Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
KMPC855TVR80D4

KMPC855TVR80D4

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Microprocessor
  • Characteristics:
    • High performance
    • Low power consumption
    • Advanced architecture
  • Package: Ceramic package
  • Essence: Central processing unit (CPU)
  • Packaging/Quantity: Single unit

Specifications

  • Model: KMPC855TVR80D4
  • Manufacturer: KM Electronics
  • Architecture: RISC (Reduced Instruction Set Computing)
  • Clock Speed: 80 MHz
  • Data Bus Width: 32 bits
  • Address Bus Width: 32 bits
  • Cache Memory: 8 KB
  • Operating Voltage: 3.3V
  • Operating Temperature: -40°C to +85°C

Detailed Pin Configuration

The KMPC855TVR80D4 microprocessor has the following pin configuration:

  1. VCC
  2. GND
  3. Address Bus (A0-A31)
  4. Data Bus (D0-D31)
  5. Control Signals (RD, WR, CS, etc.)
  6. Clock Input (CLK)
  7. Reset (RESET)
  8. Interrupt Request (IRQ)
  9. Power Management Signals (PM[0-3])
  10. Miscellaneous Control Signals

Functional Features

  • High-performance execution of complex instructions
  • Efficient data processing capabilities
  • Support for multiple operating modes
  • Built-in memory management unit (MMU) for virtual memory support
  • On-chip cache for faster access to frequently used data
  • Integrated peripherals for enhanced functionality

Advantages and Disadvantages

Advantages: - High processing speed - Low power consumption - Advanced architecture for efficient execution - Support for virtual memory - Integrated peripherals reduce external component count

Disadvantages: - Limited cache memory size - Relatively high operating temperature range

Working Principles

The KMPC855TVR80D4 microprocessor operates based on the RISC architecture. It fetches instructions from memory, decodes them, and executes them using its internal ALU (Arithmetic Logic Unit). The processor communicates with external devices through its various pins, exchanging data and control signals.

Detailed Application Field Plans

The KMPC855TVR80D4 microprocessor finds applications in various fields, including:

  1. Embedded Systems:

    • Industrial automation
    • Automotive electronics
    • Consumer electronics
  2. Networking Equipment:

    • Routers
    • Switches
    • Network appliances
  3. Communication Systems:

    • Wireless base stations
    • Voice over IP (VoIP) gateways
    • Network switches

Detailed and Complete Alternative Models

  1. KMPC855TVR66D4:

    • Clock Speed: 66 MHz
    • Cache Memory: 4 KB
  2. KMPC855TVR100D4:

    • Clock Speed: 100 MHz
    • Cache Memory: 8 KB
  3. KMPC855TVR133D4:

    • Clock Speed: 133 MHz
    • Cache Memory: 16 KB
  4. KMPC855TVR200D4:

    • Clock Speed: 200 MHz
    • Cache Memory: 32 KB

These alternative models offer different clock speeds and cache memory sizes to cater to varying performance requirements.

(Note: The above information is for illustrative purposes only and may not represent actual alternative models available in the market.)


Word Count: 409

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von KMPC855TVR80D4 in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of KMPC855TVR80D4 in technical solutions:

  1. Q: What is KMPC855TVR80D4? A: KMPC855TVR80D4 is a microprocessor chip manufactured by Freescale (now NXP) that belongs to the PowerQUICC family.

  2. Q: What are the key features of KMPC855TVR80D4? A: Some key features of KMPC855TVR80D4 include a PowerPC core, clock speed of 80 MHz, integrated memory controller, multiple communication interfaces, and support for various peripherals.

  3. Q: What are the typical applications of KMPC855TVR80D4? A: KMPC855TVR80D4 is commonly used in networking equipment, industrial automation systems, telecommunications devices, and embedded systems where real-time processing and connectivity are required.

  4. Q: What programming languages can be used to develop software for KMPC855TVR80D4? A: Software for KMPC855TVR80D4 can be developed using languages like C, C++, and assembly language.

  5. Q: Does KMPC855TVR80D4 support operating systems? A: Yes, KMPC855TVR80D4 supports various operating systems such as VxWorks, Linux, and QNX.

  6. Q: Can KMPC855TVR80D4 handle multiple communication protocols? A: Yes, KMPC855TVR80D4 has built-in support for multiple communication protocols like Ethernet, UART, SPI, I2C, and CAN.

  7. Q: What is the power consumption of KMPC855TVR80D4? A: The power consumption of KMPC855TVR80D4 depends on the operating conditions, but it typically ranges from a few watts to tens of watts.

  8. Q: Can KMPC855TVR80D4 be used in harsh environments? A: Yes, KMPC855TVR80D4 is designed to operate reliably in industrial environments with extended temperature ranges and high levels of vibration and shock.

  9. Q: Are there any development tools available for KMPC855TVR80D4? A: Yes, NXP provides development tools like CodeWarrior IDE, debuggers, and emulators specifically designed for programming and debugging KMPC855TVR80D4-based systems.

  10. Q: Is KMPC855TVR80D4 still in production? A: As of my knowledge, KMPC855TVR80D4 is no longer in production. It has been succeeded by newer generations of PowerQUICC processors.