The 74ABT16823ADGG,118 belongs to the category of integrated circuits (ICs).
This IC is commonly used in digital electronic systems for data storage and manipulation.
The 74ABT16823ADGG,118 is available in a small-sized dual in-line package (DIP) or surface mount package (SMD).
This IC serves as a bidirectional transceiver with 18-bit universal bus interface capability.
The 74ABT16823ADGG,118 is typically packaged in reels or tubes, containing a specific quantity per package. The exact packaging and quantity may vary depending on the supplier.
The 74ABT16823ADGG,118 has a total of 48 pins. The pin configuration is as follows:
The 74ABT16823ADGG,118 operates based on the principles of digital logic. It utilizes a bidirectional transceiver design to enable data transfer between a bus and a latch. The direction of data flow is controlled by an enable input signal. The IC's internal circuitry ensures high-speed operation while maintaining low power consumption.
The 74ABT16823ADGG,118 finds application in various digital electronic systems, including but not limited to: - Microcontrollers - Data communication devices - Memory modules - Industrial automation systems
Sure! Here are 10 common questions and answers related to the application of 74ABT16823ADGG,118 in technical solutions:
1. What is the function of the 74ABT16823ADGG,118? The 74ABT16823ADGG,118 is a 16-bit bus transceiver with 3-state outputs. It can be used to enable bidirectional transfer of data between two buses.
2. What is the voltage range supported by the 74ABT16823ADGG,118? The 74ABT16823ADGG,118 supports a voltage range of 4.5V to 5.5V.
3. How many inputs and outputs does the 74ABT16823ADGG,118 have? The 74ABT16823ADGG,118 has 16 inputs and 16 outputs.
4. Can the 74ABT16823ADGG,118 be used for level shifting? Yes, the 74ABT16823ADGG,118 can be used for level shifting as it supports both TTL and CMOS voltage levels.
5. What is the maximum data transfer rate supported by the 74ABT16823ADGG,118? The 74ABT16823ADGG,118 supports a maximum data transfer rate of 200MHz.
6. Does the 74ABT16823ADGG,118 have built-in ESD protection? Yes, the 74ABT16823ADGG,118 has built-in ESD protection to prevent damage from electrostatic discharge.
7. Can the 74ABT16823ADGG,118 be used in high-speed applications? Yes, the 74ABT16823ADGG,118 is designed for high-speed operation and can be used in various high-speed applications.
8. What is the power supply voltage required for the 74ABT16823ADGG,118? The 74ABT16823ADGG,118 requires a power supply voltage of 4.5V to 5.5V.
9. Does the 74ABT16823ADGG,118 support hot insertion? Yes, the 74ABT16823ADGG,118 supports hot insertion, allowing it to be inserted or removed from a live circuit without causing damage.
10. Can the 74ABT16823ADGG,118 be used in automotive applications? Yes, the 74ABT16823ADGG,118 is suitable for automotive applications as it meets the necessary requirements for automotive electronics.
Please note that these answers are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and consult with technical experts for accurate information.