digital values.

Detailed Application Field Plans

The MC68HC908MR8CDW is widely used in various embedded systems and control applications, including but not limited to:

  1. Home automation systems
  2. Industrial control systems
  3. Automotive electronics
  4. Medical devices
  5. Consumer electronics
  6. Internet of Things (IoT) devices

Its small size, low power consumption, and integrated peripherals make it suitable for applications where space and power efficiency are crucial. The microcontroller's flexibility and wide operating voltage range allow it to be utilized in diverse environments and industries.

Detailed and Complete Alternative Models

  • MC68HC908MR8CFB: Similar specifications, different package (QFP

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von MC68HC908MR8CDW in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of MC68HC908MR8CDW in technical solutions:

  1. Q: What is MC68HC908MR8CDW? A: MC68HC908MR8CDW is a microcontroller from the HC08 family, manufactured by Freescale (now NXP). It is commonly used in various technical solutions.

  2. Q: What are the key features of MC68HC908MR8CDW? A: Some key features of MC68HC908MR8CDW include an 8-bit CPU, 8KB of flash memory, 256 bytes of RAM, multiple I/O ports, timers, and analog-to-digital converters.

  3. Q: What are the typical applications of MC68HC908MR8CDW? A: MC68HC908MR8CDW is often used in applications such as automotive systems, industrial control, consumer electronics, and home automation.

  4. Q: How can I program MC68HC908MR8CDW? A: MC68HC908MR8CDW can be programmed using assembly language or high-level languages like C. You will need a compatible programmer and development environment.

  5. Q: Can MC68HC908MR8CDW communicate with other devices? A: Yes, MC68HC908MR8CDW supports various communication protocols such as SPI, I2C, and UART, allowing it to communicate with other devices like sensors, displays, and peripherals.

  6. Q: Is MC68HC908MR8CDW suitable for low-power applications? A: Yes, MC68HC908MR8CDW has power-saving features like multiple sleep modes and low-power consumption, making it suitable for battery-powered or energy-efficient applications.

  7. Q: Can MC68HC908MR8CDW handle analog signals? A: Yes, MC68HC908MR8CDW has built-in analog-to-digital converters (ADCs) that can convert analog signals into digital values for processing.

  8. Q: How reliable is MC68HC908MR8CDW in harsh environments? A: MC68HC908MR8CDW is designed to operate reliably in a wide temperature range and can withstand moderate levels of shock and vibration, making it suitable for industrial applications.

  9. Q: Are there any development tools available for MC68HC908MR8CDW? A: Yes, NXP provides development tools like IDEs (Integrated Development Environments), compilers, debuggers, and evaluation boards specifically designed for MC68HC908MR8CDW.

  10. Q: Where can I find additional resources and support for MC68HC908MR8CDW? A: You can refer to the official documentation, datasheets, application notes, and user manuals provided by NXP. Additionally, online forums and communities dedicated to embedded systems can be helpful for support and troubleshooting.